Filter Results By:

Products

Applications

Manufacturers

Meters

sense and display measures of gas, water, electricity, particles, vibration or light.


Showing results 316 - 330 of 4277 products found.

  • Benchtop Meters

    ALVI Technologies

    Fullcheck automatically checks the device functions during power-on.Possible to document the operablility and the regular maintenance and calibration of the meterSensoface monitors the sensor and the measuring equipment and provides information on sensor selection and hanglingUnknown cell constants can easily be determined with a standard calibrationEMC design protects the meter from electromagnetic interference ensuring reliable measurement results even under unfavorable conditions.Measuring input is automatically switched over to the appropriate operating mode.Via the standard RS 232 interface your data can be immediately processed by a computer.DatasheetRelated Products

  • Conductivity Meters

    HD 2306.0 - Delta OHM S.r.L.

    The Conductivity meter – Thermometer Model HD2306.0 is a portable instrument, fitted with a large LCD display for excellent visualization of the measured data, that allows measurement of the following: • conductivity; • liquid resistivity; • total dissolved solids (TDS); with combined 4-ring or 2-ring conductivity/temperature probes. Temperature only is measured by Pt100 or Pt1000 immersion, penetration or contact probes. The probe calibration can be performed automatically in one or more of the 147μS, 1413μS, 12880μS or 111,800μS/cm conductivity calibration solutions (see chapter 4).

  • Chloride Meters

    PCLM3 - Jenway

    he PCLM3 chloride meter can be used to determine chloride concentrations in numerous types of samples. Biological samples such as serum, plasma, urine, sweat and cerebrospinal fluid are commonly tested. Other samples can be tested provided they are of low ionic strength, neutral pH, have low levels of dissolved solids, low solid matter and are free from silver halides and other components which may react with silver.

  • Earth Meter

    EM-4055 - MEGABRAS srl

    The EM-4055 Earth Meter is a digital, microprocessor-controlled instrument that allows to measure the earth resistance and ground resistivity (using Wenner´s method), as well as to detect parasitic voltages present in the ground. This instrument is well suitable to measure earth systems in power substations, industries, distribution networks, etc., according to VDE 0413. It is also suitable for soil resistivity measurements, in order to optimize the earth systems project

  • Eco-Power Meters

    Panasonic Automotive & Industrial Systems Europe GmbH

    Main unit expandable with up to 3 expansion unitsEach unit can measure up to 2 circuits (8 circuits with 3 expansion units)Accuracy: 0.2% for V, I and 0.5% for kWhPower quality measurements (THD and harmonic analysis up to the 31st order)Bidirectional energy measurement (energy produced and energy consumed)Demand measurementWeb server functionality integratedNo hub switch required2 Ethernet ports, 1 RS485 interface1 input, 2 outputsHour meter functionalityDIN rail mountingQuick wiring thanks to push-in terminalsIEC61010-1 CAT III

  • Ferrite Meter

    MF300F+ - DIVERSE Technologies

    The Diverse Ferrite meter MF300F+ measures the Ferrite number (FN) of austenitic and duplex stainless steel weld material. It has a probe that is sensitive to ferrite content in a 10 mm area to a depth of approximately 1 mm. The instrument is calibrated using the secondary world standards held at The Welding Institute. All 16 standards are used in the calibration giving an instrument with a measurement range from 0 to 115 FN.

  • Fiber Meter

    Liverage Corp

    The Fiber Meter is mainly used for checking the signal output power of the optical communication equipment in fiber optic networks. It measures the average power of a continuous light beam which is emitted from the equipment or other optic sources. It measures power in both 850 nm / 1300 nm (Multimode) and 1310 nm / 1490 nm / 1550 nm (Singlemode) respectively.

  • Electrostatic Meter

    ESM-2 - ROM-Elektronik GmbH

    Our new development, ESM-2 electrostatic meter (successor of the tried and tested ESM-1) measures this alternating voltage via a hand-held probe against ground and displays its value digitally and thus easily readable. If the measured voltage exceeds certain values defined in the "Electrobiological standard", it can be reduced to noncritical values by means of targeted, usually simple, measurements.

  • Energy Meter

    PeakTech Prüf- und Messtechnik GmbH

    New designed, high-precison Energy Meter for detecting the energy consumption of electrical appliances and to calculate the total cost of the electricity consumption of a device by entering the current price. Through the integrated power factor calculation all modern electronic consumers such as switching power supplies, TVs, fluorescent lights, LED systems and of course, resistive loads such as electrical heaters and hobs are precisely measured. In addition, due to the high resolution and the low response, even very small or standby loads are measured from approximately 1W.

  • Energy Meters

    Rj-7600 - Laser Probe Inc.

    The Rj-7610 Single Channel Energy Meter works with a variety of probes ? pyroelectric, silicon, and thermopile ? to measure true energy per pulse from single-shot to 40 Hz, picojoules to Joules, UV to far-IR. Sets of 10 or 100 pulses can be statistically analyzed (mean, minimum, and maximum energies, standard deviation), and data can be transferred to computer via the IEEE-488 GPIB computer interface or using the 0-10 VDC analog outout. 

  • Multifunctional Meter

    CPM-70 - Chang Shuan Electronics Co., Ltd.

    CPM-70 multifunction power analyzer provide high accuracy single phase and three-phase energy measuring and displaying, energy accumulating, power quality analysis, data logging and data communication.CPM-70 series meters are able to measure bidirectional, four quadrants kWh and kVarh.It provides maximum/minimum records for power usage and power demand parameters. Hardware standard built in a RS485 Modbus communication port , 4 Digital inputs, 2 Relay outputs, LCM and 2 MB flash for data-logging.

  • Micro-Ohm Meters

    Extech Instruments Corporation

    6 ranges with 3 sub-ranges in each current rangeMeasurement of resistive and inductive materials5-Digit backlit LCD, PC interfaceAuto or Manual ranging, 10A maximum test currentStore/Recall up to 3000 measurementsCable length measurement (feet or meters)Complete with 4-wire cables with Kelvin clip connectors, rechargeable Li-Polymer battery, AC adapter/charger, software and USB cable, and soft carrying case

  • Moisture Meter

    Pest Control - Tramex Ltd.

    Tramex Moisture Meters help Pest Management Professionals determine if existing conditions are conducive to the infestation of termites, carpenter ants and other wood-destroying insects. They are very useful tools for deciding on the optimal placement of aboveground bait stations and can also be a useful monitoring tool during follow-up inspections after a termite treatment. Assessing moisture level changes pre- and post-treatment can be useful in determining whether or not further investigation is warranted.

  • Moisture Meters

    MRC ltd.

    Stainless professional probe, RS232/USB data interfaceDew point, Type K thermometer* Professional Humidity content probe, used to measure the humidity content value for the materials of Grain, Corn, Rice. Cotton, Paper...Weight Meter: 245 g/ 0.54 LB. Probe: 461 g/ 1.01 LB.DimensionMeter: 195 x 68 x 30mm (7.6 x 2.6 x 1.2 inch)Humidity Content Probe: Probe length : 600mm. Probe head diameter: 10mm. Cable length: 1.5metersNo warranty for damage to the probe

  • L20 Meters

    Model L20 pH/ORP - Electro-Chemical Devices

    The Model L20 pH/ORP/Temperature meter is an AC line powered or battery powered precision instrument. The Model L20 features auto buffer recognition during calibration for both USA Standard and NIST pH buffers. The L20 has automatic temperature compensation and it monitors the electrode’s slope and offset reporting the electrodes efficiency assuring that the measurement is correct.