Filter Results By:

Products

Applications

Manufacturers

Meters

sense and display measures of gas, water, electricity, particles, vibration or light.


Showing results 3496 - 3510 of 4380 products found.

  • Optical Multimeter

    FPL300 Series - Shanghai Tarluz Telecom Tech Co., LTD

    FPL300 Series Optical Multimeter integrates a stable optical laser source and a precise optical power meter. The optical laser source unit launches the laser whose wavelengths are at 1310/1550nm. The optical power meter unit can recognize the wavelength automatically. FPL3 Series Optical Multimeter offers a large storage capacity; With the assorted software, user can generate a report or manage the test report easily.

  • 2+1 Channel PC Digital Oscilloscope / Logger

    DS1M12 "Stingray" - USB Instruments

    This new PC instrument supersedes our popular DS2200 budget oscilloscope.  Powered from USB, Stingray needs no external power supply.  Stingray combines the functions of Oscilloscope, Data Logger, Spectrum Analyser, Volt Meter, Frequency Meter and Signal Generator in a single instrument.  Stingray features simultaneous 12-bit sampling on both channels, a native  sampling rate of 1MS/s (20MS/s for repetitive signals), sophisticated hardware triggering including delayed time base and pulse width.  

  • AC/DC Power Clamp Tester

    IBL-307 - International Biological Laboratories

    This Digital Clamp On Power Meter Model 307 can be used to measure True Power, Apparent Power and Power Factor in single phase circuits. It measures AC/DC Current and incorporates a frequency counter. It is autoranging type Digtal Clamp On Power Meter and has 3-3/4 Digits 4000 Counts with 40 segment analog bargraph LCD Display.

  • AC Power Calibrator

    LS3300 - Yokogawa Meters & Instruments Corporation

    The LS3300 is an AC signal generator capable of outputting both current and voltage simultaneously, thus allowing it to calibrate power meters. Providing output ranges of 10mV-1250V, and 0.3 mA to 62.5 A, and upto 78.125 kW, the unit is capable of calibrating up to 0.15 % Class Power meters. New features on the LS3300 include a high definition LCD display, a vector diagram, and the ability to synchronize up to three units to emulate anything from single phase two wire to three phase four wire systems.

  • Transformer Test Panel/ Setup

    AJIT Electronics Co.

    This is a common test panel for distribution/ power transformers of different specifications. The user can perform most of the factory tests, as per the relevant IS standard for the transformers. The panel consists of power analyser, meters for high voltage test, meters for induced voltage test etc, control for all the tests, protection and interlock circuits so that a single panel can be used to conduct a number of tests using only one dimmerstat and the associated devices

  • Whole Body Vibration Dosimeter & Analyser

    SV 101 - SVANTEK Sp. z o.o.

    SV 101 is a digital Human Vibration Meter & Analyser integrated with triaxial Whole-Body accelerometer . This is a complete HVM (Human Vibration Meter) provided with the ultrasound presence detection sensor and user interface (display with push-buttons) indicating current instrument state and measurement results. Instrument meets ISO 8041:2005 standard and it is an ideal choice for the measurements according to the ISO 2631-1, 2 & 5.

  • Test Kit

    LA-3001 - Walter G. LEGGE Co., Inc.

    The Model LA-3001 Test Kit is designed to measure surface resistivity in ohms per square, point to point and resistance to ground in both 10v and 100v. The meter has both a easy to read colored scale and LED indicators. The Model LA-3001 Test Kit comes complete with a aluminium carrying case, meter, 2 x 5 Ib. weight, square probe and test leads.

  • Wzzard Machine Condition Monitoring Application Bundle, Vibration

    WSKIT3BE-CBM-V - B+B SmartWorx

    The bundle provides everything you need: the sensors, the wireless nodes, and the network gateway.Vibration sensors and cables includedLow maintenance, multiyear operation on battery power. (2) AA lithium batteries are included.Wide temperature specifications and a rugged, outdoor-rated, industrial design.Wireless mesh networks provide “five nines” (99.999 percent) uptime.Every node has routing capabilities, providing multiple data paths to the gateway.Up to 32 Wzzard Nodes and 96 individual sensors can be deployed in a single mesh network.Range is up to 100 meters indoors and up to 500 meters outdoors.

  • RELAY TEST SET RNT 5

    Neutronics Manufacturing Co.

    NMC: Relay testing Kit in one unit, is suitable to test different types of Relays like over current, over voltage,under voltage,earth fault etc. The Test Kit will be in one unit. Meters, Terminals ,Indicators, Regulator Knob,Timer Display etc.will be fitted on the horizontal panel of the cabinet which can be approached by opening the top hinged lid. An input chord of 2 meters length with 3 pin plug will be provided. Loading transformer,Measuring CT & protection circuit will also be housed with in the same unit

  • Portable Analyzer

    860 DSPi - Trilithic Inc.

    Portable cable analyzer and CATV meter with a built-in DOCSIS 3.0 modem for performing transmission and signal quality tests for analog and digital HSD and VoIP services. The 860 DSPi is a cable analyzer and CATV meter that performs transmission and signal quality tests for analog and digital HSD and VoIP services. Fast and powerful, Trilithic's popular 860 DSPi offers a versatile solution for your changing business needs.

  • Power Sensors

    Telemakus LLC

    Our power sensors are ideal for use in RF and microwave testing and prototype development. USB power sensors are capable of measuring peak power and average power of a power meter. An added benefit of our power meter sensors is that they are compact and portable. The sensors are powered by your computer’s USB port so setup is fast. To use, simply plug into your computer and your power measurements are determined by a free utility that runs on any XP or Vista PC.

  • Optical Tester

    FOD 1203 - Fiber Optic Devices Ltd.

    The Optical Tester FOD 1203 was specifically designed for technical support personnel to take a variety of measurements with a single meter. The FOD 1203 is an updated version of a popular in the industry Optical Power Meter FOD1202 with a built-in light source at 850, 1310, or 1550 nm wavelength. This device not only measures optical power, but also attenuation and continuity in connecting cables.

  • Clamp Multimeters

    Sperry Instruments

    Clamp Meter is a 5 function, 9 range auto-ranging unit engineered to measure AC Current (40-400A), AC/DC Voltage (400/600V), Resistance (400/4000O), and Continuity. Similar to digital multimeters, clamp meters offer a large range of functions and include LCD screens to display results but they offer the additional unique ability to measure current without having to contact live conductors.

  • Altitude Testing

    Environment Associates

    Our environmental testing facilities simulate altitude testing from -400 ft. (-121 meters) to outer space at 100,000 ft. (30,480 meters) or up to 10-6 Torr (1.3e-7 kPa) with temperature applied as low as -300°F (180C). We can reach these heights within 5 minutes or less. We are capable to handle products measuring up to 4ft X 4ft X 8ft to many standards, including MIL-STD-810 and RTCA DO-160.

  • Saturated & Superheated Steam

    Sierra Instruments, Inc.

    The ideal technology for steam flow measurement, the InnovaMass vortex steam flow meter measures five process variables with one process connection: mass flow, volumetric flow, density, pressure, and temperature. With five high-accuracy results available from a single device, total cost-of-ownership plummets while still providing accurate steam flow meter rates. Lower initial cost, less complex installation, and reduced maintenance costs contributed to significant overall savings to maximize your steam productivity .