Filter Results By:

Products

Applications

Manufacturers

Meters

sense, display, measures; gas, water, electricity, particles, vibration, light or quanta.

See Also: Sensors, Measurement


Showing recent results 3856 - 3870 of 4329 products found.

  • E-Series Average Power Sensor

    E9301H - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range power measurements from -50 dBm to +30 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formatsLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • E-Series Average Power Sensor

    E9300B - Keysight Technologies

    Measure the average power of all modulation formatsWide dynamic range power measurements from -30 dBm to +44 dBmFrequency range 10 MHz to 18 GHzLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters

  • Digital Screen Checker

    Harkness Screens International Ltd

    The low-cost digital cinema luminance meter for accurately measuring screen brightness. Now available, the Digital Screen Checker is an ideal tool for projection managers / projectionists or service engineers to monitor screen brightness and check lamp life. The Digital Screen Checker from Harkness Screens helps exhibitors to ensure that their presentations remain at optimum levels and ensure DCI-compliancy.

  • Digital Signage Extender

    ADDER Technology

    Digital signage is a growth industry, using the flexibility of motion graphics to deliver powerful advertising messages and information tools. The most stable form of signage system relies upon central play out devices delivering video signals via CAT5 or higher cable. The AdderLink AV series of Digital Signage solutions have been specifically designed to deliver bright, accurate video with full saturation and crisp digital audio up to 300 meters from the signal source.

  • Digital Signal Generator

    MCH Instruments Co.,Ltd.

    Digital Signal Generator*signal frequency:0.1Hz~2MHz, continuously variableave from: square, sine*output attenuator: 0dB,, 20dB, 40dB, 60dB*output level: 20Vp-p in open circuit, not less than 10Vp-p with 50Ω load*rising and falling edge of square not more than 35ns,*sine distortion less than 1%, amplitude –frequency characteristic : ±0.5dB within 100KHz, ±1dB above 1MHz*frequency meter: 10Hz~30MHz*power supply : AC 220V(110V optional)

  • Digital Ultrasonic Maintenance System

    VPE-2000 - Superior Signal Company

    The Superior AccuTrak VPE-2000 is the first digitally controlled ultrasonic detector. Like two instruments in one it uses two independent sensors supported by separate electronic circuits configured specifically to their own sensor. This assures optimum sound clarity and frequency response. When switching between the airborne and contact sensors all settings are retained in memory! Digital LED meters let you establish baselines, perform trending, and accurately repeat these tests better than older more expensive analog instruments.

  • C-Mode Tester

    JT-2 - LinAire Engineering, Inc

    No more time-consuming diagnostics using Prints, Continuity Meters, DVMs and wasted manhours. Just plug in the JT-2 and localize the problem – right away – right in the aircraft. When used with a Transponder Ramp Tester, checks Transponder C-Mode Operation, the Installation and, by substitution, the condition of the C-Mode Encoder. This unit make Encoder, Installation, and Transponder checks so simple and fast that it pays for itself with one use. Every technician will want their own JT-2 once they discover its remarkable utility.

  • DIN Rail Multimeters

    EMM - Contrel Elettronica s.r.l. Company

    he digital multifunction meters of the EMM series allow the measure of the main electrical parameters of the electrical energy distribution networks. The local visualisation of more than 30 measured parameters is made with the usage of 4 red LED displays, in order to guarantee a reading clear and simultaneous of different measures. Intuitive selection of measures, that have to be visualised with a LED signal, completes a very simple frontal panel, but also supplies a lot of information.

  • HI-Z® PROBES

    B-1012-B - ROSS ENGINEERING CORPORATION

    Up to 120kV DC, 85kV AC RMS 50/60 Hz or more.10,000 megohms or more HV input resistance.Usable with any digital meter of 10 megohms input.Higher voltage, higher resistance, lower current also available.Available with insulated handle meeting OSHA recommendations.Only draws 12 microamps at 120kV DC, minimizing power supply loading.1000/1 ratio with 10 megohm output load, 10,000/1 ratio with 1 megohm output load.

  • Human Vibration Management Software

    HVManager - Larson Davis, Inc.

    HVManager is a Risk Assessment and Recordkeeping software tool for reporting Vibration measurements and predicting Personal Exposure Levels. It provides reports of vibration measurement data from hand-arm and whole-body measurements acquired from the Larson Davis HVM100 Human Vibration Meter and produces vibration database records by tool type and serial number. HVManager also compiles cumulative predicted vibration exposure levels from any combination of tools and task durations taken from the measurement database.

  • Humidity/Temp + Data Recorder

    MRC ltd.

    CO2 METER + Humidity/Temp + Data recorder* Real time recorder, save the data into the SD memory card and can be down load to the Excel, extra software is no need.* CO2 range : 0 to 6,000 ppm x 1 ppm* Humidity range: 10 to 95 %RH.* Dew point Temp. and Wet bulb Temp. measurement* Datalogger Sampling Time: 2 sec to 8 hour 59 min. 59 sec* RS 232/USB PC computer interface.

  • H.V DC Power Supply

    KT-20KVDCP-20 - Kast Eng Co. LTD.

    This DC Power Supply provides DC 0 ~ 20 ㎸, with max output current to 20 ㎃(max power 400 W). This DC Power Supply fitted with large V.A meters(Class 1.5) for the sake of accuracy, and available to preset the over current limit easily. KAST manufactures many kinds of power max voltage up to 60 kV, max current 40 ㎃ too.

  • HVR-LS Horizontal Vertical Flame Tester

    HVR-LS/HVR-LSS - Lisun Electronics Inc.

    This equipment meets the requirements of ANSI/UL94, IEC60950-1, IEC695-2-2 and GB Standard. It is used to test the appliances and plastic materials parts of electrical equipment for the horizontal, vertical flammability test. The product tank shell is irony spray, and configured a transparent viewing window, the digital meter shows the burning time, afterflame time, afterglow time, this device has beautiful appearance, is easy to use and has reliable performance.

  • IoT Products

    Asiczen Technologies

    LoRaWAN enabled smart water/energy meters for public utility companies as well as housing societies, factories and institutional campuses enable more efficient usage of resources. AMR system implemented using long range LPWAN technology, can provide periodic metering data apart from other useful parameters, that users may be intrested in. End devices can be controlled using downlink commands from central server. This is useful for remote monitoring/control applications using public/private network infrastructure. This leads to reduction of non revenue water and energy theft.

  • LAN Cable Tester

    PK-168 NEXTpro S2 - Pansco, Ltd

    PK-168 is capable of wire mapping by pin & pair up to 300 meters, Provides Telecom, Datacom and cable installers and technicians with NEXTpro S2 includes both pin by pin continuity test and split pairs (wrong twisted pairs) detection for testing Lan cable via one-ended (no remote) testing finds split pairs, opens or shorts.