Showing results: 376 - 390 of 419 items found.
-
ZET 7110-DS -
ZETLAB Company
ZET 7110-DS digital small strain gauge (with integrated strain gauge) is also used for stress-strain state control of concrete structures, it is used within the scope of engineering structures monitoring systems (both stationary and mobile). Digital small strain gauge is used for stress-strain state control and alarm notification in the case of elastic range of stress value exceeding. ZET 7110-DS digital small strain gauge is supplied in air-tight shock-proof package with dust and moisture protection.
-
DairyScan -
FOSS A/S
The DairyScan allows for fast and accurate fat and moisture testing within your cheese production. Forget about slow, labour-intensive traditional testing methods and enjoy rapid analysis whenever you need it. Instant information helps you to spot out-of-spec products so that you can improve quality, avoid costly mistakes in production and ensure higher profitability. With a testing time of 45 seconds the DairyScan is ideal for smaller dairies producing less than 7000 tons cheese per year.
-
GAO Tek Inc.
Hygrometers are the devices that are useful in detecting moisture content of the atmosphere. These are important tools that allows users to make sure that the atmosphere of certain places does not have high or very low humidity. Both high and low humidity has adverse effect on human health. High humidity at certain places allows moulds to grow and damage the place while low humidity can cause wooden furniture to be wrapped and even ruined. Moulds can trigger different health problems, including allergic reactions and respiratory disorder.
-
Teledyne Analytical Instruments
Gas Analyzers by Teledyne Analytical instruments - carbon dioxide systems, gas chromatographs, hydrocarbon analyzers, infrared analyzers, moisture analyzers, nitrogen analyzers, nitrogen oxides & ammonia analyzers, oxygen analyzers, sulfur analyzers, thermal conductivity analyzers, tunable diode laser (TDL) analyzers, ultraviolet analyzers, and more
-
Finna Sensors
OMNIR is the future of near infrared moisture sensing technology. Coming from OMNI, meaning “all” and NIR, meaning “near infrared,” Finna Sensors has created an intelligent all-sensing solution that exceeds expectations. It not only delivers accurate data instantaneously and non-destructively, it also monitors its own health to perform its best during your crucial processing moments. By selectively harnessing light, to ensure increased uptime and greater profitability for your operation, the future of your manufacturing operation starts now.
-
Rotronic Measurement Solutions
ROTRONIC Low dew point measurement simply explained. Low dew point probe. Reliable measurement of trace moisture. One probe for portable, fixed or OEM applications. Ideal for compressed air with dew point as low as -60°C; desiccant or refrigeration dryers.The low dew point probe comes with the latest AirChip4000 technology. Calculates a measurement from the average of 8,000 single points within a 2 second interval and, together with the HYGROMER® LDP-1 dew point sensor, delivers measurements of the highest quality.
-
Reltech Limited
The selection of the test socket is critical to the performance of a device during qualification testing where electrical bias and signals are applied. Key factors such as mechanical compatibility, operating temperature, ability to withstand high moisture levels, signal speed and lead inductance/capacitance all need to be taken into account when selecting the best socket for the test application.
-
Lyncis
Online Coal Analyzer is installed over the conveyor belt and provides continuous real-time data of coal parameters, such as calorific value, total ash, moisture and others without sampling. The solution is widely used in coal power plants, coal mines and coal terminals to maximize the use of coal resources or control the quality of produced material.
-
Megger Group Ltd.
The primary test methods used to assess the condition of the active insulation components in transformers and bushings, on site, include:1) power factor/tan δ,2) variable frequency power factor/tan δ (1 - 500 Hz)3) dielectric frequency response (DFR) [a dielectric response method], and4) moisture in oil measurements (for transformers).
-
ML675 -
Teledyne Monitor Labs
The Teledyne ML®675 dilution-extractive system can be used in 40CFR75, 40CFR60, 40CFR63, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet basis.
-
MG-II -
Chongqing Kailian Yongrun Industrial Co.,Ltd.
The dielectric breakdown voltage test (BDV test) is an important test to determine the breakdown voltage of insulating oils. After a certain period, transformer oil will be degraded, and there are moisture, gas and impurity in oil. Then, the quality of transformer oil is affected. So it is necessary to test the transformer oil. BDV test is one of the most common tests to insulating oils.
-
National Technical Systems
Temperature and humidity testing determines how components, subsystems and complete systems behave in severe environments that involve elevated temperatures and high or fluctuating relative humidity. The tests can be static with constant temperature and humidity, they can involve the cycling of both, they can be temperature-humidity bias tests (where the moisture is used to induce a failure in an electrical device) or some combination of all of these.
-
Apogee Instruments, Inc.
The fan has an ingress protection (IP) rating of 55, virtually eliminating moisture and dust ingress. At full speed the power requirement is 1 W (80 mA at 12 V DC). To conserve power fan speed can be reduced, via pulse width modulation (PWM), to 0.3 W at night or when wind speed is greater than 3 m s-1 without loss of accuracy. If the fan is continuously operated at full speed lifetime is rated at 50,000 hours (5.7 years). The fan includes a tachometer, allowing RPM to be mounted to detect obstruction of the fan.
-
MEXA-1300R -
HORIBA, Ltd.
MEXA-1300R is a motor exhaust gas analyzing system for two and four stroke engine assembly lines and has an integrated sample handling system for removal of oil and moisture. The measurement of CO, CO2, HC and O2 (optional) in exhaust gases is made simply by inserting the sample probe into the tail pipe. AFR and Lambda are also calculated from the exhaust gas concentrations.
-
LBA Group, Inc
LBA Technology "Blue Line" RF inductors are based on over 30 years of proven international performance. Blue Line inductors are unsurpassed for hi-Q, stability, and low RF losses. These inductors are manufactured from heavy silver plated copper conductors and brass fittings, treated to resist tarnishing. Windings are insulated with melamine or G-1 0 epoxy laminates. These materials are recognized for their exceptional RF qualities, arc resistance, mechanical strength, and low moisture absorption. Supporting frames are engineered to permit maximum access to windings for convenience in adjustment. The metallic frames are separated by insulators to prevent induced current flow.