Filter Results By:

Products

Applications

Manufacturers

Showing results: 2266 - 2280 of 2817 items found.

  • S-parameter Measurement System

    DPS21 - KEYCOM Corp

    Unlike a coaxial tube type or a wave guide tube type, this method does not make errors caused by air-gap as specimens are not put into a fixture. Practical data can be obtained even at the rough, uneven surfaces where the specimen is placed on.It enables compactness and measuring specimens by plane wave because of direct installment of lens with an antenna.It enables measurement by monitoring S21 and S11 parameter with connections of a test fixture to a vector network analyzer and PC.

  • Relays, Switches, Sensors

    CR MAGNETICS, INC.

    CR Magnetics Sensing Relays and Switches provide a simple method of monitoring electrical properties and alerting a system to a fault or event condition. These products are available with a wide variety of configurations, including time delays, various output styles and logic. From simple proving switches, to fully featured high performance ground fault sensing. Our relays and switches will provide the designer with the tools needed to implement many different control and event sensing schemes.

  • Power System Analyzer

    931A - Arbiter Systems, Inc.

    Model 931A, with state-of-the-art PowerDSA™ Digital Signal Analysis, make more measurements, more accurately, and at a lower price than ever before. Basic accuracy of 0.05 % of reading and 0.05 ° phase, harmonic analysis, and full three-phase capability are standard. Model 931A also incorporate full two way serial communication for use in power quality trend monitoring. The model expands usability by including transducer calibration and timer features.

  • PXI 8x SPST High Voltage Reed Relays

    40-310-001 - Pickering Interfaces Ltd.

    The 40-310/320 range of high voltage switching modules will hot switch up to 750V peak and cold switch up to 1000V peak in either general purpose relay (40-310) or multiplexer (40-320) configurations. These modules contain high-quality reed relays with switching ratings comfortably higher than the 40-310/320 specification. Applications include; circuit board isolation testing, relay testing, semiconductor breakdown monitoring and cable harness insulation testing.

  • Metrology

    KLA-Tencor Corp

    KLA’s metrology systems address a range of chip and substrate manufacturing applications, including verification of design manufacturability, new process characterization and high volume manufacturing process monitoring. By providing precise measurement of pattern dimensions, film thicknesses, layer-to-layer alignment, pattern placement, surface topography and electro-optical properties, our comprehensive set of metrology systems allows chip manufacturers to maintain tight control of their processes for improved device performance and yield.

  • EMF/ELF Meter

    Extech EMF510 - Extech Instruments Corporation

    The Extech EMF510 measures energy from electromagnetic fields (EMF) and electrical signals and is sensitive to extremely low frequency levels (ELF). The built-in single-axis sensor is ideal for monitoring power lines, electrical appliances, fans and blowers, and electrical circuits in two ranges with milli-Gauss and micro-Tesla units. The EMF510 features a large backlit LCD for viewing in dimly lit areas, an ergonomic compact design with wrist strap, auto power off, and Min/Max function.

  • High-Voltage Power Amplifier

    Model 40/15 - TREK, INC.

    The Model 40/15 is a DC-stable, high-voltage power amplifier featuring an all solid-state design for high slewrate, wide bandwidth, and low-noise operation. It is configured as noninverting with a fixed gain of 4000 V/V and is protected against overvoltage and overcurrent conditions that may be generated by active loads or by output short circuits to ground. Precision voltage and current monitors provide low-voltage representations of the high-voltage output and load current for monitoring purposes or for use as feedback signals in a closed-loop system.

  • 512-Crosspoint, 1-Wire PXI Matrix Switch Module

    PXIe-2531 / 780587-31 - NI

    512-Crosspoint, 1-Wire PXI Matrix Switch Module—The PXIe‑2531 is a high-density PXI matrix switch module built to serve high‑channel‑count automated test systems. Featuring compact reed relays with switching speeds up to 2,000 cycles/s, the PXIe‑2531 is designed for low‐current, high‐speed switching. It also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.

  • Stationary Battery Comprehensive Tester

    SAT-AG Series - Shaanxi Aitelong Technology Co., Ltd

    SAT-AG Series Stationary Battery Comprehensive Tester is a kind of product introduced according to the market demand, which integrates the two major functions: on-line monitoring and capacity check test, with higher integration and better functions.SAT-AG is specifically designed for the maintenance of the lead-acid battery discharge in the electricity and telecommunication sector. It is a new high-tech intelligent product that provides safe, reliable and convenient constant testing equipment for the DC system(Direct current system) users.

  • PXI-2531, 512-Crosspoint, 1-Wire PXI Matrix Switch Module

    778572-31 - NI

    512-Crosspoint, 1-Wire PXI Matrix Switch Module—The PXI‑2531 is a high-density PXI matrix switch module built to serve high‑channel‑count automated test systems. Featuring compact reed relays with switching speeds up to 2,000 cycles/s, the PXI‑2531 is designed for low‐current, high‐speed switching. It also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.

  • PXI-2533 , 256-Crosspoint, 1-Wire PXI Matrix Switch Module

    778572-33 - NI

    256-Crosspoint, 1-Wire PXI Matrix Switch Module—The PXI‑2533 is a high-density 4x64 PXI matrix switch module built to serve high‑channel‑count automated test systems. Featuring solid-state relays (SSRs), the PXI‑2533 offers unlimited mechanical lifetime and the ability to route 55 W simultaneously on all channels. It also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.

  • PXI-2534, 256-Crosspoint, 1-Wire PXI Matrix Switch Module

    778572-34 - NI

    256-Crosspoint, 1-Wire PXI Matrix Switch Module—The PXI‑2534 is a high-density 8x32 PXI matrix switch module built to serve high‑channel‑count automated test systems. Featuring solid-state relays (SSRs), the PXI‑2534 offers unlimited mechanical lifetime and the ability to route 55 W simultaneously on all channels. It also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.

  • PXI-2529, 128-Crosspoint, 2-Wire PXI Matrix Switch Module

    778739-01 - NI

    The PXI‑2529 is a high‐density PXI matrix switch module that you can configure as either a 4x32 or 8x16 2‑wire matrix by using different terminal block accessories. It uses electromechanical relays that offer excellent performance for high-power signals and low thermal offset for accurate measurements at low-voltage levels. The PXI‑2529 also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.

  • PXI-2585, 10‐Channel, 12 A, 1-Wire PXI Multiplexer Switch Module

    778572-85 - NI

    10‐Channel, 12 A, 1-Wire PXI Multiplexer Switch Module —The PXI‑2585 is a high‐power PXI multiplexer switch module that is ideal for switching power signals and loads in control applications and battery, power supply, and automotive testing. It is configured as a 10x1 multiplexer with both low contact resistance and high isolation voltage. It also features onboard relay counting for relay monitoring and deterministic operation with hardware triggers to improve test throughput.

  • All-Inert Autosampling Dissolution Tester with Built-In Fraction Collector

    CD AutoPlus & CD AutoFill - Teledyne LABS

    The CD AutoPlus™ is a precision autosampling system with all-inert syringes, valves, tubing, and fluidics, designed for plug-and-play integration with CD14 Comparative Dissolution Testers. With 6 syringes (10 mL capacity) and a volume accuracy of ± 1% (0.1 mL), the CD AutoPlus easily accommodates sampling intervals under 5 minutes.​The CD AutoPlus comes in two configurations, DissoScan™ and Maximizer™. Use the DissoScan with optional return-to-vessel (RTV) probes to recirculate rinse volumes, or the Maximizer™ for automated addition of dilutions or stabilizers, and its included media-replacement kit with low-evaporation vessel covers, 6 fixed probes (PEEK), and a 6-channel tubing harness.​The AutoFill™ collector is a precision fraction collector built to seamlessly integrate with the AutoPlus™ to save space and to provide a 360 degree view for visual monitoring of the collection process.The CD AutoPlus (38 cm W x 66 cm D) when combined with the CD14 dissolution tester provides the smallest 14-vessel footprint in its class.

Get Help