Filter Results By:





Continually examine for quality.

Showing recent results 436 - 440 of 440 products found.

  • AutoScanner Live Data

    CP9670 - Actron

    *Compatible with ALL 1996 and newer import , domestic, diesel and hybrid vehicles (OBD II & CAN), as well as 1994 and 1995 OBD II compliant vehicles*Over 15,000 generic and manufacturer specific DTC (Diagnostic Trouble Code) definitions*LIVE real-time data, over 300 possible data PIDs available (depending on vehicle)*Record / Playback of live data**Graph Live data*ABS codes and definitions for most 1996-2013 GM, Ford, Chrysler, Toyota, Honda, Nissan, and Hyundai vehicles*Full manufacturer specific code definitions-make/model/yr on the tool*AutoID™ vehicle – Automatically identifies most 2000 and newer vehicles*Enhanced Engine and Transmission Codes*Read and erase DTCs*Reset MIL and turn off Check Engine light*Read and display MIL status*Tool gives visual indication when the trying to communicate and retrieve data from an OBD II vehicle*Read and display all available I/M Monitors (emissions)*Read and display pending DTCs*Read and display freeze frame data (snapshot of vehicle data at the time of the fault)*Read and display VIN, CVN and Cal ID*Battery / Alternator / Charging System Monitor*Mode 6 in Layman's terminology *Display State OBD check*Display OBD II Drive Cycle Mode*Trilingual menu and code definitions (English, Spanish, French)*Component Locator – Text based description of where to find a component on the vehicle*Acronym Library*Full PID Name Description in live data*System setup menu includes language setup, unit of measure, display test, keypad test, memory test, tool information and program mode

  • Ozone Monitor

    Mast Development

    The Mast Development Model 727-3 provides electronic circuitry which automatically monitors and controls UV source drift and corrects instrument span over each sample - reference measurement cycle. The data conditioning system stores the measured data, performs the subtraction and decodes the data for display. Data is held on the display until new data is ready. Data obtained during the reference measurement is stored until the sample measurement data is available. At this time, every 20 seconds, the sample data is subtracted from the reference data and the difference is entered into the display as parts-per-million (ppm) ozone. The sophisticated reference system compensates for variations in the optical components, interfering molecules and UV source noise. No manual adjustments are required. Operation is completely automatic. Span is continually adjusted during each reference cycle. Display and analog data are held at last measurement level until updated on the next cycle. The instrument is ideal for applications requiring long term unattended operation in ozone measurement.

  • Voice Monitoring

    VOIP Echo - GL Communications Inc.

    *The Voice Band Analyzer (VBA) is an analysis tool for monitoring the quality of voice band traffic (including hybrid echo) over VoIP, TDM and wireless networks*VBA works in conjunction with GL's TDM, Packet, and Wireless non-intrusive capture products, such as T1 and E1 Call Capture and Analysis, VoIP PacketScan&trade, and GSM, CDMA, and 3G Call Capture Products. VBA instantly detects voice file captures and with appropriately installed analysis modules, monitors speech levels, noise levels, and hybrid echo. Other analysis modules such as ITU-T P.561, P.562, P.563, fax and modem analysis, and many others can be hosted as plug-ins.*The VBA application can also operate on pre-captured files. It supports A-Law, µ-Law, 16-bit PCM (Intel), 16-bit PCM (Motorola) and MS Wave file formats.*Required software PKV100 and VBA032 at each probe location and PKV170 PacketScanWEB - Network Surveillance Software*Required hardware - 1U rack PC with sufficient hard disk for capturing over 10,000 calls (80 GB HD) for each VBA colocated with a probe*Additional hardware - PC for PKV100 PacketScan™ Software

  • Fanless Embedded System With 7th/6th Gen Intel® Core™, Pentium® And Celeron® Processor For Railway And Vehicle PC

    UST500-517-FL - Axiomtek Co., Ltd.

    The UST500-517-FL is powered by the LGA1151 socket 7th/6th generation Intel® Core™ and Pentium® processors up to 65W with the Intel® Q170 chipset. The integrated 16 PoE ports are available in RJ-45 or M12 connectors for IP cameras. It provides a full scope of power protection that includes intelligent vehicle power management technology for ACC on/off delay, shutdown delay, and over/under voltage protection. Enhanced by its robust structure and system design, the UST500-517-FL is able to operate under a wide temperature range from -40°C to +70°C and vibration endurance up to 3 Grms. This transportation embedded box is in compliance with ISO 7637-2 and EN 50155 for mobile surveillance applications. There are 16 Gigabit LAN ports which support 802.3at/af Power over Ethernet with a total power budget of 200W. Its DVI-D, HDMI and VGA interfaces support three surveillance monitors. Furthermore, its external accessible SIM card slot enables users to easily change SIM card for different telecommunication service. With wireless LAN modules, this user-friendly transportation embedded system can real-time transmits the video to the control center. The two built-in or four swappable SATA hard drives are used for mass storage of video files.

  • RapidIO Network Management, Diagnostic and Middleware Tools

    RapidFET™ - Fabric Embedded Tools Corp.

    RapidFET is a product line of RapidIO Network Management, Diagnostic tools and Middleware. They are used by semiconductors for device verification and interoperability testing (See Board level vendors and OEM''s use RapidFET for hardware bring up, software prototyping, software development, board testing and system integration. Almost all of our customers use RapidFET for supporting their RapidIO customers. Here is a brief overview of the 4 products in the RapidFET family: RapidFET Professional - Professional is the software that forms the foundation of the Network Management tool set. It allows you to perform a variety of operations on your RapidIO network or upload and monitor your RapidIO network passively. This includes things such as Enumeration, Discovery, Initialization of routing tables/registers/etc, Performance monitoring, Error monitoring, Data Generation, Congestion monitoring, Report Generation and much more. Professional consists of a client that runs on a PC, and a server that runs on any RapidIO endpoint including in system processors and FPGAs. RapidFET Probe - is a hardware module that acts as a dedicated server for Professional and contains a DSP and RapidIO Switch that is used to quickly connect to any system - either directly through CX4 cable or via a variety of adapters. It can also be used to inject specific packets for testing including error packets. The Probe is designed to work seamlessly in conjunction with Professional eliminating the need to port a server to an existing system processor endpoint RapidFET JTAG - The JTAG tool comes in both a Standard and Enhanced edition. While Professional is a system based tool, JTAG is a single switch debug tool where discovery beyond the switch is not possible. The standard edition provides basic register access via the JTAG port including EEPROM programming, Scripting and other basic capabilities. The Enhanced edition includes a custom Quad/Lane/SERDES configuration capability, Performance monitors, Automated DFE Scan for optimizing each communication channel, and a Packet Generator - for the new IDT 2.1 switches. RapidFET Middleware - is a library of ANSI C source code intended to be used within an OEM''''''''''''''''''''''''''''''''s embedded software to perform many of the higher level functions that are performed in our RapidFET Professional software such as discovery, enumeration and initialization. It is designed to leverage our HAL (Hardware Abstraction Layer) that includes many years of knowledge of how commercial devices interoperate - or not - and fixes to address short falls or unique behaviours. Middleware is designed to work hand in hand with Professional. For example you can configure and optimize a system using Professional and then export the entire system configuration (routing tables, registers, enumeration, etc) and use it directly within Middleware in minutes.