Showing results: 376 - 390 of 492 items found.
-
MaxiDiag MD808 -
Autel
The all new MaxiDiag MD808 is built to take your diagnostic experience to a whole new level. Loaded with oil service reset, battery registration and reset, parking brake pad relearn after replacement, steering angle sensor relearn and diesel particulate filter regeneration functions, MD808 can access Engine, Transmission, ABS, and Airbag (SRS) systems for the best diagnosis operations. With all that enclosed in a 4-inch hand-held device, there is no better multifunctional scan tool on the market.
-
P845 -
Whitman Controls
The Whitman Controls P845 Differential Pressure Switches are rugged and versatile, with excellent by-pass characteristics and the ability to handle a wide variety of media to 6,000 PSIG and set point ranges to 250 PSID. These switches are NEMA 4 rated and can tolerate submersion. They are commonly used across oil and water filter heads to detect when a filter element needs changing. It may be mounted in any orientation and is capable of carrying light to moderate mechanical shock and vibratory loads.
-
Corvalent Corporation
The CorSys Flex are built-to-spec systems based on Corvalent motherboards. These systems can be fully customized from the motherboard up to the I/O connectors. Typically used for the oil & gas, medical, industrial automation, and military industries.CorSys Flex Systems are available in 1U, 2U, 3U and 4U:-CorSys Flex 10th/9th Gen 18” 1U Rackmount Workstation-CorSys Flex 10th/9th Gen 17.7” 2U Rackmount Workstation-CorSys Flex 10th /9th Gen 18” 4U Rackmount Workstation
-
Teledyne Defense Electronics
Teledyne Relays offers high-performance relays designed to survive the rugged conditions required for oil & gas exploration, industrial control, and military & space applications. Teledyne Coax provides RF & Microwave switching solutions for SATCOM, military & space applications, test & measurement equipment, and ATE systems.
-
Teledyne Marine Impulse
The standard NET Series design uses rugged stainless steel connector bodies with a naval bronze engaging nut. The use of metal key and Acme threads on the mating interface allows for easy mating and un-mating of the connectors, no matter where they are located. In addition to the contact spacing, which is optimized for this application, one of the keys to achieving the 1 Gbit/s transmission rates is in the unique terminations for both the cable and bulkhead connectors. These cable terminations can be performed at a number of the Teledyne Oil & Gas worldwide manufacturing and support locations.
-
SDT -
KRÜSS GmbH
Our Spinning Drop Tensiometer – SDT measures interfacial tension with a high degree of accuracy and a particularly wide measuring range. The SDT is the ideal solution for the quality control and development of emulsions and surfactants thanks to its enormous bandwidth, small sample volumes and simple handling during preparation. Exact capture of extremely low interfacial tensions also makes the SDT an instrument particularly well-suited for analyzing the interfacial behavior of mini emulsions and micro emulsions, for example for tertiary oil recovery or the pharmaceutical branch.
-
NevadaNanotech Systems, Inc.
NevadaNano’s MPS™ Methane Gas Sensor quickly and accurately conducts methane gas leak detection in the most challenging environments – from Arctic wellheads to shale fields in South Texas. Immediate alerts and prioritization are made possible because real-time sensor arrays powered by the MPS Methane Gas Sensor continuously feed cloud-based monitors. 24/7 point detection is the ideal solution to achieve fast mitigation of fugitive methane emissions across the entire oil and gas supply chain.
-
Typhoon Inferno -
Qualmark Corporation
Qualmark's Inferno is a HALT system specifically configured for testing the durability of instrumentation, tools and electronics that will face harsh environments - such as oil and gas exploration. The Inferno can deliver a combination of +250C to -100C temperatures, over 60 gRMS , multi-axis, with 6 degrees of freedom vibration in a matter of minutes. Exposing products to such extremes rapidly reveals design and manufacturing flaws missed by traditional reliability testing methods dramatically reducing the time line for new product introduction and substantially extending product design margins.
-
Flameguard P5-200 -
Teledyne Marine ODI
The FlameGuard™ P5-200 is a key enabling technology for a 5 kV - 200 A, three-phase dry mate electrical feedthrough system. Designed for offshore topside oil and gas platforms, where explosive and flammable conditions are likely, the feedthrough system is used to provide an electrical connection to downhole pumping systems. The feedthrough system is designed for dry tree operators and ESP pump manufacturers who want to reduce operating expenses over the life of the field, while improving system reliability and reducing safety risks.
-
MSP Corporation
All filter test equipment from TSI, used for testing efficiencies of filter media and a variety of air filters, including high and very high-efficiency filters, respiratory filters, cartridges, and protective garments, is known for its simple and reliable operation. All of our filter testers can determine the efficiency of filters using submicron poly- and monodisperse oil and/or sodium chloride aerosol. Additionally, TSI's filter test solutions are used to comply with various testing standards and regulations around the globe.
-
DD series -
Ono Sokki
The DD series torque detector is the high-end equipment of the SS series to use in high speed measurement and large capacity measurement. It can be recommended to use in the heavy-duty application from DD-505 to DD-108. Double bearings provides three to five times the strength of our conventional torque detector under radial and thrust load, which enables direct coupling to automobile engines and saves the space as it makes a conventional intermediate bearing unnecessary. The oil drip lubricant (option) is necessary for the DD series.
-
doblePRIME -
Doble Engineering
The doblePRIME Condition Monitoring Platform for Transformers gives you a clear, consolidated means to assess overall transformer condition.Now you can pick the appropriate level of condition monitoring for an individual transformer or group of transformers in one location.doblePRIME is a scalable, on-line monitoring solution that can be as simple as one diagnostic device or a robust system monitoring and analyzing oil status, tap changer condition, bushing health, while integrating all types of diagnostic indicators, IEDs and sensor data. View this critical information on site or remotely.
-
Positek Limited
Available with any measurement angle between 15 and 160 the P603 tilt sensor operates a gravity driven, oil damped pendulum with a very low settle time and durable housing. Our tilt sensor has proved popular in marine applications because like our linear and rotary sensors we have used highly durable and corrosion resistant materials.We also offer the S623 which is waterproof sealed for continual submersion to IP68 350bar, 5000psi, 3500msw
-
tecsis LP
As part of our Oil & Gas Series, tecsis LP now offers the Model LPI inclination sensor to measure inclination in the X, Y, or both X and Y directions (2-dimensional), used to measure the tilt angle of objects with respect to the horizontal. This unique sensor is useful as a safety component for measuring boom angle on construction cranes, platforms, and lifts. It also provides accurate data for leveling agricultural and commercial vehicles, monitoring drilling angles and derricks, or recording pitch and roll of ships.
-
K653 -
Chongqing Kailian Yongrun Industrial Co.,Ltd.
It is designed to test the trace water content of liquids, gases and solids by Karl Fischer Coulometric analysis method. It is widely used in fields of petroleum, chemical, food, electrical power, pharmaceutical, paint and environmental protection etc. It can maintain and protect your equipment, while eliminating damage caused by water in oil.
