Showing results: 5986 - 6000 of 11090 items found.
-
SDP-30KW -
Zhejiang Sandi Electric Co., Ltd
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it’s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won’t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply.
-
Eltel Industries
*Aesthetically designed Single Unit consisting of Measuring Bridge, Power Supply with in-built Standard Capacitor. Ideal for field /portable applications.*Highly compact & Portable – Approx 66Kgs only.*Advanced Protection Circuitry –specially suitable for 400kV s/s applications.*Successfully passed all required EMI/EMC Tests at SAMEER Chennai IEC 61000-4-2;IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-11;*Improved Plug-in type of “Power In” and “Gnd” connectors.*Preo 2 Stage RF Power line Filters incorporated for 230V Power Input and Bridge Power Input for improved EMI Power line Protection*Improved 2 sets of LV measuring cables.*Improved HV cable outer covering hosepipe for rugged field use.
-
CPM-10 -
Chuan Sheng Electronics Co., Ltd.
CPM-10 Multifunction Power meter measure single phase 2 wire ,single phase 3 wire, three phase 3 Wire and 3 Phase 4 wire systems with high accuracy measurement for parameters such as voltage, current ,active power, reactive power, apparent power, power factor ,frequency, effective energy (V,A,W,Watt-Hr,Var,Var-Hr,VA,PF,Hz), having LED display and standard communication RTU Modbus RS485..Optional functions 1 set relay output,1 analogue,1 RS485 (ModbusRTU Mode) or 1 pulse output. Most suitable for power management,remote input /output, alarm and remote signal control uses needs.Case depth 120mm only, easy panel mounting installation
-
ICP -
Memmert GmbH + Co.KG
Our ICP compressor-cooled incubator offers great results whenever a rapid and precise changeover between heating and cooling phases in ramp operation is required. Due to the finely tuned control technology, temperatures exactly reach the setpoint values without the need for energy-intensive bursts of power.
-
Fibotec Fiberoptics GmbH
With the dB-meter the stability or fluctuation of the optical power over a large dynamic range is determined. A fiber-coupled, power-stabilized 1.55μm laser diode is built into the device to easily and quickly test passive fiber optic components or local fiber loops. Alternatively, however, the wavelength range is 780nm-1650nm can be used.
-
HP2540-9TB1G -
ELMA Electronic, Inc.
DC/DC converter with 192 W from Bel Power Solutions | input ranges 16.8 - 137.5 VDC | two outputs at 15 V | operates in temperatures from -40 to +71 °C | provides 10 ms hold up time | 20 mm heatsink included
-
TW-82P -
Aegis Pty. Ltd.
Digital Line Tracer now with Passive Power Detection setting a NEW standard in High Frequency Line Tracing. The TW-82P Digital Line Tracer inlcudes a rugged contruction and compliant with IP65 standard. The casing is impact resistant and weatherproof ensuring you're ready for any conditions.
-
TW82P -
Aegis Pty. Ltd.
Digital Line Tracer now with Passive Power Detection setting a NEW standard in High Frequency Line Tracing. The TW-82P Digital Line Tracer inlcudes a rugged contruction and compliant with IP65 standard. The casing is impact resistant and weatherproof ensuring you're ready for any conditions.
-
The Rotation Link SAS
Electrical Swivels enable the rotation of data and/or power cables and are designed to be integrated into the swivel stacks of Floating Production Storage and Offloading (FPSO) applications. They can withstand the typically harsh environments of the oil and gas (O&G) industry and are installed on vessels and/or floating moored platforms.
-
045-097 -
ELMA Electronic, Inc.
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board.
-
046-712 -
ELMA Electronic, Inc.
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board.
-
056-921 -
ELMA Electronic, Inc.
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board.
-
056-169 -
ELMA Electronic, Inc.
The 6U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board.
-
056-301 -
ELMA Electronic, Inc.
The 6U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board.
-
056-377 -
ELMA Electronic, Inc.
The 3U load boards are designed to simulate the power consumption of a single board computer and other boards on the backplane. With two coding switches on the front panel it is possible to set a constant current or load profile for +5V and +3,3V. For +12V and -12V the current will be set with two jumpers on the board.