Filter Results By:

Products

Applications

Manufacturers

Power

a measure of watts in electricity and radiant energy in optics.

See Also: Power Quality


Showing results: 7246 - 7260 of 11191 items found.

  • Digital I/O Board

    3512 - Abaco Systems Inc

    The 3512 is an eight channel non-isolated digital I/O board with +5V tolerant 74LCX14 inputs with hysteresis and +3.3V CMOS 74LVTH125 driven outputs. Each I/O line features a series 10 ohm damping and protection resistor and a 4.7K pull up resistor to +3.3V. On power up the outputs are tri-stated, and can then be enabled on a bit by bit basis. Output high drive is 32mA @ 2.0V minimum. Output low drive is 32mA @ 0.8V maximum.

  • Digital Lux Meters

    Model KM LUX 99 - Kusam Electrical Industries Limited

    • Precise & easy readout.• High accuracy in measuring.• LSI - circuit use provides high reliability & durability.• Permits a wide range of light measurements.• Low Battery Indication.• Auto zero adjust.• Compact, light-weight, & excellent operation.• LCD display can clearly read out even in High Ambient Light• LCD display provides low power consumption.• Separate LIGHT SENSOR allows user take measurements at an optimum position.

  • Digital Multimeter, USB Interface, 20000 Count, True RMS, Auto Range, 4.5 Digit

    72-7730A - Tenma

    Digital multimeter is a 20,000 counts and 4-1/2 digits with steady operation. The meter can measure AC voltage and current, DC voltage and current, resistance, capacitance, temperature frequency, diodes, continuity, 4 to 20mA loop, Max/Min, relative mode but also has data store, data recall, AC true RMS, AC+DC, low battery display, double display backlight, automatic power off and full overload protection.

  • Dual Trace Oscilloscope

    KM-20-10 / KM-20-20 - Kusam Electrical Industries Limited

    • Dual channels / dual traces, X-Y mode• 6” display, high brightness oscilloscope tube• High sensitivity triggering, upto 1mV / division clearer displaythan ordinary oscilloscope.• TV synchronous separation circuit to observe stable TV signal.• Triggering mode : AUTO / NORM / AV-V / AV-H• Vertical : ALT / CHOP / ADDX-x10 / Y-x5; Polarity reversal; CH1 Sync output• Power Supply : AC 220V ADN (110V optional)

  • EDFA Amplifier

    Optilab, LLC.

    A line of Gain Flattening Erbium-Doped Fiber Amplifiers are designed for in-line amplification of DWDM networks. When a standard EDFA is used to amplify multi-channel DWDM signals, the output power level of various channels will vary according to the gain profile of the erbium fiber. This gain variation can be as great as 6 dB in magnitude. The EDFA-GB-R is unique in its dual-stage amplification and internal Gain Flattening Filter (GFF) to compensate the erbium fiber gain variation.

  • ED-XRF Spectrometer

    SPECTROSCOUT - SPECTRO Analytical Instruments GmbH

    The new portable SPECTROSCOUT ED-XRF analyzers deliver much of the analytical power of top-grade laboratory benchtop analyzers. They provide fast, dependable, truly lab-quality results in the field or on the production floor all at a surprisingly low cost. The SPECTROSCOUT analyzers provide exceptional performance, at wide concentration levels, for all of the relevant elements in the range of Na-U. SPECTROSCOUT impresses with unprecedented precision and speed making it the ideal portable XRF for onsite applications where results matter.

  • Encoders

    CTS Valpey Corp.

    CTS offers a variety of encoder options for the requirements of your applications. We offer incremental and absolute rotary encoders for applications that require high reliability and precise digital output. CTS encoders provide flexibility in design applications by providing versatility in resolution, power consumption, operating temperatures, and use in multiple environments. Multiple shaft and bushing options provide adaptability for your design requirements. These encoders are ideal for navigation and menu selection on digital displays.

  • Generators

    GE Power

    GE is bringing generator technology and performance to the next level. We engineer and build our generators to meet the demanding specifications that keep you on the leading edge of efficient, reliable output. Our equipment installs quickly, integrates easily, operates reliably and delivers more power. With over 12,000 generators shipped since 1901, GE understands your challenges, and offers a complete range of configurations and cooling technologies to meet industry needs.

  • High-Power CW Amplifiers

    Mercury Systems, Inc.

    Our family of solid-state power amplifiers (SSPAs) utilizes proprietary technology and a proven building block approach that enables rapid customization to specific requirements. The world-class design team understands the tradeoffs between GaAs versus GaN and FET versus MMIC to quickly achieve the right design for the right problem. Whether you need a connectorized compact GaN SSPA or an integrated SSPA assembly, we have the technical know-how to deliver on-time and on-budget.

  • Hygro Thermometer

    KM 918 A - Kusam Electrical Industries Limited

    * Temperature range : -10 ~ 60oC / (14 ~ 140oF)* Temperature accuracy : ± 1o C / (± 1.8oF)* Temperature resolution: 0.1 oC /oF* Humidity range: 20% RH ~ 95 % RH* Humidity resolution: 1 % RH* Humidity Accuracy: 8 % RH* Clock, temperature and humidity display * Room and outside temperature* Room Humidity display* Maximum or minimum memorization function * Alarm clock function at a desired hour.* Power : 1.5V DC AAA battery

  • Infinity Connector

    Virginia Panel Corporation

    VPC's latest high speed technology allows for concerns about cycle life and lost time due to PCB soldering and change out to be a thing of the past. The unique design of VPC's VTAC, QuadraPaddle, and Micro Power SIM connectors allows for change out and replacement of pass-thru inserts while preserving the right angle connection to the PCB.  The unique design of the SIM module offers up to 34 positions and allows for mixed input/output combinations.

  • Instrument Transformer

    NEO TELE-TRONIX PVT. LTD

    Our company has achieved a reputed niche in international market by manufacturing and exporting a great range of Instrument Transformer. Widely used in electrical, power generation and engineering sector for transforming voltage or current level, this equipment is in accordance with industry standards. Manufactured using excellent grade raw materials sourced from reputed vendor, Instrument Transformer is offered to clients in different technical specifications. We stringently test this instrument on varied standard parameters.

  • Line Injector

    J2120A - PICOTEST Corp.

    While the injection transformer is a very wideband adapter, it is not useful for measuring ripple rejection (PSRR) of a power supply or even an opamp. This is because the attributes that make the injection transformer perform so well also result in a transformer that is intolerant of DC current. Even very small DC currents (5mA or less) can greatly reduce the signal capacity or even totally saturate the transformer. For this reason, the Picotest line injector (J2120A) is another essential test adapter.

  • LPT port 4 bit diagnostic card for Desk pc and notebook

    ST8669 - Shenzhen Sintech Electronic, Inc.

    1. It is fit for both laptop and desktop with the parallel port (LPT) to which POST codes is output.USB provide power.2. The value of four-bit-code PC Analyzer's "initiative code" is specified and it is "0000" or "FFFF"."initiative code" is clear at a glance. While the value of conventional two-bit-code PC Analyzer's "initiative code" is uncertain and man is unable to distinguish accurately by unaided eye.3. Court defects by difference sounds coding with build-in speaker。

  • Multichannel Recorder-Analyzer

    ViTec Co. Ltd

    Portable measuring complex for control, registration and analysis of parameters of electrical devices of the subway and railway.The measuring unit of the portable recorder of electrical devices is based on the measuring equipment of the NI CompactRIO platform manufactured by National Instruments (USA, www.ni.com ), which is placed in a special case for transporting the Pelican-Storm iM2450 with an instrument front panel and connectors for connecting a source (s ) power supply, user's workstation computer and sources of measured voltage current signals.

Get Help