Showing results: 796 - 810 of 2823 items found.
-
LPUVB03BLAV -
Delta OHM S.r.L.
The LPUVB03BLAV probe measures global irradiance (W/m²) on a surface area (m²) in the UVB (280 nm…315 nm) spectral region. In particular, the spectral sensitivity is focused at 305 nm, with a bandwidth (FWHM) of 5 nm. The global irradiance is the result of the sum of direct solar irradiance and of diffused irradiance incident on a planar surface.
-
84-08-15 -
Testing Machines, Inc.
The Probe Tack Adhesion Fixture is a tool used for the measurement of the pressure sensitive tack of adhesives. Tack is typically measured as the force required to separate an adhesive and the adherend shortly after having been brought into contact under a defined load of known duration at a specified temperature. Tack is measured as the maximum force required to break the adhesive bond.
-
DP750-100 -
Shenzhen Micsig Instruments Co., Ltd.
*The leads and probe are with shielded design, interface ends are integrated in a compact box, no need to twist the cables, leads to a lower noise floor and has less interference. *Support one-press Zero calibration and automatic overrange alarm.*Directly powered by Micsig UPI interface, realise auto scaling setup, can also powered by oscilloscope via USB cable.
-
MPI Advanced Semiconductor Test
MPI’s 200 mm and 300 mm automated probe systems are dedicated and designed to address current and future requirements for all facets of Device Characterization for Modeling and Technology/Process Development, Failure Analysis, Design Verification, IC engineering, Wafer Level Reliability as well as special requirements for MEMS, High Power, RF and mmW device testing.
-
Gardien S.C.A.
Gardien has been present in the PCB industry since the advent of the personal computer. In our beginning Mania, the company that pioneered some of the first electrical grid testers used by PCB fabricators. We still produce class leading equipment to this day, such as our line of Gardien Flying Probe Testers and our Acceler8 Scanning System.
-
RET-3 ISO -
Physitemp Instruments
• An isolated sensor (can be used with monitoring equipment where electrical interference from other electrodes may be present).• Reinforced strain relief for applications where probe is in more frequent use.• Smooth ball tip. Stainless steel shaft - 3/4'' long, .028'' diameter. Tip diameter .065'', 5 foot lead length. Time constant 0.5 seconds.
-
RET-2 ISO -
Physitemp Instruments
• An isolated sensor (can be used with monitoring equipment where electrical interference from other electrodes may be present).• Reinforced strain relief for applications where probe is in more frequent use.• Smooth ball tip. Stainless steel shaft - '' long, .059'' diameter. Tip diameter .125'', 5 foot lead length. Time constant 0.8 seconds.
-
IWATSU Electronic Co., Ltd.
*1 Measured at 23°C environment connected to PS-02/PS-03 power supply(optional)*2 Broadband Noise, Bandwidth 30 MHz*3 Referred of output*4 Must be met to achieve best performance and avoid Damage to the Probe*5 Parts#890-880-104 : Twinholder M6 and 890-880-112 : Pair of Rail Clip Connectors 4mm are optional.
-
Insight Scientific
This is the fully automatic semiconductor probe assembly and test equipment. It features ultra high precision in assembly process and the intelligent inspection of the finished products. This product is one of the most technologically advanced equipment by international standards in this industry and been exported to North America.Key Features: ● Assembly Precision:15um ● UPH:720 ● Visual Inspection included ● Spring Force Test
-
DPO7OE1 -
Tektronix, Inc.
The DPO7OE1 is a 33 GHz, low noise, broad wavelength optical probe with optical reference receiver (ORR) performance for 28Gbaud PAM4 and PAM2 (NRZ). The DPO7OE1 can be used as a conventional Optical-to-Electrical (O/E) converter for wide-bandwidth optical signal acquisition. The DPO7OE1 provides an FC/PC or FC/APC optical connection for Tektronix DPO/MSO70000 C/DX/SX model oscilloscopes for high-speed optical signal verification.
-
CSP-C2 -
TEGAM Inc.
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
CSP-C1 -
TEGAM Inc.
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
CSP-F1 -
TEGAM Inc.
TEGAM''s Humitran-C Series offers a total temperature and humidity monitoring solution for virtually any application. Each temperature/ humidity controller includes an RH & temperature duct probe, which can be placed up to thousands of feet from the controller. The C series controllers have dual set points with recorder and relay outputs for interfacing to air temperature & humidity devices.
-
Tektronix, Inc.
Depend on Tektronix to provide you with performance you can count on, and industry-leading service and support.*Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm*High-bandwidth DC up to 1.2 GHz*High Gain 1 V/mW*Low Noise <11 pW/√Hz*Probe Connects to DPO7000*1 and DPO/DSA/MSO70000*2Series*SONET/SDH and Fibre Channel Reference Receiver Performance
-
PP319FTC -
Matco Tools
Full functioning voltmeter measures in 1/10th of a volt increments from 1/10th of 1V up to 70V. Easy to read dual polarity indicators: red (+) symbol indicates positive green (-) symbol indicates negative. Circuit breaker protects the vehicles electrical system and your Power Probe. 20' extension lead gives you 40' total of lead. Great for RV'S, trucks and trailers.