Showing recent results 196 - 210 of 568 products found.
-
Tag-Connect - Tag-Connect, llc
Tag-Connect is a simple and secure way of connecting debuggers, programmers and test equipment to your PCBs. Tag-Connect uses a specially designed and patented connector for making the connection to your PCB (Patent Pending for the -NL versions). Tag-Connect eliminates the need for a programming or JTAG connector on your PCB.
-
NT5000 - Navatek Engineering Corp.
The NT5000 is a ROM emulator based functional test system that resides inside a PC host. The PC running the Windows operating system provides the programming environment for the NT5000 using a dynamic link library provided with the product. The NT5000 CPU Commander is comprised of several functional areas.
-
HCE - FuG Elektronik GmbH
Compact sizeLight-weightAnalog programming as a standardFor units from 6.5 kV nominal voltage on, all HV components are moulded in (removable) siliconShort circuit and flashover proofUnlimited operation with rated current in a short-circuit conditionUnlimited operation with rated powerVoltage regulationAdjustable current limitControl mode indicated by LEDs
-
NetUSB-1149.1/E - Corelis
The NetUSB-1149.1/E (4 TAPs) is an advanced USB 2.0 and LAN-based controller that can be used in the testing and/or in-system programming (ISP) of devices, boards, or systems compliant with the IEEE-1149.1 standard. The NetUSB-1149.1/E controller supports concurrent (gang) testing and in-system programming of CPLDs and Flash devices at TCK rates of up to 80MHz.The controller connects to the computer either through the USB interface or LAN interface for easy installation at nearby or remote locations. Other features include signal delay compensation for long cable lengths to the UUT, TAP signals, and GPIO discrete signals which are individually programmable from 1.25V to 3.3V, programmable slew rate control and pre-power up test for shorts between power and ground traces on the UUT.
-
448Pro2 - Dataman, Inc
The Dataman 448Pro2 is a super fast PC based gang programmer with four independent 48-pin ZIF sockets, ISP capabilities and USB 2.0 connectivity • Up to 75% faster programming of high-capacity memory devices • Over 105,000 devices supported with new devices added monthly • Independent modules supporting concurrent programming • Intelligent pin drivers operate down to 1.8V so you'll be ready to program the full range of advanced low-voltage devices • Full ISP capabilities including JTAG compatibility • Hi-speed USB 2.0 connectivity • Easy to use software compatible with the latest operating systems including Windows 10 • Comprehensive 3 years parts and labor warranty • Free life-time software updates
-
DMC-52xx0 - Galil Motion Control, Inc.
The DMC-52xx0 EtherCAT Master is Galil Motion Control's first 32 axis motion controller. It is a pure EtherCAT controller capable of controlling up to 32 drives and 2 IO modules on one EtherCAT Network in a small, space efficient package. The DMC-52xx0 makes configuration and programming easy with just a handful of EtherCAT configuration commands and Galil’s intuitive, two-letter programming language. The DMC-52xx0 is offered in 2, 4, 8, 16, and 32 axis formats. Coordinated moves can be done within banks of 8 allowing for minimal changes to Galil’s programming language. Galil supports a variety of EtherCAT drives to accommodate most applications. The DMC-52xx0 operates in Cyclic Synchronous Position mode (CSP). In this mode the servo control loop is closed on the EtherCAT drive while the Galil sends motion profile data at a 1 kHz rate. The DMC-52xx0 features 8 uncommitted opto-isolated inputs and 8 uncommitted opto-isolated high power outputs. It also includes 8 uncommitted analog inputs and 8 uncommitted analog outputs. One 100 Mbps Ethernet port and one USB (serial) port are provided for communication with a host PC or external devices.
-
MultiTest 50-i - Mecmesin Limited
The MultiTest 50-i provides a powerful and comprehensive twin-column tensile test system for high capacity force measurements up to 50kN. With full programming capability and a large selection of analysis options, through the power of Emperor™ software, the MultiTest 50-i offers unparalleled tensile test versatility.
-
MultiTest 25-i - Mecmesin Limited
The MultiTest 25-i provides a powerful and comprehensive twin-column tensile test system for high capacity force measurements up to 25kN. With full programming capability and a large selection of analysis options, through the power of Emperor™ software, the MultiTest 25-i offers unparalleled tensile tester versatility.
-
HCP - Memmert GmbH + Co.KG
Does your application temperature lie between 8 C above room temperature and 90C, with controllable humidity? Then the Memmert humidity chamber HCP is unbeatable in price, performance and comfort. The almost unlimited programming possibilities of temperature profiles make ideal environmental conditions for the load possible.
-
IXXAT Automation GmbH
The large number of different industrial Ethernet standards difficult to date often developing since had to be used other interface cards or programming interfaces for each protocol. Through its protocol independent approach IXXAT INPACT simplifies development considerably and allows for the most diverse applications.
-
SINEAX Series - GMC-I Messtechnik GmbH
Heavy-current power meters are programmable and may be used for the measurement of almost all quantities of an electrical power system. The application (system configuration) as well as the behaviour of the analog and digital outputs are software configurable. The measurand acquisition via programming or bus interface during normal operation is also supported.
-
66002A - Keysight Technologies
Keysight high performance DC power supplies offer speed and accuracy for test optimization. The Keysight 66000 modular power system simplifies test-system assembly, cabling, programming, debugging and operation. The 66002A Rack Mount Kit allows the 66001A Keyboard to be installed in standard ATE rack.
-
Campbell Scientific, Inc.
Data acquisition software is used for a variety of purposes: to support datalogger programming, enable communication between dataloggers and computers or mobile devices, manage data files, and display data in graphical formats. More advanced users can add custom capabilities or interfaces with our software development kits.
-
Reedholm Systems
Reedholm has configured an integrated system, not just a set of boxes, for testing high power devices at the wafer level. Sophisticated testing, prober control, and database management do not carry a programming burden. As a result, fast, automated wafer testing is done in an inexpensive, compact probing platform.
-
Sherlock-300I - Manncorp
Sherlock-300I integrates cleanly with your existing production line to provide complete defect coverage before and/or after reflow or after wave soldering. Powerful algorithm-based software detects defects and helps to improve your process. Programming can optionally be done at an offline station to prevent disruption of production.
