Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 1621 - 1635 of 2272 products found.

  • Reclosers

    Omnicor

    Automatic Circuit Reclosers (ACRs) are a class of switchgear which is designed for use on overhead electricity distribution networks to detect and interrupt momentary faults. Also known as Reclosers or Auto-reclosers, ACRs are essentially medium voltage rated circuit breakers with integrated current and voltage sensors and a protection relay, optimized for use as an overhead network distribution protection asset. Commercial ACR's are governed by the ANSI/IEEE C37.60, IEC 62271-111 and IEC 62271-200 standards. In ANSI countries three major classes of operating voltage are 15.5 kV, 27 kV and 38 kV.

  • Signal Conditioner

    90131 - HITEC Sensor Solutions Inc.

    Model 90131 Bridge sensor is a self-contained, AC powered, signal conditioning module for bridge type sensors. It contains a precision differential instrumentation amplifier with filtered output and a highly regulated low noise, adjustable output bridge excitation source. The unit is completely encapsulated for use in rugged environments. The output filter cutoff frequency is 200 Hz and may be lowered by adding two external capacitors.

  • Signal Conditioners

    Datexel

    Datexel has a large range of Signal Conditioners. We manufacture Thermocouple Transmitters, that are either Head Mounted, Din Rail and we even have an OEM version that can fit inside an enclosure smaller than 1" x 1/4". These Temperature Transmitters are PC programmable or DIP Switch programmable. Some are isolated and accept input from various sensors such as RTD's, Thermocouples Voltages, Current, Resistance and Potentiometers. They have current outputs and we even have Temperature converters that have voltage outputs.

  • Signal Splitter

    G Systems, l.p.

    The Dynamic Signal Buffered Splitter protects sound and vibration sensor acquisitions from the unwanted effects of a parallel troubleshooting or diagnostic instruments. G Systems Dynamic Signal Buffered Splitter provides buffered and unbuffered outputs connected to the same signal input. Up to 16 sensors, typically accelerometers, proximity probes, microphones, and pressure transducers, may be connected to the 16 signal inputs.

  • Signature Compression Only Load Button Load Cells

    SLB SERIES - Transducer Techniques, Inc

    The SLB Series Subminiature load cells (Load Buttons) are offered for compression only applications where space is limited. The matching surface must be flat for ultimate accuracy. The loading diameter is slightly convex for accurate load distribution. These sensors are manufactured from heat treated 17-4ph stainless steel, and the sensing element incorporates bonded foil strain gages of the highest quality. They are sealed for protection against most industrial environments.

  • Silicon Photomultiplier Module

    MiniSM - SensL

    SensL’s MiniSM silicon photomultiplier (SiPM) modules are a range of high gain, single-photon sensitive, visible light sensors. They have performance characteristics similar to a conventional PMT, whilst benefiting from the practical advantages of solid-state technology. The MiniSM module offers a simple, plug-and-play set up that allows the user to achieve high performance with the minimum of ancillary equipment. The MiniSM module cools the SiPM sensor, providing a significant reduction in the dark count noise.

  • Simulation Software

    CoventorWare - Coventor

    CoventorWare is an integrated suite of design and simulation software that has the accuracy, capacity, and speed to address real-world MEMS designs. The suite has many MEMS-specific features for modeling and simulating a wide range of MEMS devices, including inertial sensors (accelerometers and gyros), microphones, resonators, and actuators. The included field solvers provide comprehensive coverage of MEMS-specific multi-physics, such as electrostatics, coupled electro-mechanics, piezoelectric, piezoresistive, and damping effects.

  • Single Channel Data Logger

    IM2010 - Ajinkya Electronic Systems

    Ajinkya Electronic Systems offer to our clients single channel data logger that can accept only one type of input. The input is factory set and it can be any of the sensors required. There are the applications where the input is not a sensor input, but a data stream, such as modbus or a dedicated protocol. Single channel data logger can be configured to accept data input and extract reading from it that can be stored in memory

  • Single-Channel USB Carrier Demodulator

    CD17 - Validyne Engineering

    The Validyne model CD17 is a USB-powered carrier demodulator for Validyne variable reluctance pressure sensors such as the DP15, DP45 and DP103. The CD17 allows any Validyne variable reluctance sensor to be used directly with a PC via the USB port. Communication and power via USB interface provides remote zero and span adjustment as well as digital pressure readings in mV/V. Drivers and software for the USB interface are included.

  • Remote Monitoring Device System for Manufacturing

    DAMO - DA-Design Oy

    DAMO is a new generation operation and condition monitoring device for OEM machinery, specifically for rotating machines. DAMO helps to increase operational time of processes and helps to avoid superfluous shutdowns. DAMO monitors, stores events and operational history of machines 24/7. It records, analyses and stores operational data, prints out graphics, estimates maintenance periods, generates warnings and alarms to users. The device also gives preliminary information for maintenance and traces the causes. DAMO has versatile wired and wireless connectivity to sensors and networks.

  • Remote Speed Test, Wi-Fi

    Epitiro

    Measure Wi-Fi performance — at key locations, 24×7. Remote Speed Test automatically runs network and app performance tests all day, every day. Just connect the Remote Speed Test sensor to your Wi-Fi and we’ll do the rest! Performance results collected by all your sensors are delivered conveniently to your smartphone. 802.11 b/g/n/ac 2.4 and 5.0 GHz

  • R-value, Humidity& Surface Temperature Measurement System

    gOMS - greenTEG AG

    U-value, R-value, humidity, and surface temperature measurements via a cloud based multinode system. The gO Measurement-System is a cloud-based, wireless system for U-value, R-value, surface temperature, and humidity measurements. It allows for simultaneous measurements with up to 16 sensors and real-time remote monitoring. It is the only system on the market which gives you hard data about the insulation quality of building elements. The gOMS is especially designed for applications in building physics..

  • Resistors for Calibration of Current Measuring Systems and Sensors/Transducers

    ChenYang Technologies GmbH & Co. KG

    Is designed and made according to the Standard JB/T8225-1999 for DC resistors used in laboratory and electrical engineering.By using full closed structure and automatictemperature control it ensures resistor good long-term stability and small temperaturecoefficient. This DC resistor is very suitablefor DC current measurement and calibration of current measuring systems and current sensors. The maximal measuring current is 100A with measuring accuracy of ±0.02%

  • Chemical Detection System

    LaserWarn - Block Engineering

    Eye-safe laser beams and low-cost retroreflectors provide real-time, 24/7 early warning of Toxic Industrial Chemicals (TICs), Chemical Warfare Agents (CWAs) and other chemicals. Any target gas crossing the lasers, even at low concentrations, will be detected with a sub-second response time. The system requires no consumables, and is low maintenance compared to conventional networks of point sensors.

  • Climate Chamber

    ICH - Memmert GmbH + Co.KG

    Its excellent temperature and humidity homogeneity positions the climate chamber ICH in the international top league of stability test chambers. Thermal transfer to the interior whether heat or cold is guaranteed through a large-area air jacket on four sides. Thanks to its hermetically sealed interior, the climate chamber ICH does not consume any water once the setpoints have been reached, provided that the door is not opened. Two high-grade platinum temperature sensors with mutual monitoring guarantee interruption-free long-term operation even if one sensor should fail.