Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 1801 - 1815 of 2398 products found.

  • PMAC 3000 Process Monitor and Control instrument

    90424 - HITEC Sensor Solutions Inc.

    The PMAC 3000 is a multi-functional Process Monitor and Control instrument, designed to operate with Sensor Developments Inc. Auto-ID sensors.  Model 90424 has been enhanced to support quadrature encoders.  This functionality is supported via Auto-ID and third party sensor programming.  For easy verification, the encoder version will show the extension “E” when the software version number is displayed at power up.

  • Potentiometer for OEMs

    FlexiPot - Tekscan, Inc.

    The best user interface, whether in consumer electronics or industrial controls, contains sensors that cause minimal interference, meaning the user may not even know they are there. FlexiPot, by Tekscan, is a flexible membrane potentiometer with an ultra-thin (0.008"), lightweight profile. Low power requirements combined with a linear output make it the ideal position sensor, from both a manufacturing perspective as well as a user perspective.

  • Pulse Generator

    Digital Ring Kits - Electro-Sensors, Inc.

    NEMA C frame rings provide mounting for 1101, 1201, and 1202 shaft speed sensors for use with 199SM magnet wheels on motors with NEMA C frames. The DRK (Digital Ring Kit) Series provides a single-channel output and the QDRK (Quadrature Digital Ring Kit) Series offers a bi-directional output. Kits include mounting ring, hardware, magnet wheel, and sensor.

  • Radar Level Sensor

    VRS-20 - Valeport Ltd,

    Versatile and simple to install, the VRS-20 has been developed by Valeport to work seamlessly with the TideMaster Tide Display/Logger and other third party data loggers using RS232, RS485 and SDI-12 communication. Non-contact technology removes the installation, corrosion & fouling issues of submerged sensors, while simplifying datum control. Accuracy and performance are unaffected by changes in water density and atmospheric conditions.

  • Resistors for Calibration of Current Measuring Systems and Sensors/Transducers

    ChenYang Technologies GmbH & Co. KG

    Is designed and made according to the Standard JB/T8225-1999 for DC resistors used in laboratory and electrical engineering.By using full closed structure and automatictemperature control it ensures resistor good long-term stability and small temperaturecoefficient. This DC resistor is very suitablefor DC current measurement and calibration of current measuring systems and current sensors. The maximal measuring current is 100A with measuring accuracy of ±0.02%

  • Rotary and Linear Potentiometers

    BEI Industrial Encoders

    Rotary potentiometers are available in wirewound, conductive plastic and hybrid configurations. Single or multi-turn configurations are available up to 3600 (10-turns) of motion. These rugged, reliable contact sensors can meet IP66/67 sealing requirements and provide operational life exceeding 10 million cycles. A variety of terminations are available, including integral connectors and flying leads. Adapted and custom solutions for are also available.

  • sCMOS Cameras

    Dhyana Uncooled Camera - Fuzhou Tucsen Photonics Co.,Ltd

    The Dhyana series use sCMOS sensors, compared to a CCD structure, sCMOS differs because amplification and A/D conversion takes place on the sensor. Each column of pixels is connected to a high gain and low gain amplifier followed by an A/D converter. Therefore, sCMOS not only has the advantage of low readout noise and high sensitivity, but also high-speed CMOS readout speed.

  • Signal Splitter

    G Systems, l.p.

    The Dynamic Signal Buffered Splitter protects sound and vibration sensor acquisitions from the unwanted effects of a parallel troubleshooting or diagnostic instruments. G Systems Dynamic Signal Buffered Splitter provides buffered and unbuffered outputs connected to the same signal input. Up to 16 sensors, typically accelerometers, proximity probes, microphones, and pressure transducers, may be connected to the 16 signal inputs.

  • Single Channel Data Logger

    IM2010 - Ajinkya Electronic Systems

    Ajinkya Electronic Systems offer to our clients single channel data logger that can accept only one type of input. The input is factory set and it can be any of the sensors required. There are the applications where the input is not a sensor input, but a data stream, such as modbus or a dedicated protocol. Single channel data logger can be configured to accept data input and extract reading from it that can be stored in memory

  • Single Channel Signal Conditioner

    SAM-3 - Macintyre Electronic Design Associa

    The SAM-3 is a portable single channel signal conditioneer specifically tailored to provide power to and process the signals from MEDA's line of AC magnetic field sensors. The unit operates from eitherits internal batteries or the power line. It incorporates two sets of power line rejection fileters, switch selectable fro 50 to 60 Hz and the corresponding first four harmonics.

  • Single Channel Signal Conditioner

    SAM-3 - Lamar Technologies, LLC

    The SAM-3 is a portable single channel signal conditioneer specifically tailored to provide power to and process the signals from MEDA's line of AC magnetic field sensors. The unit operates from eitherits internal batteries or the power line. It incorporates two sets of power line rejection fileters, switch selectable fro 50 to 60 Hz and the corresponding first four harmonics.

  • Ultra-High Vacuum CVD Process System

    Model UHV-CVD-5000 - TEK-VAC INDUSTRIES Inc.

    ur Ultra-High Vacuum CVD system is utilized for multi-wafer processing of doped and intrinsic high quality epitaxial films, including materials such as Silicon Germanium.End products include SiGe components (RF & microwave devices, amplifiers, switches, discrete HBTs, and low noise MMICs) utilized in wireless communications applications such as cellular phones, pagers, local area networks, telemetry and sensors.

  • Web Sensor

    T7510 - COMET SYSTEM, s.r.o.

    Web Sensor with built-in temperature, relative humidity and atmospheric pressure sensors. High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Dual line LCD is an advantage. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.

  • Fire Suppression/Detection

    Dexter Research Center, Inc.

    Dexter's sensitive yet rugged fire detectors, or fire sensors, serve as the foundation of US combat fire suppression systems on combat aircraft and ground vehicles ranging from the HUMVEE to the Abraham's Tank.  Our fire sensors consume low energy, making them the premier safety component on battery-powered as well as hot-wired systems.  We like to call them "the eye that never sleeps."  How fast are they?  Fast enough to race the fire caused by a rocket hitting a fuel tank and win, triggering fire suppression on the spot to help protect soldier and pilot alike. Rugged missions require rugged equipment.  Intensive MIL-STD-883H testing performed by Trialon Corporation, an independent testing facility, confirm that Dexter Research's silicon-based temperature sensor detectors meet the same rugged requirements of 1,000G's for mechanical shock and 30G's in random vibration for which our thin-film detectors are famous.  Download Dexter's report here (PDF).

  • Luminance Colorimeter

    XYL-VI - Lisun Electronics Inc.

    The XYL-VI Luminance Photoelectric Colorimeter changes the traditional structure thoroughly, employs the digital X(λ), Y(λ), Z(λ) sensors to replace the traditional analogue sensors, employs the digital signal measurement system to replace the traditional analogue measurement system. The instrument has no analogue unit, thus it is very simple to overcome the zero drift that is impossible to be avoided in traditional colorimeter. The digital sensor has a large dynamic range. Moreover, it possesses strong anti-interference ability and it has high accuracy. The XYL-VI Luminance Colorimeter contains internal RS232 computer interface. The calibration is done by software. It is suitable for monitoring and remote applications. The XYL-VI Luminance Colorimeter can be calibrated by XYL-VI Luminance Colorimeter software to sample the data and print out the results. It can also be corrected by other standard light sources to obtain very high measuring accuracy of x, y color coordinates and color temperature. It is a real-time measuring system and run under Windows2000/XP.