Showing recent results 1831 - 1845 of 2213 products found.
-
PCE Instruments
Here you will find combustion gas analysers to control and test combustion by means of the Sprint V model. The application of combustion gas analysers is based on a gas sampling which flows through a chimney or a funnel. A sample of gas is taken through a hole to obtain the concentration of the components by means of electric analysers provided with electro-chemical sensors. Combustion analysers also have a thermocouple probe available to measure gas temperature as well as a memory program which displays combustion efficiency in relation to the gas analysis, gas temperature and ambient temperature.
-
PCE Instruments
Pyrometers are ideal for taking accurate measurements of temperature without contact. Thanks to the optical mechanism utilised by the pyrometers, these pyrometers arePyrometers for taking accurate measurements of temperature without contact. safe for measuring high temperatures. Their infrared capabilities make pyrometers the perfect tool to use when conventional sensors are inadequate. This is in cases when the object is moving, extremely hot, in a difficult place to access or due to contamination or other such negative influences.
-
e-con Systems Inc.
e-con Systems Camera Modules come with parallel & MIPI interfaces. Our CMOS camera modules will be effective in any application or environment because of their versatility and wide range of options. Embedded camera module can be interfaced to processors like Tegra K1, i.MX6, DM3730, OMAP. Further to these HD camera modules, e-con offers evaluation boards with these camera modules interfaced to various development boards featuring these processors. We provide Omnivision Camera Module & Aptina Camera Module (ON Semiconductor) with CMOS Sensors.
-
See3CAM - e-con Systems Inc.
See3CAM - a new series of USB 3.0 Camera. It's the world's first UVC compliant USB 3.0 Camera Module that is plug & play on Windows/Linux. USB 3.0 camera board does not require additional device drivers. These USB3 cameras work with standard Windows (DirectShow) and Linux (V4L2) software. USB3 Camera is based on Aptina & OmniVision CMOS sensors.
-
Princeton Applied Research
Frequency Response Analysis (also referred to as Transfer Function Analysis) measures the output spectrum of a system relative to a stimulus, and is used to characterize the dynamics of the system under test. The technique measures the magnitude and phase relationship between output and input waveforms as a function of frequency. The input signals may be from a wide range of sensors including acoustic (microphones/sonar), mechanical (accelerometers/displacement transducers), optical (photodetectors), and electrical (amplifiers).
-
M1-25M/XXE - Elmika
The M1-25M/XXE series instruments are high precision broadband Calorimetric Sensors operating in millimeter and sub-millimeter wave range on a principle of substitution of microwave power by direct current power, using an autocompensating transistor transducer. Calorimetric Sensor is supplied with Calorimetric Power Meter M1-25M (measurement and indicator block), which provides PC connection via USB interface.Calorimetric Power Meter with Calorimetric Sensor provides accurate absolute power measurements in single mode and multimode waveguides (Metal Dielectric Waveguide) which could be a priority for terahertz physics and technology.
-
Fraunhofer Institute for Telecommunications
The Computer Vision and Visualization Department consists of three research and development groups working on innovative technologies in the field of monocular, stereoscopic and multichannel video processing. It covers the entire processing chain from original capture to rendering, with a focus on advanced 2D and 3D analysis, post-production synthesis, computer vision, image understanding, human-machine interaction, and immersive media , The department also has expertise in processing complex systems consisting of multiple cameras, sensors, displays, projectors or screens.
-
Mors Smitt Group
A latching relay is a two-position electrically-actuated switch. It maintains either contact position indefinitely without power applied to the coil. It is controlled by two momentary-acting switches or sensors, one that 'sets' the relay, and the other 'resets' the relay. The latching relay maintains its position after the actuating switch has been released, so it performs a basic memory function.
-
NuTAP - Omnicor
NuTAP provides a safe, secure and cost-effective way for the deployment of IDS sensor into full-duplex links by aggregating both directions of the full-duplex streams on up to 4 different network segments into a single 1000Mbps monitoring port. The IDS sensors could then see both conversations on each side of the monitored network segments with only one interface. Because the IDS sensor is hidden behind the TAP, it’s shielded from direct attacks from the link being monitored.
-
Gambit Communications, Inc.
MIMIC MQTT Simulator is a scalable, customizable, programmable,predictable, dynamic simulation platform designed to enable rapid development/ testing / deployment / tuning / training / demonstration of large-scaleInternet of Things applications. MIMIC creates a real-world, real-time test lab with thousands of IoTsensors, gateways and devices. It allows suppliers of MQTT sensors,devices, gateways, brokers and applications to design, develop and testtheir Brokers, Load balancers and clients using secured connections,in a virtual and scalable network environment.
-
Gambit Communications, Inc.
It is a suite of simulators to cover all protocols required by IoT Applications, Middleware, Brokers, Load Balancers, MQTT gateways and clients. MIMIC allows suppliers of sensors, devices and applications to design, develop and test their applications using secured connections, in a virtual and scalable network environment.It is specifically designed to mitigate risks associated with deploymentof large IoT applications by rapid prototyping of multiple alternatives,and load and feature testing of many scenarios.
-
Omnicor
Automatic Circuit Reclosers (ACRs) are a class of switchgear which is designed for use on overhead electricity distribution networks to detect and interrupt momentary faults. Also known as Reclosers or Auto-reclosers, ACRs are essentially medium voltage rated circuit breakers with integrated current and voltage sensors and a protection relay, optimized for use as an overhead network distribution protection asset. Commercial ACR's are governed by the ANSI/IEEE C37.60, IEC 62271-111 and IEC 62271-200 standards. In ANSI countries three major classes of operating voltage are 15.5 kV, 27 kV and 38 kV.
-
Marposs S.p.A.
Marposs offers solutions and equipment that make your machine tool an instrument of unprecedented precision, productivity and reliability. Touch probes and laser-based tool setters hold the cutting process accuracy in check. Our balancing actuators and many dedicated sensors guarantee that your machine tool's functional processes never deviate from their specified set points.
-
Saint-Gobain Crystals
Crystal scintillation detector plates are widely used in Nuclear Medicine to image tissues containing gamma-emitting tracer compounds introduced into the patient. A matrix of photomultiplier tubes or other light sensors optically coupled directly to the detector or a window detect the scintillation photons produced in the crystal. The camera system electronics compute the locations of the scintillation events in the crystal and evaluate the corresponding intake of the tracer in the tissue. This information is expressed in the image.
-
ViTec Co. Ltd
The acceptance test station consists of a personal computer - the workstation of the operator of the testing station, contact mechanisms, as well as current and voltage sensors. The station allows to test up to 10 electric motors of various types simultaneously. The operator of the testing station indicates the test sites at which the engine tests will be conducted, their type (from the database), serial numbers and a set of tests.
