Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 1996 - 2010 of 2267 products found.

  • PXI Resistor Module 4-Channel 1R to 63.7R with SPDT

    40-293-111 - Pickering Interfaces Ltd.

    The 40-293 is a Programmable Resistor module with two channels of 16-bit, two channels of 12-bit or four channels of 8-bit resistor chains in a single 3U PXI module. The module is ideal for simulating sensors for control and management systems under test, allowing the user to verify system response in design verification or manufacturing test applications. The 40-293 can also be supplied with 8xSPDT electro-mechanical relays. These uncommitted relays have a number of uses, including extending the resistor chain, adding additional fault conditions and providing the functionally of a resistor module and an uncommitted relay module in a single PXIslot.

  • PXI Precision Resistor Module 2-channel 10 to 36k

    40-261-002 - Pickering Interfaces Ltd.

    PXI programmable resistors featuring fine resistance setting resolution and excellent resistance stability and accuracy through the use of advanced switching networks and software correction techniques. The two modules in this range support two identical resistor channels that can be set to values of between 1.5 to 2.9k or 10 to 36k with a precision of better than 2m (40-261-001) or 15m (40-261-002- this version) making them ideal for simulating sensors that can be accurately controlled to fine values. Thanks to the use of innovative technology these programmable resistors ensure all resistance values can be setno missing values because of switch resistance or resistor tolerance. Applications include air bag squib, strain gauge and temperature dependent resistor emulation.

  • PXI Precision Resistor Module 2-channel 1.5 to 2.9k

    40-261-001 - Pickering Interfaces Ltd.

    PXI programmable resistors featuring fine resistance setting resolution and excellent resistance stability and accuracy through the use of advanced switching networks and software correction techniques. The two modules in this range support two identical resistor channels t that can be set to values of between 1.5 to 2.9k or 10 to 36k with a precision of better than 2m (this version) or 15m (40-261-002) making them ideal for simulating sensors that can be accurately controlled to fine values. Thanks to the use of innovative technology the 40-261 range ensures all resistance values can be setno missing values because of switch resistance or resistor tolerance. Applications include air bag squib, strain gauge and temperature dependent resistor emulation.

  • Multifunction board

    APCI-3110-16 - TEAM SOLUTIONS, INC.

    The APCI-3110 is a 12-bit multifunction board for 3.3 V and 5 V PCI systems, with optical isolation up to 1000 V and a high throughput rate of 200 kHz. The PCI board has additional types of conversion: Sequence RAM, Auto Refresh, scan, timer or external event.Furthermore, the board has a PCI DMA, 2 watchdogs, 4 digital inputs and 4 digital outputs. Sensors, which allow to supply current signals instead of voltage signals, also can be acquired with the APCI-3110, as this board offers up to 16 current inputs. The board is protected against overvoltage and input filter and it is protected against high frequency emmission. With the free calibration tool you can do the fine adjustment on-site.

  • Multi Function Tribometer

    MFT-5000 - Rtec Instruments

    The state of the art Rtec Multi Function tribometer Mft-5000 is globally regarded as the most versatile and technologically advanced tribometer. Manufactured at silicon valley, California it is used by several top labs, universities and industries. The tribometer offers next generation patented force sensors with ultra low resolution, highest speeds and wide environmental control range than any other commercially existing tribometer. The patented integrated 3D profilometer allows to analyse surface change vs time. The universal tribometer MFT5000 allows to create a comprehensive report on friction, wear, tribology and surface analysis.

  • Modbus Data Logger

    Ajinkya Electronic Systems

    Modbus is a popular protocol that is used by manufacturers of instruments and sensors. Site instrumentation already exists and parameters to be recorded are available on Modbus Data Logger. We have in store fro our clients Modbus Data Logger that can read data from these instruments and record them periodically. These loggers are configured as per the site requirements. Though basic operation of any data logger is to record the values of process parameters. However it is important that recorded data is presented to the user in timely and prescribed manner. Also any discrepancies in the readings are conveyed to the operator in the fastest manner for quick action.

  • Multispectral Cameras

    PixelCam - PIXELTEQ

    PixelCam™ multispectral cameras provide live imaging of 3-9 spectral bands at video rates. Simultaneous multi-channel “snapshot” acquisition delivers rich, real-time data without scene change or pixel shift. Custom dichroic filter arrays are integrated into the focal plane array at wafer-level to create robust linear and area sensors that extract high-contrast spectral information at specific visible and infrared wavelengths. This breakthrough technology enables easy integration into handheld, mobile and aerial cameras – all with the same frame rate, size, weight, and power consumption as monochrome cameras.

  • N- Dual Channel Multiparameter Analyzer w/ Modbus

    MemoRail Modbus A1405 - ALVI Technologies

    With the increasing demand for a compact and flexible solution to liquid analysis –ALVI Technologies has responded with a new twist in the existing MemoRail. We are pleased to announce the release of our new MemoRail Modbus A1405 N- Dual Channel Multiparameter Analyzer with Modbus that offers an optimal solution for integrating a compact, flexible, all digital analyzer in an extremely cost-effective manner!! Our Dual Channel Multiparameter Analyzer with Modbus can be used with Memosens and digital sensors such as pH (glass and IsFET), ORP (redox), oxygen, and conductivity (conductive and inductive). It’s also the only analyzer in its class that is suitable for use with a digital optical oxygen sensor. All sensor types can be used in any combination in the dual-channel version.

  • Ultrasonic Sensor

    CH-101 & CH-201 - Chirp Microsystems, Inc.

    Tiny millimeter-sized ultrasonic Time-of-Flight sensor is 1/1000 the size of conventional sensors. Ultralow power ultrasonic sensor consumes only microwatts while performing ultrasonic echolocation. This enables always-on sensing for wake-on-approach application for tablets, notebooks, monitors, smart locks, security cameras, and other smart-home devices even when they are running on battery only. Chirp offers an easy-to-use ultrasonic software library (USL) that provides 2D and 3D position tracking using Chirp’s proprietary hardware. Chirp has developed proprietary and patent-pending gesture classification library (GCL) based on machine learning and neural network algorithms. Ultrasonic sensing solution provides millimeter-accurate range information.

  • Specialized Gateways

    B+B SmartWorx

    The SmartSwarm 341 IIoT gateway enables owners, operators, and integrators of remote assets to integrate data from the asset into IIoT applications such as dashboarding, analytics or predictive maintenance. Data can be collected from a number of sources, including web feeds, databases and files, as well as from locally connected physical devices and sensors. SmartSwarm 341 also includes an interface and manager for B Bs Wzzard wireless sensor platform providing robust acquisition and transmission of asset sensor data without the expense or time involved in installing cables. For bulk I/O requirements where cabling is not an issue, it is also compatible with WISE and ADAM Ethernet connected I/O modules

  • SWIR Cameras

    New Imaging Technologies

    Our SWIR or Short-Wave Infrared imaging covers the wavelength range from 900nm to 1700nm. A large number of applications that are difficult or impossible to perform using visible light are made possible, with great results, using short-wave infrared (SWIR) imaging thus enabling the user to "See Beyond the Visible". SWIR is similar to visible light in that photons are reflected or absorbed by an object, providing the strong contrast needed for higher resolution imaging– unlike thermal images, that rely on radiated photons. At NIT, we offer unique SWIR cameras and sensors, see below for more information on our products.

  • Low Profile Compression Only Load Button Load Cell with Mounting

    LBM SERIES - Transducer Techniques, Inc

    The LBM Series (Load Button) load cells are offered for compression only applications where space is limited. This load button is a direct replacement for many of the same type and bolt patterns currently used in the industry. The matching surface must be flat and at least 2 inches in diameter. The loading diameter is slightly convex for accurate load distribution. Eight threaded mounting holes are provided on the bottom surface for fastening down from beneath. These sensors are manufactured from heat treated 17-4ph stainless steel, and the sensing element incorporates bonded foil strain gages of the highest quality. They are sealed for protection against most industrial environments.

  • Software

    DPM-3 - Transducer Techniques, Inc

    Was developed to read and edit Plug and Play Smart Sensors that are compliant to the IEEE 1451.4 Standard. TEDS, or transducer Electronic Data Sheet, is a set of electronic data in a standardized format defined within the IEEE 1451.4 standard. This data specifies what type of sensor is present, describes its interface, and gives technical information such as sensitivity, bridge type , excitation, etc. This information is stored in an EEPROM chip attached to the sensor. By having this chip, the sensor can identify and describe itself to the network and or Smart Load Cell Meter (DPM-3), thereby easing automatic system configuration.

  • Load Cells

    WIM Systems, llc

    The load cells are electronic weight sensors whose purpose is to receive the electrical excitation caused by a certain weight applied to the scale or scale and transmit it to a weight indicator. The load cell is an essential component in any scale or electronic scale and there are in different models and specifications. A Wim load cell is indispensable for a weighing system where accuracy, durability and a fair price are required. WIM-Systems manufactures a wide variety of load cell models, one for every need, as well as offering you all the advice you need You need to choose the model that best meets the particular needs of your weighing system and always with the support of WIM-Systems quality and technology.

  • Software

    SSI-TRES - Transducer Techniques, Inc

    Was developed to read and edit Plug and Play Smart Sensors that are compliant to the IEEE 1451.4 Standard. TEDS, or transducer Electronic Data Sheet, is a set of electronic data in a standardized format defined within the IEEE 1451.4 standard. This data specifies what type of sensor is present, describes its interface, and gives technical information such as sensitivity, bridge type , excitation, etc. This information is stored in an EEPROM chip attached to the sensor. By having this chip, the sensor can identify and describe itself to the network and or Smart Load Cell Meter (DPM-3), thereby easing automatic system configuration.