Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 2326 - 2340 of 2437 products found.

  • CCD Foundry Services

    Teledyne DALSA

    Teledyne DALSA Semiconductor’s 150mm CCD process offers surface or buried channel operation at up to 15V with two or three layers of polysilicon and one, two or three layers of metal. A modular processing approach allows our foundry customers to adjust process parameters to meet the most demanding requirements for CTE (>99.999%), charge storage capacity, and dark current (<1nA/cm2). The base process uses 1X projection lithography with 2.5µm design rules, allowing die sizes of up to 100mm X 100mm. Where required, tighter alignment tolerances and smaller feature sizes can be obtained by using 5X lithography, using a mix and match or all-stepper approach. The maximum die size attainable with the stepper is 22mm X 22mm, but larger sensors can be fabricated using stitching.

  • Confocal Chromatic Highspeed Controller

    confocalDT 2471 HS - Micro-Epsilon Group

    The confocalDT 2471 HS controllers are used for fast distance and thickness measurements of highly reflecting shiny surfaces, enabling measuring rates up to 70kHz without having to use an external light source. The confocalDT HS controllers are considered one of the fastest confocal measurement systems in the world. The controller can be operated with any IFS series sensor and is available as IFC2471LED standard version for distance measurements or as IFC2471MP LED multi-peak version for thickness measurements. The controller can be operated with any IFS sensor and is available as a standard version for distance measurements or as a multi-peak version for thickness measurements. Due to a user-friendly web interface, the entire configuration process of controller and sensors is carried out without using any additional software. Data output is via Ethernet, EtherCAT, RS422 or analog output.

  • Displacement Transducers

    Procter & Chester Measurements Ltd

    Pressure: Measures gas or liquid pressure. Pressure is an expression of the force required to stop a fluid from expanding. The transducer generates a signal from the pressure imposed upon it. Torque: Measures the torque (or twisting motion) on a static or rotating system. The static torque element has little movement and therefore more economic to manufacture and purchase. Rotary or dynamic torque is more complicated as the signal needs to be transferred using slip rings, wireless telemetry or rotary transformers/inductance technology so that the strain gauged shaft can continuously rotate. Displacement: Measures distance. The displacement transducers that PCM offer are slightly different to standard units. They have a strain gauge/wheatstone bridge. The benefit here is that if the customer has existing electronics that uses strain gauge/load cell technology, they can use them with these sensors.

  • IQ Mixers

    Fairview Microwave Inc.

    The new MMIC IQ mixers from Fairview (also known as IQ modulators) utilize a highly reliable GaAs MESFET semiconductor process which integrates a pair of matched double balanced mixer cells, a 90-degree hybrid and a 0-degree splitter/combiner that produces exceptional amplitude and phase balance performance. This level of integration offers size and performance advantages in comparison to discrete module assemblies. With the addition of an external 90-degree IF hybrid module, these IQ mixers can be used as either a Single Sideband Up-converter Mixer or an Image Reject Down-converter Mixer. The benefit of image rejection and sideband suppression can reduce overall system cost and complexity by removing the need for pre-selection filtering. Typical applications include point-to-point and point-to-multipoint radio, VSAT, military radar, electronic warfare, satellite communications, test equipment, and sensors.

  • Light Analysis

    Thorlabs, Inc.

    Welcome to Thorlabs; below you will find links to detectors and instrumentation that measure the various properties of light, a subset of our entire line of photonics products. Thorlabs offers an extensive selection of instruments that measure the properties of light. Our versatile power and energy meters can be used with over 25 different sensors in order to make NIST-traceable power and energy measurements. If the convenience of a meter is not desired, our selection of detectors includes basic photodiodes (uncalibrated and calibrated), photodetectors (biased, amplified, and avalanche), CCD and CMOS arrays, position detectors, integrating spheres, and photomultiplier tubes. The Beam Characterization category contains beam profilers (camera and scanning slit), a wavefront sensor, spectrometers, and interferometers, while the Polarimetery link leads to a selection of instruments used to measure and control the polarization of light.

  • Linear Stages

    Klocke Nanotechnik

    A new set of motorized tables developed by Klocke Nanotechnik allows high strokes at small volumes. The modules are driven by the Nanomotor®. Loads of up to two kg can be moved over centimeters of stroke with down to 2 nm resolution. Manipulation in many degrees of freedom is possible without backlash. The modules NMT xx-L are longer, but thin like a pencil. In most of the NMT-modules position measurement systems can be included without increasing the size. The resolution of the position sensor is better than 10 nm. All NMT modules can easily be fixed onto each other. Very small connectors allow the exchange of a module without removing cables. The NMT-Zxx are modules for vertical movement. They have an internal load compensation to lift up loads. Nanomotor-Grippers and force sensors that can easily be fixed on these modules are available.

  • Minidatalogger

    HD207/227/206/226 - Delta OHM S.r.L.

    HD206…/HD226… and HD207…/HD227… series dataloggers are low-cost, rugged instruments for a long-term reliable monitoring of temperature and temperature/relative humidity measurements. They are available in different versions: with or without LCD display, with sensors either inside or outside the instrument housing, or with cable connection. The analysis of logged data is made using Delta Log2 software for Windows. The datalogger functions of Start, Stop, Configuration, Data Download and Setting of logging interval are selectable either from keyboard or from a computer. Through a computer, you can define a password to enable the access to configuration data. Typical applications are: monitoring of temperature/humidity during transportation, storage of fresh or frozen foods, fruit, vegetable products and flowers, pharmaceuticals, sensitive and photographic products, paper, explosives, as well as laboratory activities in general.

  • Moisture Testers for Wood

    PCE Instruments

    At PCE Instruments you will find diverse moisture testers for wood to determine absolute moisture in different wood types. With the help of the moisture testers for wood you will be able to measure with high accuracy moisture in rolled products, forestry woodVery accurate and easy to use Moisture Testers for Wood for professionals, slats, beams, plywood, panels, conglomerates, main beams, window frames, etc. There are two ways of measuring moisture: with or without damaging the material. Moisture testers for wood are characteristic by the measuring principle and the moisture sensors that can be adapted to them. Some moisture testers for wood have special characteristics such as an automatic compensation of temperature. Besides, data can be stored and transferred to a PC or portable computer or characteristic curves can be programmed for specific wood types (only with the model FMD).

  • Monitoring Systems

    PCE Instruments

    Monitoring systems refer to Professional Monitoring Systems used for the immediate and systematic detection (protocol). instruments used for immediate and systematic detection (protocol), the display or monitoring of a process with technical assistance, sensors or others monitoring systems such as cameras. Monitoring systems perform continuous measurements of a central element so that, according to the comparison of the results, conclusions can be drawn in order to react in-time. The main function of monitoring systems is to act in a process or alarm when it is not carried out as desired or when limit values are exceeded. Monitoring systems are an special type of protocols in which different parameters are checked and tested, as for instance, air humidity, temperature, shocks, movements, flooding as well as current load. Video cameras are an essential part of monitoring systems that allow for a better assessment of the critical point situation.

  • Multi Channel Data Logger

    IM2000 N - Ajinkya Electronic Systems

    These are manufacturer, Exporter, Supplier of Data Logggers. A data logger can accept inputs from one or from many sources and number of channels is an additional parameter that defines the type of logger. The IM2000 Series Multichannel Data Logger offered by us can accept inputs from 2 / 4/ 6 / 8 / 12/ 16 / 20 / 24 / 32 / 48 sources. These are available from 2 to up to 48 channels. The type of sensors that a logger would accept can be of a one particular type or combination of different types or Universal Type. Eg. 16 channels RTD Data Logger or 16 channel K type data logger or it can be data logger which accepts 4 inputs of RTD type and 12 inputs of 4-20mA type. So one can appreciate there can be infinite such type of combinations.

  • Multigas Analyser

    Rapidox 7100 - Cambridge Sensotec

    The Rapidox 7100 Multigas Analyser is a high specification instrument designed for the analysis, control and monitoring of process gas in a wide range of industries. It allows the option of selecting multiple gas sensing configurations to suit the particular application. The analyser is housed within a 19″ (482mm) enclosure for convenient mounting into an industry standard test equipment rack. Up to six gases are simultaneously measured using a range of high precision gas sensors; each sensor is specially designed and calibrated to avoid any cross interference effects with the background process gas. Safety is ensured by the inclusion of flashback arrestors in the gas measuring circuit where required. Measurable gases may include: Measurable gases include amongst others: CO2, CO, H2O, O2, C2H4, SO2, CH4, H2 and H2S.

  • Nanopositioning Stage & Controller

    PInano - Physik Instrumente GmbH & Co. KG

    PInano® XY and XYZ low-profile piezo scanning stages are optimized for easy integration into high-resolution microscopes. They feature a very low profile of 20 mm (0.8") and a large aperture designed to hold Petri dishes and standard slide holders. The long travel ranges of up to 200 x 200 x 200 µm with nanometer closed-loop resolution are ideal for leading-edge microscopy and imaging applications. PInano® series piezo positioning stages are available in two versions: A) Highest Stability, Linearity and Precision with capacitive feedback sensors. B) High Precision with lower cost piezoresistive sensor feedback. Both types provide very high sensitivity and responsiveness as well as nanometer resolution. A proprietary servo controller significantly improves the motion linearity of the piezoresitive version compared to conventional piezoresistive sensor controllers.

  • Networkcontroller

    Klocke Nanotechnik

    A new set of motorized tables developed by Klocke Nanotechnik allows high strokes at small volumes. The modules are driven by the Nanomotor®. Loads of up to two kg can be moved over centimeters of stroke with down to 2 nm resolution. Manipulation in many degrees of freedom is possible without backlash. The modules NMT xx-L are longer, but thin like a pencil. In most of the NMT-modules position measurement systems can be included without increasing the size. The resolution of the position sensor is better than 10 nm. All NMT modules can easily be fixed onto each other. Very small connectors allow the exchange of a module without removing cables. The NMT-Zxx are modules for vertical movement. They have an internal load compensation to lift up loads. Nanomotor-Grippers and force sensors that can easily be fixed on these modules are available.

  • Pitot Static Tester / AoA TESTER

    ADSE 744 - ATEQ Aviation

    This tester was specifically designed for the new-generation pitot tubes that integrate sensing probes, pressure sensors and powerful air data computer processing to provide all critical air data parameters including Pitot and static pressure, airspeed, altitude, and angle of attack. This Pitot Static tester is designed primarily for flightline use to cover the testing of all barometric and manometric pressure instrument systems. The AoA Channel behaves as a second Ps channel, in order to create a differential pressure between the 2 Ps Channel, allowing to performsimulations of different Angles of Attack. The large touch screen display, with on-screen help, enables all checks to be carried out easily on the flight deck or in the cockpit, by a single operator. The ADSE 744 is robust and housed in amobile weatherproof case. An attached bag contains the pressure hoses and electrical cables.

  • PLC's

    Datexel

    The EPL101 PLC is a circuit board OEM PLC. The EPL101 has 4 analog inputs, 7 digital inputs and 2 inputs for Encoders. It has 6 relay outputs, 5 that are rated for 5 Amps and 1 relay rated for 16 Amps. It also has an analog output 0-5 Volts. The outputs can be simple on off or P, PI,PID or PD control. The EPL101 accepts inputs from K, S, T, R, J or E type thermocouples, Pt100, Ni100 RTD'S. NTC10K thermistor inputs. The EPL101 also accepts inputs from sensors with 4-20mA, 0-20mA, 0-20mV or 0-1V signal. It also has 6 digital PNP inputs up to 1 Hz and 2 NPN inputs up to 2 K Hz.