Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement


Showing results 1201 - 1215 of 2109 products found.

  • Pressure Sensor Interface

    USB2251 - Validyne Engineering

    The USB2251 Pressure Sensor Interface provides real-world data acquisition for your PC via the USB port. 8 calibrated variable reluctance pressure sensor inputs are accepted by the USB2251. No external signal conditioning is required.The USB2251 includes a connector panel for sensor cables, calibration constants for each sensor , configuration and data acquisition software. The USB2251 produces a floating-point value for all readings, directly in engineering units.The USB2251 can record pressure readings up to 5000 samples per second. Combined with the fast response of the Validyne VR pressure sensors, the USB2251 is ideal for transient pressure studies. The USB2251 is compatible with the following Validyne variable reluctance pressure sensors: AP10, DP103, DP10, DP45, DP15 DP360, DP215, and DP363. Each sensor is calibrated with the USB2251 at the factory and is ready to make measurements.

  • Gateway Control Systems

    ViTec Co. Ltd

    The system is built on the basis of a panel computer with a touch screen that performs user interface functions and records the measured parameters. The stand is equipped with gate drives and a set of sensors (pressure, flow rate, force). Real-time shutter control is implemented on the basis of the R-series card, for input and conversion of analog signals from the sensors, the expansion basket of R-series cRIO-9151 boards is used.

  • OEM 1-Channel Fiber Optic Signal Conditioner PCB Module

    FOTEMP1-OEM-MNT - Micronor AG

    The FOTEMP1-OEM-MNT is a small form factor PCB interface module designed for low cost insertion of high precision GaAs-based fiber optic temperature sensor technology into OEM applications where common electrical temperature sensors and thermocouples cannot be used. The OEM interface product is compatible with all TS series fiber optic temperature probes. The sensors are entirely non-metallic and electrically passive, providing immunity to EMI, RFI, MR, microwaves and radiation is required.

  • Laboratory Centrifuges

    ACUTRONIC Switzerland Ltd

    Centrifuge systems are designed for the development, test, evaluation and calibration of accelerometers and a variety of inertial devices. Centrifuges provide a cost-effective solution for simulating high-"G" environments in the laboratory. They support testing of devices such as MEMS-based Inertial Measurement Units (IMUs), low-cost quartz or silicon sensors, Ring Laser Gyros (RLGs), Fiber-Optic Gyros (FOGs), fuzes and crash sensors.

  • LVDT I/O Cards

    CP3000 Series - Computer Conversions Corporation

    Universal AC Sensor interface digitizes up to 8 channels of individually Programmable Synchro, Resolver and LVDT/RVDT sensor inputs on a 3U cPCI (Compact PCI) and PXI Compatible plug-in circuit cardProduct allows users to interface into the widest variety of AC Position sensors all programmable within a single cardA must have for anyone using LVDT-RVDT's, Synchros and Resolver sensors or signals, electronic gauging, motion control, and instrumentation.

  • Coordinate Measuring Machines

    VideoCheck® S - Werth Inc.

    Ideal for small measurement ranges that require high accuracyThe Werth constant-stress guideway principle of the X-Y stage ensures high precision and long-term stabilityVideoCheck® S machines use the Werth image processing sensor with telecentric WerthZoom® and Werth MultiRing®Integration of additional sensors and beampath to a multisensory system guarantees higher flexibility and measurement speedMachine can be equipped with a wide selection of additional optical and tactile sensors, including the Werth Fiber Probe

  • High End Portable Laser Power / Energy Meter

    Centauri - Ophir Photonics

    Compatible with all standard Ophir Thermal, BeamTrack, Pyroelectric and Photodiode sensors. Large 7" Full Color Touch Display. Single and Dual Channel models available. Choose between Digital with Bargraph, Analog Needle, Line Plot, Pulse Chart, Pass/Fail, Position, Stability, and Real Time Statistics displays. Dual Channel Instrument supports Split and Merged Graphical Displays.Sophisticated power and energy logging, including logging every point at up to 10000Hz with Pyro sensors

  • Digital Test Switch

    FT-14D - ABB Ltd.

    Test switch solution for digital switchgear using current and voltage sensors. With the FT-14D Digital FlexitestTM switches, a new era of protection relay testing can be performed more safely, quickly and easily. The FT-14D switch allows a customer to integrate current and voltage sensors within digital switchgear and protective relays and thereby enable the Industrial Internet of Things.

  • Digital Ultrasonic Maintenance System

    VPE-2000 - Superior Signal Company

    The Superior AccuTrak VPE-2000 is the first digitally controlled ultrasonic detector. Like two instruments in one it uses two independent sensors supported by separate electronic circuits configured specifically to their own sensor. This assures optimum sound clarity and frequency response. When switching between the airborne and contact sensors all settings are retained in memory! Digital LED meters let you establish baselines, perform trending, and accurately repeat these tests better than older more expensive analog instruments.

  • Digital Measurement

    WN-2 - WaveNode

     Monitor 4 sensors simultaneously for peak, Average power and coax SWR. Direct USB 2.0 full speed interface. Backlit LCD display for stand-alone operation- Your PC is optional. Oscilloscope and Spectrum Analysis of the RF Modulation- Observe IM and "Splatter" frequency components realtime. Complete system includes (1) sensor, WN-2 unit, AC power module and software on CDROM. Wide range of sensors cover 100 milliwatt to 8KW, 1.6 Mhz to 470 Mhz.

  • Device Current Waveform Analyzer

    CX3300 Series - Keysight Technologies

    The mainframes of CX3300 series of Device Current Waveform Analyzers captures measured current waveforms by the Current Sensors with a maximum of 200 MHz wide bandwidth and a maximum of 1 GSa/s fast sampling rate. The data acquisition is done by 14-bit or 16-bit by just selecting the "High Speed Mode" or "High Resolution Mode" from the front panel. To maintain the low noise current sensing capabilities of the Current Sensors, the mainframes are also designed to minimize the noise even under such wide measurement bandwidth.

  • Industrial PoE Camera

    Phoenix - LUCID Vision Labs, Inc.

    The Phoenix machine vision camera delivers the incredible quality and performance of Sony Pregius™ sensors – the industry leading global shutter CMOS sensor. Sony’s global shutter technology captures crystal clear, non-distorted images with exceptionally low read noise and very high dynamic range. Sony’s Pregius CMOS sensors used in the Phoenix cameras provide the imaging quality needed for today’s most challenging tasks

  • Torque Sensor

    Futek Advanced Sensor Technology, Inc.

    Torque Sensors manufactured in US by FUTEK Advanced Sensor Technology (FUTEK), offering a huge selection of Torque Sensors, utilizing one of the most advanced technologies in the Sensor Industry: Metal foil strain gauge technology.A Torque Sensor, is a transducer that converts a torsional mechanical input into an electrical output signal. Torque Sensor, are also commonly known as a Torque Transducer.

  • High Definition Fiber Optic Sensing

    ODiSI - Luna Technologies

    High Definition Fiber Optic Sensing (HD-FOS) uses optical frequency domain reflectometry to convert a standard unaltered fiber optic cable into a virtual continuous line of sensors to measure strain or temperature. A distinct measurement can be made in 1mm increments along the length of fiber. Altering the fiber with Bragg gratings in unnecessary and sensors can be constructed with standard cable. The fiber can be bonded to structures or in many cases embedded within them.

  • Survey and Mapping

    Vivax-Metrotech Corp

    The Spar employs a set of magnetic field sensors to accurately measure the 3-D offset to an underground utility and automatically combines this offset with absolute positions obtained via GNSS or other survey methods to obtain the 3-D coordinates of the utility. The Spar’s novel approach allows it to measure the 3-D offset from any vantage point within range and its built-in acceleration and magnetic sensors allow it to operate in almost any position. Moreover, it offers two distinct operating modes, line and sonde, extending its capabilities to most surveying situations.