Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 1231 - 1245 of 2267 products found.

  • Waterproof Pure+ with ATC & temp. display

    TDSTestr10 Pure+ - Thermo Scientific

    Large Display Screen - Displays mode, ATC, battery level and temperature (+ plus series models).User-Replaceable Sensor - Replace the sensors yourself. Sensor element is of SS316 stainless steel.

  • Tri-Temp Strip Level Test Instrument

    Apollon - Afore

    APOLLON is a tri-temperature strip-level test system for motion sensors. It is especially designed for high-end Automotive and Industrial applications. APOLLON offers extremely good testing conditions: high stimulus and temperature accuracy and low noise level.

  • Compact Accelerometer (Shock Meter)

    AP2019 - ZETLAB Company

    *Can be used as shock sensors in equipment diagnostic systems;*Combination of high axial sensibility, intrinsic frequency and shock resistance;*Low sensitivity to electromagnetic fields;*Low intrinsic noise level.

  • Multifunction Calibrator 15 ppm basic accuracy

    MC142 - Powertek LLC

    Multifunction calibrator MC142 is a precision voltage, current and power calibration source serving as a measurement standard in calibration laboratories and production lines; where verification of electrical measurement equipment & sensors is required. It can be used for calibration and adjustment of meters measuring voltage, current, power, resistance, capacitance and frequency. Internal harmonic and non-harmonic signals make it possible to test electrical performance of meters using signals with various crest factors. Frequency modes enable selection of frequency, amplitude and duty cycle of the output signal. These are suitable for basic calibration of digital and analog oscilloscopes along with transient recorders. The calibrator is equipped to measure temperature with TC and RTD temperature sensors. Its built-in multimeter can be used independently or simultaneously with the calibrator output. Testing of transducers of various types, regulators and sensors can be performed, without the necessity to use any other measuring instrument.

  • Online Conditioner System

    MCE-24A series - Kyowa Instruments

    PC is not includedEnable measurement in a maximum 24 channels.The system can easily be set up through the PC. Thus, it is most suitable for use with a system under online control or for configuration of a measuring system of multiple channels. Applicable sensors that depend on mounted conditioner cards include strain gages, strain-gage transducers, voltage-output sensors, AC signal-output sensors, thermocouples and piezoelectric acceleration transducers. Mount desired cards to the unit base, and you can measure different types of signals in a variety of combinations. The cards can easily be exchanged, thereby enabling users to configure an original system for each individual measurement purpose. Also, up to 20 units can be placed under the control of PC for synchronized measurement in a maximum 480 channels. Furthermore, while providing multiple channels, this conditioner system is offered at an affordable price.

  • Oxygen Gas Analyser

    Rapidox 1100 - Cambridge Sensotec

    Rapidox 1100 is the company's most cost-effective and versatile range of gas analysers. These oxygen analysers are fitted with either a zirconia or electrochemical type gas sensor. The zirconia oxygen sensor is the most common solution providing fast and accurate gas analysis over the range 1ppm to 100% O2 and is particularly suitable for aggressive industrial applications. Occasionally zirconia sensors are not suitable for the application and an electrochemical sensor is used instead. Users have a choice of two electrochemical oxygen sensors: one for low ppm measurements of 1ppm up to 1% and another for high percent measurements in the 0100% oxygen range. Electrochemical sensors are ideal for high oxygen applications or ppm applications where VOC's, flammable gases, CO, H2 or He are present in the gas sample. A special "oxygen clean" version of the high range analyser is also available.

  • Emerald 8M/12M/16M

    Teledyne e2v

    Teledyne e2v has launched its ground breaking new Emerald family of CMOS image sensors. This new product family features the world’s smallest true global shutter pixel available on the market today (2.8µm). With a smaller optical format and higher resolutions, the new sensors lead to improved performance and reduced system costs for customers.The Emerald product family is suitable for the latest generation of camera interfaces (USB3.0, USB3.1, GigE, 10GigE) due to a maximum frame rate speed of up to 110fps, full resolution at 10 bits. The Emerald sensors also incorporate High Dynamic Range (HDR) features which enable end users to benefit from an ultra-low total readout noise of typically 2 e-.

  • Protection Relay

    Arc-Flash - Selco USA, INC

    Arc-Flash Relay is a high-speed, arc-detection device for electrical power-distribution systems. The protection relay has outputs for trip coils in several zones, and has inputs for up to several optical sensors for optimal arc detection. The inputs support both point sensors and fiber-optic line sensors,which cover a larger area.Using optical sensors rather than relying strictly on current measurement allows a much faster detection time than overcurrent relays or a circuit breaker alone can typically provide, as the light from the arc is unique for the fault, whereas current pulses above the nominal level are part of normal operation for many systems.On the occurrence of an arc fault, the protection relay detects the fault and pulses the trip contact in less than one millisecond, which trips the circuit breaker(s) supplying the fault. The total arcing time is effectively reduced to the mechanical opening time of the circuit breaker, typically between 30 and 75 milliseconds. This reduces the energy of the arc fault significantly, increasing worker safety, reducing fault damage, and improving uptime. Switchgear can often be simply cleaned, inspected, and put back in service after an arc fault instead of having to be replaced.

  • Flexible Current Sensor Probe

    CTA - Powertek LLC

    The CTA current sensors convert ac current to an isolated 0-5A current with available ranges from 100A to 10,000A. Because the current sensors are flexible split core, installation is possible without shutting down the LV electrical supply, avoiding expensive down-time costs. Typical applications are retrospective energy monitoring in factories, offices buildings, process control data logging systems, where power, energy and current monitoring is important. Typical applications are factories, offices buildings, ac/dc VFD drives, welding, power conversion and power distribution. For all CTA current sensor models, a NIST/NPL (UKAS) traceable calibration certificate and certificate of conformance is supplied. All CTA sensors use UL94V0 or CSA approved materials. The CTA flexible current sensors are suited to permanent or semi permanent installation. The coil sensor is durable, lightweight, flexible and will easily clip-around a power cable. The 5A output from the CTA current sensor connects direct to installed metering, rotary metering or current transducers.

  • RF Thermistor Power Meter

    1830A - TEGAM Inc.

    Thermistor based RF power sensors are universally recognized as the most accurate means to measure and transfer RF power. Compatible with thermistor power sensors from: Agilent (HP), TEGAM, Weinschel, Hughes, General Microwave, Millitech. Supports 100 and 200 thermistors. Integrates bridge balancer and power meter into one package. Four digit calibration factor resolution. Full remote programmability. Heater control for ovenized sensors. LXI Compliant.

  • Sensor Signal Conditioning Module

    SY008 - Synectic Electronics

    The SY008-VI Sensor Signal Conditioning Module converts 0-5V dc in to 4-20mA out. The SY008 can either provide a 5V or 10V source to a variety of transducers; load cells, RVDTs, potentiometers(precision linear transducer), tilt sensors and contactless position sensors. Almost any sensor that produces an output signal voltage in the range 0-5V dc.

  • PXI Precision Resistor Module 3-Channel, 3 to 11.4M

    40-297-153 - Pickering Interfaces Ltd.

    ThisPXI Precision Resistor moduleprovides a simple solution for applications requiring accurate simulation of resistive sensors. The 40-297 series is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.

  • PXI Precision Resistor Module 9-Channel, 1 to 31.5

    40-297-110 - Pickering Interfaces Ltd.

    The 40-297 provides a simple solution for applications requiring accurate simulation of resistive sensors. The 40-297 is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.

  • PXI Precision Resistor Module 18-Channel, 1 to 31.5

    40-297-010 - Pickering Interfaces Ltd.

    This PXI precision resistor provides a simple solution for applications requiring accurate simulation of resistive sensors. The 40-297 series is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.

  • PXI Precision Resistor Module 6-Channel, 3 to 11.4M

    40-297-053 - Pickering Interfaces Ltd.

    A simple solution for applications requiring accurate simulation of resistive sensors. The series is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.