Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement


Showing results 1411 - 1425 of 2109 products found.

  • Soil Science and Soil Moisture

    Campbell Scientific, Inc.

    Products for stand-alone soil monitoring. Campbell Scientific instruments are used in a wide variety of soil-science applications. Multiple sensors can be networked in hard-wired or wireless systems to create soil-moisture profiles, while portable, hand-held systems can make point measurements to verify irrigation scheduling or to perform site surveys. Campbell soil sensor products are key to agricultural research, irrigation scheduling, forestry, watershed studies, leak detection, slope stability, and many other disciplines.

  • Torque Adaptor & Series Socket Extension Torque Sensor

    TA98 - Fine Instruments Corp.

    The Finest TA98 is a very economical torque adaptor designed to work with socket extension torque sensors on the mill volt scale of a DMM. The TA98 is especially designed for auto motive uses. - The Series TQ 800 is a very easy –to-use socket extension torque sensor that has the zero adjustment on the shaft. The series TQ800 is designed for automotive heavy-duty uses.

  • Differential Pressure Transmitter

    ABB Series - Xi'an HangSi Mechanical & Electrical Technology Co.,Ltd.

    a differential pressure transmitter with a selectable maximum working pressure of up to 41MPa, 5945psi. It is a reliable sensing system using the very latest digital technologies, providing a large turn down ratio up to 100:1. The user has a comprehensive choice of sensors, as is therefore able to optimize in-use total performance and stability. Configuration is provided via local keys combined with LCD indicator or via hand held terminal or PC configuration platform.

  • Portable Exhaust Gas Analyzer

    IMR 1440FL - IMR Environmental Equipment, Inc.

    The exhaust gas analyzer, IMR 1440FL/COFL, is designed to measure exhaust gases of Forklift Trucks that are powered by a variety of fuels. According to US regulations, the IMR 1440FL/COFL can measure soot and CO for Forklift Trucks. If state regulations require NOx, the IMR 1440FL/COFL can be equipped with a NOx sensor. The IMR 1440COFL is equipped with two CO sensors. One CO sensor operates in the low range and another CO sensor operates in the high range.

  • Pro Golf Swing Analyzer

    GSA Pro - 3Bays Corporation Ltd.

    Get the original 3Bays Pro golf swing analyzer on sale now while supplies last.The 3Bays Pro is the same size, weight and location of the 3Bays Zone and Putt, making it inconspicuous to your swing. Equipped with advance motion sensors, the 3Bays Pro digitize your swing motion and instantly delivers essential swing metrics with instant 2D swing plane playback to help beginner golfers gain the knowledge they need to improve their game, for less!

  • Flexible Current Sensor Probe

    CTA - Powertek LLC

    The CTA current sensors convert ac current to an isolated 0-5A current with available ranges from 100A to 10,000A. Because the current sensors are flexible split core, installation is possible without shutting down the LV electrical supply, avoiding expensive down-time costs. Typical applications are retrospective energy monitoring in factories, offices buildings, process control data logging systems, where power, energy and current monitoring is important. Typical applications are factories, offices buildings, ac/dc VFD drives, welding, power conversion and power distribution. For all CTA current sensor models, a NIST/NPL (UKAS) traceable calibration certificate and certificate of conformance is supplied. All CTA sensors use UL94V0 or CSA approved materials. The CTA flexible current sensors are suited to permanent or semi permanent installation. The coil sensor is durable, lightweight, flexible and will easily clip-around a power cable. The 5A output from the CTA current sensor connects direct to installed metering, rotary metering or current transducers.

  • Multi-Sensor Systems

    Inframet

    Multi- sensor surveillance systems represent a fast growing group of electro-optical systems of critical importance in both defense and civilian applications. At the same time they are the most expensive groups of electro-optical systems. Most advanced but rarely met multi-sensor surveillance systems are built from a long series of sensors like thermal imager (or two thermal imagers, color VIS camera, low light VIS-NIR camera, SWIR camera, laser range finder, laser designator, laser pointer, illuminator located on a stabilized platform and such systems. Simpler systems built from two-three sensors located on smaller stabilized or non-stabilized platforms are more common.

  • Counters and Timers

    Orbit Controls AG

    Counters and Timers from Orbit Controls are designed for a direct connection to nearly all industrial sensors and pulse sources. They can operate as process monitors to display the input signals, or as process controllers with control outputs. The counters measure and display frequen frequencies or pulses from single sources, quadrature sensors or absolute coded Gray or binary resolvers. Apart of the calculated display the counters generate analog outputs, serial or parallel data ports and control set points. The parameters are entered via the keyboard in order to display the process in the required units and optimize the serial data, the analog outputs and the set points.

  • Instrumentation and Signal Conditioners

    Stellar Technology Inc.

    Stellar Technology provides a selection of DIN-rail mount signal conditioners and In-line signal conditioners to compliment our millivolt-per-volt output load cells, force sensors, reaction torque transducers and AC/AC LVDTs. These products provide valuable complementary solutions for those applications requiring high level analog outputs and where the sensor(s) are exposed to conditions detrimental to internal signal conditioning or the required sensor configuration will not accommodate an internal amplifier. Together with Stellar Technology sensors and connector and cable assembly, Precision Digital readout instrumentation, these signal conditioners provide our customers with a complete measurement system solution.

  • Device Current Waveform Analyzers

    Keysight Technologies

    The dedicated Current Sensors measure from 100 pA level dynamic current up to 10 A with a maximum of 200 MHz bandwidth. The mainframe acquires the signal from the sensors by a maximum of 1 GSa/s sampling speed and 14-bit and 16-bit wide dynamic range. This combination allows you to measure quite wide range of dynamic current, for example, from standby/sleep state to active state, at a single measurement. In addition, the wide bandwidth and the high speed acquisition enable you to measure high speed pulse response even less than 100 ns previously very difficult with existing instruments.

  • WZZARD CONDITION BASED MONITORING KIT, CELL GW, VIB SENSOR

    WSKIT3BC-CBM-V - B+B SmartWorx

    The bundle provides everything you need: the sensors (including vibration), the wireless nodes, and the Cellular network gateway.Embedded magnets make mounting fast and easy.Robust network security and VPN tunneling capable.Wide temperature specifications and a rugged, outdoor-rated, industrial design.Wzzard nodes automatically create an alternate path to the network gateway if a node is disconnected. Individual nodes don’t need to be within direct range of the network gateway. They can route their data across fellow nodes.Up to 32 Wzzard Nodes and 96 individual sensors can be deployed in a single mesh network.Range is up to 100 meters indoors and up to 500 meters outdoors.

  • Wzzard™ Energy Monitoring Kit

    WSKIT3BE-NRG - B+B SmartWorx

    The bundle provides everything you need: the sensors, the wireless nodes, and the network gateway.Embedded magnets make mounting fast and easy.Robust network security and VPN tunneling capable.Wide temperature specifications and a rugged, outdoor-rated, industrial design.Wzzard nodes automatically create an alternate path to the network gateway if a node is disconnected. Individual nodes don’t need to be within direct range of the network gateway. They can route their data across fellow nodes.Up to 32 Wzzard Nodes and 96 individual sensors can be deployed in a single mesh network.Range is up to 100 meters indoors and up to 500 meters outdoors.

  • WZZARD ENERGY MONITORING KIT, 3 NODE, CELL GW

    WSKIT3BC-NRG - B+B SmartWorx

    The bundle provides everything you need: the sensors, the wireless nodes, and the Cellular network gateway.Embedded magnets make mounting fast and easy.Robust network security and VPN tunneling capable.Wide temperature specifications and a rugged, outdoor-rated, industrial design.Wzzard nodes automatically create an alternate path to the network gateway if a node is disconnected. Individual nodes don’t need to be within direct range of the network gateway. They can route their data across fellow nodes.Up to 32 Wzzard Nodes and 96 individual sensors can be deployed in a single mesh network.Range is up to 100 meters indoors and up to 500 meters outdoors.

  • Wzzard Machine Condition Monitoring Application Bundle

    WSKIT3BE-CBM - B+B SmartWorx

    The bundle provides everything you need: the sensors, the wireless nodes, and the network gateway.Embedded magnets make mounting fast and easy.Low maintenance, multiyear operation on battery power. (2) AA lithium batteries are included.Wide temperature specifications and a rugged, outdoor-rated, industrial design.Remote diagnostics, automatic restart, hardware watchdog.Wireless mesh networks provide “five nines” (99.999 percent) uptime.Wzzard Intelligent Edge Nodes form self-healing wireless mesh networks.Up to 32 Wzzard Nodes and 96 individual sensors can be deployed in a single mesh network.Range is up to 100 meters indoors and up to 500 meters outdoors.

  • Modbus Data Logger

    Ajinkya Electronic Systems

    Modbus is a popular protocol that is used by manufacturers of instruments and sensors. Site instrumentation already exists and parameters to be recorded are available on Modbus Data Logger. We have in store fro our clients Modbus Data Logger that can read data from these instruments and record them periodically. These loggers are configured as per the site requirements. Though basic operation of any data logger is to record the values of process parameters. However it is important that recorded data is presented to the user in timely and prescribed manner. Also any discrepancies in the readings are conveyed to the operator in the fastest manner for quick action.