Filter Results By:
Products
Applications
Manufacturers
Sorters
A physical piece of equipment or a software program with the sole purpose to segregate items into groups according to a specified criterion. (www.cogsci.princeton)
-
product
Sorters
Spartan™
The unified wafer management system gives the Spartan™ Sorter the minimum scale and complexity required to accomplish its core job – to move wafers as cleanly and as quickly as possible. The Spartan Sorter offers improved reliability and maximized efficiency, while delivering industry-leading cleanliness with the lowest particle levels.
-
product
Sorter
IV-200I
IV-200I is a sorter for package in pocket tape that features a lot summary information. This product is used for mapping data with Defect Code Data/Report as well as exporting data or report archiving. IV-200I works well with an In.D X-ray Image Analyser.
-
product
Wire Sorter
Shanghai Beha Electronics Co., Ltd.
*Standard signal transmitter identifies up to 12 lines*Clear indication of short circuits, open circuits, or interruptions*Integrated continuity tester
-
product
MPI Sorter Series
MPI LED Mapping Sorter Series
MPI proudly presents the LED Mapping Sorter Series designed using a modular architecture with unsurpassed flexibility allowing every system to meeting each customer’s precise requirements. Utilizing advanced Pick & Place sorting process technology, the MPI LED Mapping Sorters deliver high speed die sorting cycle times of 55msec/chip or less. The Mapping Sorter series feature extra-large sorting area (8”) and bin area (140mm X 140mm) with a unique four-sorting arm design enhancing both the production efficiency and high-volume throughput.
-
product
MPI Sorter Series
MPI’s Sorter Series are improving production efficiency and yields for market sectors related to LED chip, package production, discrete device handling, and IC substrate manufacturing. Deploying MPI’s Pick & Place technology, the Sorter Line offers dedicated sorting and defect inspection solutions particularly suited for GaN, GaAs, Vertical LED Chip, Flip Chip, and Laser Diode applications. With a proven heritage of and market-advanced technologies, MPI offers competitive and differentiated solutions that are scalable and cost-effective.
-
product
200mm Wafer Sorter
SortMax200™
Achieve exceptional performance with Genmark's SortMax200™ wafer sorter, designed for handling wafers up to 200mm. The SortMax200™ can be configured to accommodate a maximum number of eight open cassette stations.
-
product
Wafer Sorter and Inspection
SolarWIS Platform
Eliminating the opportunity for problematic wafers to enter cell manufacturing lines greatly improves output and yield. ASM AE’s wafer sorter features 3D area inspection capability to inspect wafer thickness, total thickness variation (TTV), saw marks, as well as wafer bow and warpage. SolarWIS also includes modules that can inspect for stain, geometry, micro-cracks, edge chips, resistivity, P or N conductivity and lifetime.
-
product
Die Sorter Handler
4605-HTR
4605-HTR is a MAP Sorter which picks up devices from wafer ring and sorts to tape or bin according to the MAP file created by film frame test handler or prober. 4605-HTR is a high speed handling system, available for 12 inches wafer rings. When used in combination with 4170-IH, 4605-HTR much improves efficiency in testing process of leadless devices as a high speed sorting machine.
-
product
Metal Material Sorter
Xiamen IDEA Electronic Technology Co., Ltd.
1. Eddy Current sorting 2 welding inspection equipmentand Eddy Current Testing Instrument 3.Automatically record and display
-
product
Stand Alone Wafer Sorter
MicroSORT
The Microtronic MicroSORT semiconductor wafer sorter is designed to maximize throughput while minimizing wafer handling in a user-friendly operating environment. This stand-alone semiconductor wafer sorter enables sophisticated semiconductor wafer sorter routines for up to 4 wafer-cassette platforms. MicroSORT semiconductor wafer sorter reads OCR scribes from the top, bottom, or simultaneously, allowing for enhanced semiconductor wafer tracking and sorting. The MicroSORT semiconductor wafer sorter’s basic functions include the ability to move, compress, randomize, find, align, verify, and split semiconductor wafer lots. With our virtual tweezer mode, an operator can click on wafer icons to move wafers between cassettes, read semiconductor wafers, and swap wafer positions.
-
product
Stocker, Sorter and Metrology System
CODEX™
Genmark Automation’s CODEX™ Stocker is the industry’s first integrated stocker, sorter and metrology system that has the ability to store, track, and deliver, on demand, multiple substrate types along with their key attributes. Consolidating the functions of these traditionally nonrevenue-generating tools frees up fab floor space for production equipment, enabling a facility to maximize its productivity and yield.
-
product
Densigrader: Dynamic Weight Sorter
The Densigrader: Dynamic Weight Sorter is made for on-line mass/density measurements and sorting of green lumber prior to drying. The accurate mass and optional volumetric measurements provide an increase in grade recovery and kiln productivity. Its small footprint fits easily into most transverse, lugged transfer chains. System employs either RS232 or TCP/IP protocols to hand off data to sorting PLC.
-
product
Autocompute LCR-Q Meter Sorter
Model 4912 / 4912PR
- Microprocessor based Fully Automatic L, C, R, Q and D measurement- Autoranging with Direct Digital Readout- 4 Terminal Measurement Technique- No Tuning or Balancing- Series or Parallel Equivalent Measurement- Absolute Value and Nominal Value with Percentage Tolerance- Single / Multiple Parameters Check During Component Sorting- Feather Touch Keys with Audio Feedback- Thermal Shut Down for Overheat Protection- Special Mechanism for Fast and Easy Insertion and Removal of Test Component- Low Cost and Portable- Component Sorting on Absolute or Nominal Value Basis with a Percentage Tolerance- Aplab Model 4912PR is Remote Programmable Auto Compute LCR-Q Meter Sorter, Which can be Programmed through GPIB, RS232 or SPIB Interface
-
product
High Throughput Wafer Sorter
SortMax300 HT™
Genmark’s SortMax300 HT™ is capable of achieving the highest wafer per hour throughput requirements while operating under strict reliability and cleanliness specifications. Based on modular design it can support configurations up to 8 FOUP/FOSB stations. Highest throughput capacity is a result of expanded technological features including uniquely designed dual end-effector wafer transfer mechanisms based on Genmark’s proven GREX dual arm robot series.
-
product
0-10V Battery Voltage Sorter Tester
TOB-0918
Xiamen Tob New Energy Technology Co., Ltd
0-10V Battery Voltage Sorter Tester With Battery Low/High Voltage Alarm For All Kinds Of Batteries. TOB-0918 Battery voltage tester is a Voltage sorter with single-chip control of portable test instrument, This voltage tester is with a voltage limit set and automatic judging function, we can set the voltage in the range or out the range alarm function.
-
product
Inline OEM High Resolution Thickness & Resistivity Module for PV / Solar Sorters
MX 152
To allow three thickness scans during belt transport at different wafer sizes, two measuring bars, one from top and one from bottom, hold 3 sensors each.
-
product
Wafer Thickness, TTV, Bow and Warpage
ALTO-TTV FAMILY OFFERS THE SPEEDY MEASUREMENT OF WAFER GEOMETRY PARAMETER, MORE IMPORTANTLY, WE CAN AUTOMATE THE TOOL TO HANDLE FROM THIN WAFERS TO PERFORATED, WARPED, BUMPED, AND TAPE-FRAMED WAFERS. OPTIONAL SORTER AND SHIPPING JAR UNPACKING FUNCTION AVAILABLE.
-
product
Flow Cytometers
Get better, brighter, and faster flow cytometry results with our range of innovative instruments and reagents. Including the powerful, versatile and automation ready ZE5 Cell Analyzer, the compact S3e Cell Sorter and our ever-expanding flow cytometry antibody library.
-
product
Customized Semiconductor Wafer Inspection, Sorting & Metrology Equipment | Systems
Customized Solutions
Unique Needs? Need better wafer inspection throughput, accuracy, versatility? Need a wafer defect inspection expert who’s not a sales person? We’ve been providing complete semiconductor wafer inspection, sorter, and microscopes solutions to semiconductor wafer manufacturers since 1994.
-
product
Wafer Sorting System
SortMax300™
Genmark's SortMax300™ is a next generation SORTER producing the highest throughput rapid software set-up and lowest cost-of-ownership culminating from 25 years' experience in design, development, and manufacture of wafer handling equipment.High throughput is achieved using Genmark’s high precision robots, including the robot series featuring the patented GPR technology robots enabling automatic compliant interaction with misaligned process modules and capable of deflection compensation during transport of high payloads.
-
product
AMIDA 5000 Tester
AMIDA 5000 is a high-end performance test system, combining analog, mixed-signal and logic with the latest test solutions. High pin count - as many as 512 smart multi-function pinframes and 128 sites. Ability to provide cost-optimized test solutions for a variety of consumer components in power management and mobile device components. This system has a higher number of parallel tests and a higher level of capability. This series of test systems provides a powerful test combination with high-speed hardware and software integration. The 5000 series test system is the best analog, mixed signal, digital IC, PA test system for engineering verification and mass production. It can be easily connected to all well-known wafer probing machines and sorters, and also supports parallel test functions. The 5000 series meets customers' needs for high-precision, high-resolution, high-reliability, user-friendly, and low-cost testing and measurement of test systems.