Filter Results By:

Products

Applications

Manufacturers

Sound

tympanum, bioacoustic sensed pressure waves.

See Also: Ultrasound, Audio, Infrasound, Reverberation, Acoustic, Sound Calibration


Showing recent results 391 - 405 of 565 products found.

  • Digital Clamp Meter

    M266 series - Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD

    M266 · DC Voltage: 1000V ± 0.8% · AC Voltage: 750V ??.2% · AC Current: 200 - 600A ±2.0%, 600 ~ 1000A ±3.0% · Resistance: 200Ω, 20KΩ±1.0% · Continuity check: Built in buzzer will sound · Data hold · Display: LCD size 15 x 47 mm · Dimension: 70 x 230 x 37mm · Weight: 310g M266A · DC Voltage: 2 / 20 / 200V ± 0.5%, 1000V ± 0.8%· AC Voltage: 200V ± 1.0% 750 ± 1.2%· AC Current: 200 ~ 600A ± 2.0%, 600 ~ 1000A ± 3.0%· Resistance: 200Ω, 20KΩ, 2MΩ ± 1.0%· Frequency: 2KHz±3%· Diode Test: Check forward or reverse· Continuity check: Built in buzzer will sound· Peak hold     (Special function) · Display: LCD size 15 x 47 mm· Dimension: 70 x 230 x 37mm· Weight: 310g

  • Turnkey Solution for Unattended Noise Monitoring

    NoiseScout - NTi Audio AG

    NoiseScout provides a comprehensive but easy-to-use 24/7 noise monitoring solution. Noise levels are recorded on-site by the XL2 Sound Level Meter and are available online for monitoring and download. NoiseScout is aimed at both short term noise assessments and long term monitoring applications. During acquisition, automated email alerts allow noise issues to be addressed before a non-compliance condition arises. NoiseScout displays the noise levels measured by the XL2 Sound Level Meter live in your web browser. The measurement data recorded out in the field is presented online in charts and dashboards. Multiple noise level meters can be monitored simultaneously within the map view, thus providing localized geographic visualization for all noise levels at a glance. Identified users can access all their projects, control their monitors or create basic view modes, allowing stakeholders to oversee their noise level data.

  • The Leading Measurement System for the Analysis of Porous Materials

    ELWIS - Autoneum Holding AG

    ELWIS (Evaluation of Light Weight Impedance System) offers a full and rapid characterization of porous materials based on the analysis of a single sample. The ELWIS system consists of the ELWIS-A and ELWIS-S components which can be used independently from each other although both applications are needed for a complete material simulation.ELWIS-A measures acoustic parameters that are needed to evaluate the acoustic performance of sound insulation and sound-absorbing multi-layer materials. An additional impedance tube for absorption measurements at higher frequencies is available for ELWIS-A.ELWIS-S measures structural parameters that are needed to simulate the dynamic and acoustic behavior of sound packages in the medium to low frequency range (including the "Poisson Ratio" for foam materials).ELWIS is very easy to operate: Thanks to its user-friendly software, the system can also be used to obtain reliable results by users with only limited experience in the characterization of porous materials.

  • Audio Analysis System

    IE-45 - Ivie Technologies

    is a completely new, calibrated, handheld audio instrument delivering a broad range of acoustical measurements. A vivid color display imparts more information to the customer.. In-the-field functions include real time analyzer measurements (RTA), sound pressure level (SPL) measurements, seat-to-seat level variation measurements, strip chart recordings of sound level over time, polarity checking, audio frequency oscilloscope measurements, Noise Criteria (NC/NR) measurements, a built-in signal generator, audio level volt meter, Spectrograph, and more. Optional RT60, STI-PA, LEQ, Record, and other measurements and functions now available.

  • Apps

    ELAC Technische Software GmbH

    The web app is intended for websites of manufacturers of room acoustic products. Visitors to this page can not be used for this purpose. A PDF document.The app for mobile devices is the ideal tool for technical sales. Individual rooms can be grouped into projects, saved and later processed.With the largest range of functions, the app meets the requirements of professional planners for Windows computers . If, for example, a measurement of the reverberation time is available, then it can be planned on the basis of it. The manufacturer-independent sound absorber database can be supplemented by its own products. Calculation results can be exported in the form of a

  • Audio Analyser

    ATB PC Pro - Kirchner Elektronik

    The ATB PC Pro Measuring system is a professional Audio Analyser. The Windows program is combined with the computer’s soundcard, the measurement microphone, the Test-Box and the DVD (CD) for the signals forms an exact and extensive measurement system. The applications for the ATB PC Pro are the speaker development, room acoustic optimise, the installation of car sound systems, the setting of Surround reproduction systems and the noise analyser.

  • Audio Analysis

    Meilhaus Electronic GmbH

    The MCD AudioAnalyzer is used to test and calibrate analog and digital sound systems, or it can be used to convert analogue audio signals into digital form and vice versa. Also, the conversion of optical to electrical S / PDIF signals and vice versa can be done. The MCD AudioAnalyzer combines software (Toolmonitor MCD AudioAnalyzer) and hardware for the analysis and generation of analog and digital signals in the audio area.

  • Audio Monitor

    TouchMonitor TM7 - RTW GmbH & Co. KG

    A major enhancement is the possibility to measure and to display signals of the 7.1 DD+ surround format. Beside the display with classic PPM instrument, the signal is available for loudness measurements according to all relevant loudness standards. In addition, RTW's Surround Sound Analyzer has been expanded to display the balance and the subjective impression of the 7.1 DD+ format at a glance in a very clear graphical overview.

  • Audio Monitors

    TouchMonitor TM9 - RTW GmbH & Co. KG

    A major enhancement is the possibility to measure and to display signals of the 7.1 DD+ surround format. Beside the display with classic PPM instrument, the signal is available for loudness measurements according to all relevant loudness standards. In addition, RTW's Surround Sound Analyzer has been expanded to display the balance and the subjective impression of the 7.1 DD+ format at a glance in a very clear graphical overview.

  • Bimorph Type Vibrators

    Fuji Ceramics Corporation

    Bimorph type vibrator has bonded the two piezoceramic elements. If one element is extends in the longitudinal direction, the other elements are configured to compressed. This will be the flexural vibrators. Conversely, when apply flexural force outputs an electric field corresponding to the force. Many, it has a natural frequency of the auditory area. For this reason, it is used as a highly sensitive sound sensors or bending actuator of ON-OFF drives,.

  • Bioacoustic Analysis Software

    Kaleidoscope - Wildlife Acoustics, Inc.

    Kaleidoscope powers through all of your recordings, creating groups of similar sounds called clusters, which significantly reduce analysis time. In addition, its sophisticated spectrogram and audio tools let you quickly verify and label your data.Designed by software engineers and tailored to bat biologists' research needs, Kaleidoscope is an integrated suite of bat data tools designed to help you quickly convert files, sort and categorize bat data by species, verify your findings, visualize your work and easily transform it into reports.

  • Bluetooth Activity Monitor

    BluetoothView v1.66 - NirSoft

    BluetoothView is a small utility that runs in the background, and monitor the activity of Bluetooth devices around you. For each detected Bluetooth device, it displays the following information: Device Name, Bluetooth Address, Major Device Type, Minor Device Type, First Detection Time, Last Detection Time, and more. BluetoothView can also notify you when a new Bluetooth device is detected, by displaying a balloon in your taskbar or by playing a small beep sound.

  • AC /DC withstand voltage tester

    2672C - Shenzhen Chuangxin Instruments Co., Ltd.

    High voltage, large current, high accuracy.Leakage current, testing time, continuous arbitrarily, well-adapted.Synchronized display measuring value( time, voltage and current).Can choose manual or remote control testHigh voltage breakdown protection, sound and light alarm, safe and reliable Easy operation, suitable for use in production lineDC output can test small capacitance, high-voltage silicon stack, reverse voltage of transistors

  • AC/DC withstand voltage tester

    2671A - Shenzhen Chuangxin Instruments Co., Ltd.

    High voltage, large current, high accuracy.Leakage current, testing time, continuous arbitrarily, well-adapted.Synchronized display measuring value( time, voltage and current).Can choose manual or remote control testHigh voltage breakdown protection, sound and light alarm, safe and reliable Easy operation, suitable for use in production lineDC output can test small capacitance, high-voltage silicon stack, reverse voltage of transistors

  • Acoustic Control System

    M+P International

    m+p VibControl performs acoustic testing in reverberation chambers and direct field environments as well as progressive wave tube testing. It is a fully automatic digital control system, providing fast, accurate and repeatable control of high-level noise to a reference octave band spectrum and the overall sound pressure level (OASPL). The control guarantees a high level of product safety.