Filter Results By:

Products

Applications

Manufacturers

Sound

tympanum, bioacoustic sensed pressure waves.

See Also: Ultrasound, Audio, Infrasound, Reverberation, Acoustic, Sound Calibration


Showing recent results 496 - 510 of 573 products found.

  • Cable Tracer and Phone Tester

    183 CB - Standard Electric Works Co., Ltd

    Cable Tracer ● Trace wires or cables.● Volume control.● Tip & Ring identification.● 2 bi-colored LEDs ( Line 1 & Line 2).● Tone speed selection : Fast & Slow.● A phone jack is designed for headset or handset. (Amplifier probe)Phone Tester● Continuity and resistance testing for voltage-free objects.● Check direct and alternating voltages.● Testing capacitors.● Testing diodes.● Power ON/OFF switch.● The indication of the LED lamp and the sound of the buzzer can occur at the same time.● The LED indication for Power ON status.

  • CORRELATORS

    C-3 - SebaKMT

    The Correlux C-3 correlator locates leaks in drinking water pipes. Pressurized water at the leak location creates a noise which travels out in all directions of the pipe.This noise is recorded, amplified and sent wirelessly to the correlator by two sensors (piezo microphone, hydrophone) which are attached to the pipe (e.g. valve, hydrants).The Correlux C-3 compares both signals (correlation) and calculates the exact distance to the leakage on the basis of the delay time of the signals, the sensor distance and the sound velocity in the pipe.

  • Digital Ultrasonic Maintenance System

    VPE-2000 - Superior Signal Company

    The Superior AccuTrak VPE-2000 is the first digitally controlled ultrasonic detector. Like two instruments in one it uses two independent sensors supported by separate electronic circuits configured specifically to their own sensor. This assures optimum sound clarity and frequency response. When switching between the airborne and contact sensors all settings are retained in memory! Digital LED meters let you establish baselines, perform trending, and accurately repeat these tests better than older more expensive analog instruments.

  • H.V. Proximity Detector

    275 HP - Standard Electric Works Co., Ltd

    ● 8 voltage settings: 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV, 132kV, and 275kV.● High bright LED visual indication.● Sound indication.● Easy-to-prove method.● Self-test selection.● Use 3 × 1.5V “C” batteries.● High impact nylon casing.● Non-contact work by proximity.● Compatible with most link sticks.● Lightweight, robust, & compact.● Suitable for indoor and outdoor use.● Detects low voltage on any systems.● Easy access to batteries.● No special parts needed.

  • Infrared cameras

    IRDL708 Series - Amperis sl

    IRDL708 Series is newly developed uncooled thermal imaging camera, which features high resolution 640x480 pixels, multi rotated big size touch screen, IR & CCD fusion, 5 mega pixel CCD camera, high brightness LED light, record in H.264 or original data, JPEG format picture back up, sounds & light alarm, text and voice noted, network interface, built in laser, Bluetooth, WIFI, GPS etc.

  • Light Meter for iPhone

    Lumu Power - Lumu Labs

    Accurate exposure is essential to the nature of image making. Lumu features state-of-the-art digital light sensor for unquestionable measurements. Its advanced self-calibrated photodiode array emulates human eye response. Additional features such as IR light rejection and temperature compensation make it most advanced illuminance sensor on the market. Lumu doesn’t have battery, it gets electricity out of the sound. With its low power consumption, Lumu will require less battery as listening to the music on your headphones.

  • Master Clock Distripalyzer

    DCD-8 - Brainstorm Electronics Inc.

    With the proliferation of digital equipment, it is becoming increasingly difficult to keep everything synchronized and locked. Carrying on in the tradition of the Brainstorm Distripalyzer, the DCD-8, with 10 inputs and 17 outputs, is the perfect solution! Offering not only exceptional stability but also remarkable flexibility, the DCD-8 is ideal for most situations, whether you have a small sound studio or a large post-production facility with NTSC, PAL or HD systems. Clock generating, distributing, clean up, analyzing, format converting, it does it all for a very affordable price.

  • Noise Monitoring Kit

    NMS044 SoundAdvisor - Larson Davis, Inc.

    Larson Davis has created a new standard for portable noise monitoring systems by making the SoundAdvisor Kit Model NMS044 completely wireless with solar charging and 4G wireless while keeping it truly portable. The SoundAdvisor noise monitor includes everything needed for a noise monitor (powered by SoundAdvisor Model 831C Class 1 sound level meter) that can run indefinitely while remaining connected to the Internet making your meter and your data always readily available.

  • Sensor Solutions for IoT

    imec

    Imec is a reference in the design of ultra-low power electronics, low-power algorithms to increase intelligence and data security, and in all aspects of data science. Our multi-sensor environmental monitoring platform features sensors for temperature, relative humidity, NO2, CO2, VOC (volatile organic compounds), particle matter, ambient light, sound, vibrations and presence detection. Our test platform is suitable for indoor and outdoor air quality monitoring and control, and can be used in smart buildings, smart cities and more.

  • Software

    Blaze - Larson Davis, Inc.

    Blaze software is the ideal data analysis and reporting tool for Industrial Hygiene and Safety professionals. From simple, concise compliance reports to powerful detailed data presentations, Blaze excels in supporting various exposure sampling methods and interfaces with the Spark family of personal Noise Dosimeters, the SoundTrack LxT Sound Level Meter and the HVM100 Human Vibration Meter. From instrument setup to presentation-ready reports to exposure record management, Blaze makes noise and vibration exposure monitoring more convenient and productive

  • Wire Harness Tester

    NX Pro - Dynalab Test Systems, Inc.

    The Dynalab NX Pro Wire Harness Tester is a low-cost, feature-packed, stand-alone continuity tester with a maximum capability of 512 test points. The flexibility of the NX System allows each program to perform multiple tests, display custom messages or sounds, and analyze the results of a test or an input to "decide" which operation to perform next. The NX Pro Tester has 1.3Mb memory capacity for program storage and is compatible with Printers, Scanners, and all other Dynalab NX System accessories.

  • Amplifiers

    TOA Electronics, Inc.

    Amplifier is designed to be used in conjunction with optional modules and can be confiugured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The more appropriate modules can be selected depending on applications. Since it comes with two 60W power amplifiers, it can individually perform multi-origin braodcasts. It is equipped with singnal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.

  • Bioacoustic Analysis Software

    Kaleidoscope - Wildlife Acoustics, Inc.

    Kaleidoscope powers through all of your recordings, creating groups of similar sounds called clusters, which significantly reduce analysis time. In addition, its sophisticated spectrogram and audio tools let you quickly verify and label your data.Designed by software engineers and tailored to bat biologists' research needs, Kaleidoscope is an integrated suite of bat data tools designed to help you quickly convert files, sort and categorize bat data by species, verify your findings, visualize your work and easily transform it into reports.

  • Hearing Aid Test System

    FONIX 8000 - Frye Electronics, Inc

    The FONIX 8000 is the world’s most advanced hearing aid test system, featuring the unique Polar Plot Sound Chamber, capable of performing automatic polar plot measurements of directional hearing aids. Although the results are not a replacement for laboratory testing using an anechoic chamber, the 8120 Polar Plot chamber provides the hearing health professional with a clinical tool for verifying approximate directionality characteristics of the hearing aid. As directional hearing aids continue to grow in popularity, this feature has become essential in the modern hearing aid clinic.

  • Hi Pot Meters

    Bierer & Associates, Inc

    The HI Pot Device is designed to Hi Pot de-energized 15kV class cables. The tool transforms 18 Volts from the battery to approximately 8,000 volts DC. When the battery is installed and the safety switch is in the closed down position, the unit is in voltage detection mode. The unit should be in this position when installing the device, as it will sound a warning alarm if you approach an energized source. When the safety switch is lifted and the toggle switch is switched up, the unit is in the Hi-Pot mode and the high voltage DC is being applied.