Filter Results By:

Products

Applications

Manufacturers

Sources

The origin.


Showing results: 2071 - 2085 of 2938 items found.

  • Solution for Modern Data Acquisition

    Universal Encoder II - Seismic Source Co.

    The Universal Encoder II is the cutting edge solution for modern data acquisition. This encoder will initiate, fire, trigger or monitor any seismic source, and pass these events to any seismic recording system. It uses GPS information for unmatched timing precision. For hybrid crews, multiple UE-IIs can be used to synchronize multiple recording systems.

  • 18V/3A Single Output DC Power Supply

    Extech 382202 - Extech Instruments Corporation

    The 382202 is a DC power supply which provides an adjustable 0 to 30 Volts and 0 to 1 Amp output. Features dual backlit LCD display for current and voltage, short circuit and overload protection. Operates from 120VAC ±10%/60Hz power source. Banana plug outputs. Complete with power cord.

  • Universal relay test set and commissioning tool

    CMC 356 - OMICRON electronics

    The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands.

  • PXI Analog Output

    Pickering Interfaces Ltd.

    Our range of flexible PXI Analog Output modules features high accuracy & high resolution voltage and current sources that satisfy a wide variety of applications in Automated Test, including sensor and transducer simulation. Each product has a number of variants with differing channel counts to closely match a user’s specific requirements.

  • Signal Amplifier

    A10160 - Tabor Electronics Ltd.

    Model A10160 is an ultra-small footprint, wideband, DC coupled amplifier designed for high frequency, high current, signal amplification. With a high bandwidth of 45MHz, 34Vp-p into 50 ohms and up to 10W output power, the A10160 is the ideal complimentary amplifier to any signal source that needs a supporting power boost for demanding applications.

  • EMF Measurements/EM Measurements/Electromagnetic Radiation

    Holland Shielding Systems B.V.

    Electromagnetic fields cause interference in electronic devices and may affect the health of people close to where the fields are generated. It is important to recognize this at an early stage in a construction process, for instance at a future construction location or while construction is already underway, so that budgets are not exceeded. By means of field-strength measurements one can chart the existing electromagnetic fields and radiation emitted by GSM, UMTS antennas and transformer spaces, to mention a few examples. These measurements can help determine the best location in the new building for rooms where sensitive measurements are to take place, e.g. in hospitals or nano laboratories. And last but not least, field-strength measurements can detect sources of interference and can be part of a scheduled check of existing screened spaces and Faraday cages.

  • Integrating Sphere With Holder Base

    IS-*MA - Lisun Electronics Inc.

    1. The hold base can bear max 20kg, it can expanding to test all lamps such as E27/E40, all tubes such as T5/T8/T12, and all kinds of luminaries2. The hold base can be installed in the ceiling or down, it can be adjusted the height3. Hold base has four power cables connect to the outside Power Supply and max is 5KW4. The holder base is detachable. For some kinds of light sources you may need to change the position of the holder base.5. Diameter: IS-0.3M (0.3m), IS-0.5M (0.5m), IS-1.0MA (1.0m), IS-1.5MA (1.5m), IS-1.75MA (1.75m), IS-2.0MA (2.0m). Other sizes can be designed according to the customer’s request.6. The painting of integrating spheres is according to CIE Pub. No.84 (1989)

  • Precision Current Loop Calibrator With Hart Communications

    LC-110H - Martel Calibrators

    The Martel LC-110 and LC-110H are mA (loop) calibrators designed to take the loop calibrator class to the next level. The new LC-110 series feature a user friendly interface with dedicated buttons and a rotary encoder (Quick-Set Knob). This combination drastically reduces the time it takes to measure, simulate, or source both voltage and current and power up a loop. The rugged ABS plastic case is contoured to easily fit a technician's hand and the large back lit graphics LCD is best in class. The LC-110H differs from the standard LC-110 in that it incorporates HART communications and supports a select set of the HART universal and common practice commands. This unique feature allows the LC-110H to be used as both a loop calibrator and communication tool.

  • SoapUI

    API Testing - Worksoft

    Certify enables users to test APIs and leverage virtual services via an integration with SmartBear’s SoapUI. An out-of-the-box (OOTB) interface can point Certify processes to a SoapUI project, start a virtual service, and run a test or suite of tests. Data can be passed via our interface from Certify into a SoapUI test, and response data in SoapUI can be passed back to Certify once the test completes. This two-way integration enables teams to leverage existing SoapUI tests, eliminating the need to rebuild API tests. This makes it possible for business analysts or QA teams authoring tests in Certify to leverage assets built in open source technology as part of an end-to-end business process versus recreating them.

  • spectrometers

    ASC-5216 - Avantes Inc.

    The ASC-5216 is the smallest OEM electronics board Avantes offers. It can be used with the Sony (ILX511, ILX554B) and Toshiba (TCD-1304) CCD detectors. Featuring the same powerful 5126 Coldfire processor as used in the AS-5216, it's equipped with a Hirose ST60-36p connector. It has 12 programmable IO ports (3 DI, 9 DO), 2 analog out ports and 2 analog in ports. One digital out port is used for controlling the flash rate of an external Xenon strobe (AvaLight-XE), one digital out port is used to control external TTL-shutter devices, one digital output is reserved for external control for flashing a laser source in LIBS applications. One digital in is used for external hardware triggering.

  • External Pre-amplifiers

    Spectrum Instrumentation

    Although all Spectrum A/D cards have a very powerful input section with a highly configurable input amplifier and a variety of input ranges it is sometimes necessary to have additional external amplifiers if the signal to acquire has an extremely low level. Spectrum offers a range of perfectly matching external amplifiers to cover such cases. These powerful amplifiers have been rated using the Spectrum cards and offer best performance together with high amplification rates.The amplifiers are simply connected between the signal source and the Spectrum A/D card input and can be manually switched between different settings using small lever keys. All amplifiers allow the offset compensation by using an adjustable screw.

  • Haze Meters

    Labfon Equipment Inc.

    Haze meters are referred to as a haze and transmittance measurement machines. They perform both vertical and horizontal sample measurements. Features open measurement area; there's no limit on sample size. It uses different light sources sort of A, C, D65 to quantify haze and transmittance of the test sample. Designed in accordance with ASTM, ISO international standards.

  • Pulsed Fiber Amplifier

    MOPA - Fibotec Fiberoptics GmbH

    These light sources are compact Master Oscillator Power Amplifier (MOPA) assemblies that can be directly modulated in a fixed range of repetitive frequency and pulse power. The standard products operate in the wavelength range around 1.5 μm at a repetition frequency> 6 kHz and with a pulse energy of 10 μJ / 50 ns (200 W peak power).

  • Partial Discharge Measurement System

    DAC-6021 - Soken Electric Co. Ltd

    DAC-6021 is a measurement system for testing Partial Discharge of high frequency equipment, power devices, stator coils, etc.Since the system combines Partial Discharge Measuring Instrument (DAC-PD-3) with Testing Corona-free Variable Frequency Voltage Source (DAC-WT-50) and Testing Shielded Chamber, most external noises are removed, and the measurement is safe.

  • RF Wireless Testing

    National Technical Systems

    NTS conducts wireless RF regulatory testing as well as RF immunity testing under its EMC/EMI capabilities. Also, we are capable of RF data record/playback in our RFR series of systems designed to support RF testing in applications where the source signal is not readily available in the lab where units must be tested.

Get Help