Showing results: 436 - 450 of 1074 items found.
-
National Technical Systems
In addition to its multiple open test ranges/arenas, the Camden facility has over 35,000 square feet of enclosed climatic conditioning area and facility space. This allows for sequential or simultaneous Safety series and IM testing of AA&E items. This extensive facility infrastructure allows NTS to conduct parallel projects and tests for expedient testing of multiple items.
-
EZ3-4.5 (Triple LCD in 2U) -
Murraypro Electronics
Murraypro was first to introduce the Triple 16:9 in 2U format. Designed for applications where 16:9 and 4:3 aspect pictures must be monitored with correct geometry, it will also be useful where picture quality is important too. EZ3-4.5 is ideal for compact and space limited applications, fitting within a 2U rack envelope and yet it is only 70mm deep.
-
60-105-001 -
Pickering Interfaces Ltd.
This 4-slot USB/LXI modular chassis offers a small lightweight form factor, making it ideal for portable, benchtop, and space restrictive applications. The chassis is designed for desk or rack mounting and features remote control via USB or LXI Ethernet. Remote control over a network enables the switching function of a test system to be located as close as possible to the target equipment.
-
TruView™ Cube -
Creative Electron
The Perfect Solution for a Powerful Small Form Factor X-ray Inspection System. The all new TruView™ Cube X-Ray Inspection System is a fully motorized radiography system developed to meet the stringent requirements of electronics assembly and component inspection. Ideal for applications where space is premium, the the TruView™ Cube X-Ray sits comfortably on your laboratory bench.
-
MPC-200/MPC-385/MPC-325 -
Sutter Instrument Company
Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been asking for. A single controller capable of running 2 manipulators! Sutter Instrument has taken the simplicity of the MP-225 controller and expanded it to run two manipulators from a single controller/ROE.
-
PI-5000 -
ETI Precision
The PI-5000 is composed of the PI2500 and the AUX-5000 auxiliary output unit, which when combined gives the unit the capability of testing 4000 ampere breakers, with essentially the same specifications as the proven PI-4000B. The auxiliary unit is smaller than the PI2500, so it can also be maneuvered easily in tight spaces, or lowered into shafts and manholes that would not be possible with a larger single piece unit.
-
Phoenix DB-6 -
Teledyne LABS
The Phoenix DB-6 (six-cell diffusion block) provides an ideal platform compliant with 21 CFR Part 11 for release-rate testing of six vertical diffusion cells at once using manual sampling methods. Controlled by an advanced computerized display, the DB-6 provides uniform and precise heating and stirring of six cells. The compact footprint of the DB-6 economizes on lab bench space.
-
ELMA Electronic, Inc.
Easily customizing your system with the exact I/O you need is a crucial step which can be addressed quickly and cost effectively using one of Elma's wide range of I/O communication products. Popular board sizes include PMC and XMC mezzanines allowing customization of your system without replacing more expensive boards or filling precious slot space.
-
310120101 -
Virginia Panel Corporation
The lightweight and rugged 18 module Receiver provides a solution that will accommodate larger ATE chassis’ (PXI, VXI, SCXI). It allows immense versatility by affording space for up to an 18 slot PXI chassis.
-
DPA Components International
DPACI's component analysis laboratory performs major analytical functions, such as destructive physical analysis, failure analysis, counterfeit analysis, and material analysis on components & devices. Our destructive physical analysis techniques are performed in accordance with standards and methods used in most military and space program requirements. Solutions for difficult production problems are resolved through our failure analysis procedures.
-
Hoyt Electrical Instrument Works Inc.
Hoyt edgewise meters have high visibility scales and straight forward design that make them especially suited to small, limited space, rack mounted power supplies and allied equipment. Supplied bezel and mounting hardware enable quick, trouble-free installation. Choose from the 685-1, 685-2, or the 685-3 depending on whether you need a single meter or multiple edgewise meters.
-
WIT Co., Ltd
It is a simple and convenient item that allows you to search for and replace the test probe at the same time. With needle-nose pliers, when pulling out a pin in a narrow space, excessive force was applied, which could damage the adjacent pin or widen the hole diameter. With our original pulling tool that supports the minimum pitch, you can easily pull out without damaging the adjacent pin.
-
Raman -
Wasatch Photonics
Our f/1.3 modular spectrometers can be configured for fiber couple or free space. They use our proprietary volume phase holographic gratings paired with f/1.3 optics. This allows us to build a high-performance spectrometer in a small package. These spectrometers constantly outperform larger more expensive units. They have high throughput and are ideal for applications that demand fast integration times or for low light applications.
-
SHOTPOINT -
Databuoy LLC
Shotpoint’s indoor sensor includes the basic sensor board in a rugged plastic enclosure with an additional PoE module. The enclosure includes a mounting ring that attaches to a 1-gang electrical box or low voltage frame for easy mounting to walls and/or ceilings. Two(2) sensors with 165ft maximum spacing provide total area coverage and peace of mind in any indoor space.
-
ATOS Compact Scan -
GOM GmbH
With the ATOS Compact Scan, GOM presents a portable 3D scanner for full-field measurement and inspection. This lightweight and compact overall solution opens up complete new application areas and offers the user various possibilities for 3D digitizing and analyses of parts, tools and systems. Even in cramped spaces or interiors, the compact solution of the ATOS series allows fast and precise measuring of surface geometries.