Showing results: 451 - 465 of 3161 items found.
-
HIOKI E.E. Corp
Dual-band 1kHz/1MHz Capacitance Meter for High Speed Testing of Ceramic Capacitors on Production Lines
-
Raptor Photonics
A range of surveillance and scientific EMCCD cameras offering low noise combined with speed and sensitivity.
-
ERAVANT
This sensor module is designed and manufactured for short range measurements of a moving target's speed and direction.
-
XS-100 -
Colby Instruments, Inc.
The XS-100 is designed for those who need faster switching speeds and measurements without interruptions
-
82350C -
Keysight Technologies
Support fast transfer speeds for high data throughput and easily attach to low-profile PCs.
-
UC9110/UC9115 -
UC Instruments, Corp.
The UC INSTRUEMNTS UC9110/UC9115 DCA-M 10 GHz/14 GHz Optical & Electrical Sampling Oscilloscope is a high speed, performance, flexible one channel optical/electrical that can operate from 1.0 to 14.0 Gb/s (consult factory for higher or lower operation speeds). It is also a stand alone Eye-diagram analyzer test.
-
ADSE 740 -
ATEQ Aviation
The ADSE 740 is a complete high performance dual pressure Ps and Pt standalone test bench specially designed to be used in the workshop or in the laboratory to test and calibrate all air data equipment such as altimeters, vertical speed indicators, air speed indicators, MACH-meter, air data computers ...) and sensors.
-
ATG9100 -
Innovative Technical Systems
The ATG-9100 is an example of a laboratory-quality instrument that will simulate complex target motion. Microwave signals from the speed camera enter the instrument through an integrated antenna which is then downconverted and digitized. Target simulation data is added to the digitized signal to provide range and Doppler information. The modified digital data is then converted back to an IF and upconverted to the original microwave frequency of the speed camera and radiated back through the antenna. Since the ATG-9100 can be phase-locked to an external 10 MHz reference standard, this instrument is suitable for use as a calibration standard for speed cameras.
-
AVT-423 -
Advanced Vehicle Technologies, Inc.
Multiple protocol interface. Ethernet (TCP/IP) to control computer (Client). Fully capable interface with room to grow in functionality and capability. One channel of 2-wire high speed Classical CAN. One channel of either 2-wire high speed Classical CAN or Single Wire CAN (SWC); software selected. Two channels of 2-wire high speed CAN-FD. Two channels of LIN or KWP (software selected). User programmable automatic features. Six more channels of LIN can be added. Status: Full production, normally in-stock.
-
EV-SFP-171 -
UC Instruments, Corp.
The purpose of this SFP+ evaluation board is to provide the designer with a convenient means for evaluating SFP+ fiber optic transceiver such as 10 Gb/s(up to 16 Gb/s) SFP/SFP+ transceiver compliant with ANSI Fibre Channel FC‐PI‐5 for high speed electrical and optical specifications. This board provides SMA connectors for high speed TX and RX signals. The low speed control signals such as Tx_Fault, Rx_LOS and Rate_Selects can be controlled by using on board switches and test points. A connector for 2 wire serial interface to the module is also provided.
-
Smiths Interconnect
Offering synthesizer architectures supporting operating frequencies from 0.1 to 40 GHz. Our direct analog and digital designs feature fast switching speed of less than 100 nanoseconds and ultra-low phase noise. Our wideband indirect synthesizer designs support your requirements for smaller size and lower power consumption and offer typical switching speed of less than 500 microseconds. Composite architecture designs (Direct and Indirect Synthesis) are also available to optimize phase noise, switching speed, size and power consumption.
-
Lt-C/M1950 -
Teledyne Lumenera
The Teledyne Lumenera Lt-C/M1950 camera reaches a frame rate of up to 162 fps. This is important in applications such as factory automation where camera frame rate has a direct relationship to the speed of a conveyor belt, for example. By using a faster camera, the high frame rate allows an assembly line to increase the speed at which products are being inspected. An example of this is with flat panel inspection where the speed of inspection can increase by taking a greater number of images with the high frame rate of the Lt-C/M1950, effectively increasing the potential production.
-
16470 -
Ultra-Tech Enterprises, Inc.,
The Speed-O-Calibrator consists of two sections, control box and drive unit. The control box is stored inside the drive unit for easy portability. The control box weighs less than 6 lbs and is used in the cab of a locomotive to control the speed of the Axle Alternator Drive Unit. The Drive Unit drives the Axle Alternator at various speeds while the user verifies that the correct speed is displayed in the cab. The test system provides a complete test of the speedometer system, including all types and paddle lengths of Axle Alternators.
-
D443 -
SDL Atlas
Complete with stand and spindle set - direct display of viscosity in centipoise or millipascal/seconds, percent torque, spindle number and speed (18 speeds 0.3-100RPM). Complete with set of spindles for low or medium viscosity. Complete with hard carrying case. Measures viscosities of dye solutions, pastes, sizing compounds, lubricants or adhesives.
-
Vidac Solutions
Vidac has created several spin test systems ranging from the basic manually operated model shown here to fully automated machines that can spin the customers components to a specific speed profile. Our 3D design capability ensures the tight tolerance fit required for high speed rotation.