Filter Results By:

Products

Applications

Manufacturers

Standards

A controlled reference or acknowledged technical criterion.

See Also: IEC, IEEE, Mil


Showing recent results 3496 - 3510 of 5355 products found.

  • GloveBox ICP

    Teledyne Leeman Labs

    Whether you’re handling radioactive material, biohazards or ultra high purity chemicals, a controlled atmosphere may be essential for your application, and your safety.At Teledyne Leeman Labs, we are compatible with a wide variety of containment options for our family of ICP-OES products. Teledyne Leeman Labs Enclosure ICP systems provide the same high level of analytical performance as our standard instruments, but are designed specifically to adapt to pre-existing containment envelope (glovebox, fume hood, clean microenvironment, etc.).

  • GN Range Broadband Power Amplifiers 100 KHZ - 200 MHZ

    GN Series - PRANA

    Class A solid stateBroadband (instantaneous single band): 100 kHz 200 MHzTypical output power : 500 W CWLinear output power (1 dB compression) guaranted with harmonics <-20dBc:P1dB > 450 W and H < -20 dBc up to 100 MHz andP1dB > 180 W and H < -20 dBc from 100 MHz to 200Air cooling: self contained fansCan operate in full mismatch conditions without damageReliable, efficient and robust19" Rack3 years standard warranty

  • Gold Box Power Supplies (AC-DC)

    Acopian Technical Company

    A broad selection of power supplies offering unusually high performance - many models have regulation of ±0.005%. Electronic current limiting and provision for remote voltage sensing are standard features; overvoltage protection is available as a built-in option. Rugged extruded aluminum cases include threaded mounting holes on bottom, back, and side, permitting mounting in any position.

  • Goniophotometer

    HPG1900 - Hangzhou hopoo optoelectronics technology Co., Ltd

    HPG1900 goniophotometers can measure all types of lighting sources and luminaires including lamps of all kinds, indoor and outdoor luminaires, and floor lights of all kinds on C-γ plan and B-β plan, with high accuracy. IESNA files output and match international universal lighting design software, meets the requirement CIE and IESNA standard.

  • Goniophotometer for Traffic Signal Lamps

    LSG-1950S - Lisun Electronics Inc.

    LSG-1950S is a high automatic test system for luminous intensity distribution of luminaires and can be applied to quality evaluation and quality control for signal luminaires, luminaires for cars, motors, vessels and Retro-reflectors. LSG-1950S system is a goniophotometer which can measure all kinds of lamps and luminaires.• Rotations of test samples around both vertical axis (-90°~+90°) and horizontal axis (-35°~+35°) • Accuracy of angle: 0.1° • Resolution of angle: 0.01° • Photometer detector: CIE class A (standard class) accuracy • All software control, high intellectual faculties and simple operation

  • Gravity Meter

    CG-6 Autograv™ - Scintrex Limited

    The CG-6 Autograv™ is the next generation land gravity meter combining a modern, intuitive user interface with our renowned quartz sensor technology housed in a rugged yet lightweight enclosure. The new CG-6 offers fast, reliable and precise gravity measurements and includes an array of mapping and post processing functionality with our new Lynx LG software conveniently installed on the tablet computer, provided as a standard feature.

  • Grease Analysis

    Maintenance Reliability Group, LLC

    MRG Labs follows grease sampling and analysis standards outlined in ASTM D7718 and ASTM D7918.  Grease analysis is a valuable tool for determining the condition of the lubricant and discovering abnormal conditions in equipment that may otherwise lead to unexpected failures. Our customized grease test slates are designed to identify the specific failure modes that may be damaging the component.  Each analysis report comes with comments and recommendations unique to the component to improve reliability.

  • Ground EMI Filters

    OnFILTER, Inc.

    High-frequency signals on ground is never good news - it interferes with normal operation of equipment and creates electrical overstress (EOS).  However it is easy to block propagation of EMI on ground by installing highly-effective ground EMI filtes in ground lines. Our unique patent-pending ground EMI filters provide very low impedance for DC and mains' power while effectively blocking propagation of high-frequency currents throughout facility or equipment ground. Ground filters meet safety standards, as well as ANSI/ESD S6.1 and ANSI/ESD S20.20.

  • Ground Resistance Test System

    R1L-C - TEGAM Inc.

    The Model R1L-C is a Ground Resistance Ohmmeter designed to measure grounding system resistance as well as soil resistivity, over ranges from 2 to 20 k full scale. These resistance measurements correspond to soil resistivity from as low as 2 -cm to as high as 600,000 -cm. The R1L-C is capable of Wenner, Fall of Potential, 62% methods as well as bond and continuity measurements. Two, three and four are standard for this instrument.

  • Gyro Evaluation & Test Equipment

    MS1113 - Meltronics Systemtech

    The automatic test bench for gyros (ATP) is used to carry out the final acceptance test for the gyros in the stand-alone mode. It is a PC based test set up incorporating standard and custom built test and measuring instruments interfaced by GPIB bus. The gyros are installed on the platform, which is used to provide information pertaining to the angle at which aircraft is flying.

  • HACCP Manager Enterprise Kit

    HACCP Manger - Cooper-Atkins Corporation

    The HACCP Manager Kit provides the hardware for the collecting, reporting, analyzing and storing of product temperature records and checklist documentation. The Handheld is a data-collecting instrument designed to simplify the gathering of temperatures and the documentation of corrective actions as well as managing standard checklist processes. The 37200 model works with the HACCP Manager Enterprise software which is accessed via the internet. Data is transferred data to the software via a USB cable. *Separate software subscription required

  • Frequency Sensor

    DARE Electronics

    DARE?s frequency sensors and monitors are available in both AC powered and DC powered models in a wide variety of standard or custom enclosures. Used in aircraft, ground support equipment (GSE), ground power applications, and other military and industrial applications, DARE frequency sensors, monitors, and frequency sensing relays will protect equipment that is sensitive to fluctuations in power line frequency from damage due to over and / or under frequency conditions.

  • Frequency to Current Converter

    DAT4540R - Datexel

    The Frequency to Current converter DAT4540R is a signal conditioning din rail mount converter which converts a pulse input to an analog output equal to the set range which is selectable from 0.1 Hz up to 20 KHz. The DAT4540R also provides 2 relay outputs and a transistor output. The input can be from a Tacho, TTL, PNP transistor or from any Namur standard. The DAT4540R provides a Voltage or Current output that is isolated from the power supply and input.

  • FT-IR Spectrometer, Frontier Optica

    L1280032 - PerkinElmer Inc.

    Recognizing the need for the highest level of ordinate accuracy, the Frontier Optica is an FT-IR spectrometer developed specifically to meet the demands of the optical filters and specialty glass and coatings industries.Developed to measure optical coating and high refractive index materials, this advanced system incorporates features designed to minimize or even remove the sources of ordinate errors associated with standard FT-IR. Now FT-IR users can exploit the benefits of modern FT-IR and achieve higher levels photometric accuracy than ever before.

  • FTTx Amplifiers

    Macom Technology Solutions Inc.

    MACOM’s FTTx amplifiers are designed for PON, RFoG and SFU receiver equipment and are offered in small, plastic QFN packages with integrated amplifier and attenuator functions. All parts cover the full 45 to 1000MHz CATV band. 5v and 12v solutions are offered with power consumption of ≤ 1.5Watts. MACOM’s FTTx amplifiers are characterized with industry standard photodiodes, covering optical input ranges from -12 to +3dBm and each sample EVK comes complete with a photodiode and APC connector.