Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.

See Also: Test, Testing, Audio Testers, Automotive Testers, Battery Testers, Cable Testers, Component Testers


Showing recent results 3046 - 3060 of 4490 products found.

  • SPI Flammability Tester (Vinyl Material)

    TF318 - TESTEX Testing Equipment Systems Ltd.

    SPI Flammability Tester (Vinyl Material), to determine the ignition properties of vinyl plastic film material according to CFR 16 Part 1611 U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic film.The rate of burning shall not exceed 1.2 in./s as judged by the average of five determinations lengthwise and five determinations transverse to the direction of processing, when specimen is placed at an angle of 45 degree and expose to the standardized flame (22# fire nozzle, 1/2 inch. In length).

  • Semiconductor Large Range Type Tester

    HS-PSTT - HenergySolar

    HS-PSTT large Range Type Tester is a high-grade semiconductor material Type testing equipment,has the feature that testing large range,special suitable for testing the high-Resistivity Silicon Material(contains Silicon Core, phosphorus stick, Boron stick and so on),the resistivity require range is 0.0001~19999Ω·cm, Covers all measurement requirements of various silicon material type testing at the semiconductor and solar energy level at present .

  • Transformer Ohmmeter DC Resistance Tester

    HTO - Hention Electrical Equipment Co., Ltd.

    HTO Transformer Ohmmeter also called DC resistance tester is used for rapid measurement of DC resistance of transformer windings, motor winding, the reactor winding, arc-suppression coil, PT and other inductive devices. It can be used to check the welding quality of welding joints, short circuit, damaged, lead errors, the state of the tap switch and other issues.

  • Wire Crimp Pull Tester (Manual)

    WT3-201 - Mark-10 Corp.

    The WT3-201 wire crimp pull tester is designed to measure the pull-off force of crimped wire and tube terminations. An ergonomic lever allows for easy application of up to 200 lbF (1,000 N) of crimp pull force. Adjustable wire terminal grip contains multiple slots for wire diameters up to AWG 3 (0.25 in [6.3 mm]).

  • Transformer unloaded &loaded characteristic tester

    NRRL-C - Wuhan Nanrui Electric Co,. Ltd

    NRRL-C transformer unloaded &loaded characteristic tester is dedicated to the transformer unload loss,short-circuit loss , zero sequence impedance,short-circuit impedance of the instrument,unload loss and short-circuit losses are generators,motors,transformers trials important items;according to GB1094.5-85 and IEC14/268CD regulations,changes in the amount of short-circuit impedance transformer winding is to determine whether the deformation of the sole criterion.The instrument circuit design is exquisite,unique ideas,making its performance is superior,powerful,small size,light weight,extremely easy to use site.

  • Advanced Battery Conductance/Electrical System Tester

    PBT-200 - Midtronics, Inc.

    Building upon the success of the PBT-100, the first battery conductance tester built for the professional technician's toolbox, the PBT-200 offers these additional capabilities: Shows available power in CCA in addition to condition and voltage. Bad Cell Detection. Advanced Starter Testing: Down arrow displays the captured low voltage from cranking the engine for simple starter analysis.

  • Battery Conductance and Electrical System Tester

    MDX-P300 - Midtronics, Inc.

    The MDX-P300 is the first tester available from Midtronics which features an integrated printer allowing for immediate printing of test results. Now it is easier than ever to show thecurrent state of the battery and electrical system by providing customers with a printed result of the battery and system test. Using patented Conductance Technology, perform a quick, simple, and accurate battery or system test in seconds, and review the printout with the customer for added impact to preventive maintenance routines and customer service.

  • Low Temperature Kinematic Viscosity Tester

    SYD - Chongqing Lushun Scientific & Technological Development Co., Ltd.

    The instrument is designed and made as per the Industry Standard of People's Republic of China SY/T5651 "Technical Requirements for Petroleum Products Kinematic Viscosity Tester". It is suitable to determine kinematic viscosity of liquid petroleum products (Newton liquids) at a constant temperature as per the National Standard of People's Republic of China GB/T265 "Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity".

  • Automated Discrete Semiconductor Tester (ATE)

    5000E - Scientific Test, Inc.

    Same Proven Technology as all 5000 Series Testers. High Speed Single Test Measure. Capable of Testing Multiple and Mixed Devices. 1KV Standard, 2KV Optional. 1NA to 50A Standard, 100A Optional. 0.1NA Resolution. Complete Self Test. Auto-Calibration. RDSON to 0.1MOHM Resolution. Windows Application Software. Optional Scanner. Optional Wafer Mapping. Optional Curve Trace. MOSFET, IGBT, J-FETTriac, SCR, Sidac, Diac, Quadrac, STS, SBS Transistor, Diode, Opto, Zener Regulator, MOV, Relay. UNDER $23,000.00

  • Electrical Button Life Span Tester

    IEC60884 - Shenzhen Autostrong Instrument Co., Ltd.

    Plugs and the sockets life tester is designed according to the corresponding provisions of the GB2099-96,GB16915-97 and IEC60884-1,used to detect the mechanical life test of the household and similar purposes of the plugs and the sockets products.

  • LED Luminous Intensity Distribution Tester

    LS860 - Lisun Electronics Inc.

    LS860 Luminous Intensity Distribution Tester is a precise electronic instrument for measuring LED luminous intensity. It’s strictly designed according to LED standard requirements of CIE 127-1997 A or B Condition.

  • Winding Testers for large electrical machines

    PRESCO AG

    The Presco winding testers have been specifically designed as impulse test systems for diagnosis of windings and coils of large electrical machines in the MW-and MVA-range according to the international standard IEC 60034-15 ("Rotating electrical machines. Part 15: Impulse voltage withstand levels of rotating electrical a.c. machines with form wound stator coils"). Demand for our new line of impulse test systems arose from the fact, that our customers required a performance level of impulse withstand testing that was difficult to obtain with commercially available products. Unlike other commercial products, the Presco impulse test systems provide a real resonant circuit between the inductive test object and the built-in energy storage capacitor with the oscillating current flowing between the test object and the built-in capacitor for the entire duration of the damped oscillations. Thus the sensitivity of the measurement is greatly enhanced. Furthermore the front time of the generated impulse tf= 0.2s (+0.3s / -0.1s) complies with the IEC 60034-15 specifications. Our easy-to-use impulse test systems are designed using state of the art technology and excel with their high-energy discharge capability as well as their ruggedness, reliability and longevity in harsh environments. Our impulse test systems are available as stationary units for voltages up to 15 kV and mobile units up to 6 kV, both being equipped with all the safety measures common to professional high voltage test equipment. Impulse test systems with higher voltage outputs will be available in the near future as replacements of old Haefely WP-series. The capabilities of the systems can be expanded with AC- or DC-voltage testing features at request. MOCOTE Mobile coil tester for on site measurements on large electrical machines Mobile coil tester specifically designed for on site measurements on large electrical machines (e.g. rotor poles of large synchronous machines) Rugged design for reliable

  • Multi Function Cable Tester Pro

    43069 - LINDY-Elektronik GmbH

    The unit not only identifies open circuits, short circuits, cross-wires and mis-wires for all these cable types it also shows the pin-to-pin connectivity and has the ability to record up to 100 tests that can then be uploaded to a PC. Advanced cable tester ideal for use in computer workshops and repair centres to test commonly used computer and AV cables such as: IDC40, IDC40 extension port, HD15 Male / Female, Audio 3.5mm. RJ-11, RJ-45, eSATAp 5V, SATA 7pin. USB 2.0 Type A, B, Micro A, Micro B & Mini B & USB 3.0 Type A, B & Micro B. HDMI, Mini HDMI, Micro HDMI, DisplayPort.

  • MIL-STD-1553 A, B Simulator/Analyzer/Tester

    CIC201 - Andor Design Corp.

    MIL-STD-1553 A, B Simulator/Analyzer/Tester - CIC201B VME/VXI B Size Interface, CIC201C VME/VXI C Size Interface - The CIC201 can be used for Validation Testing, Production Testing, full bus simulation and monitoring, as a general purpose 1553 interface or a stand alone bus Analyzer. For precise message scheduling and measurements, the Major and minor frame times are independent of message sequences or retransmissions on errors and the start of all command messages are independent of message length, response time or length of response. Message timing is calibrated and RT responses have low jitter.

  • Internal Bond Tester And Prep Station

    80-20 - Testing Machines, Inc.

    The Internal Bond Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impact measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allows five specimens to be accurately prepared simultaneously. The Prep Station requires a filtered air supply meeting IG4 Industrial Grade Air: ISO Class 1-4-1.