Showing recent results 3406 - 3420 of 4636 products found.
-
Nippen Electrical Instruments Co.
NIPPEN's Insulation Testers are used for direct reading of insulation resistance of electrical rotating machines, power distribution lines, communication cables, insulators , control and switching equipment etc. They are robust instruments, incorporating a built-in-hand driven generator and a solid-state circuit for a stabilized D.C. output.They are robust instruments, incorporating a built-in-hand driven generator and a solid-state circuit for a stabilised D.C. output.
-
CIC429 - Andor Design Corp.
The CIC429 is a full featured, high performance Serial bus Simulator Analyzer Tester developed by Andor Design for test and simulation of ARINC 429 or similar Avionic buses. The CIC429 is designed as a 5/8 size plug-in card for an ISA bus. An on board microprocessor off loads the host by organizing the data in a predefined structure in the dual port RAM. Programming the CIC429 consists of changing this data, which can be done on the fly for real time applications
-
Panther - Qmax Test Technologies Pvt. Ltd.
Designed as an Ultra Fast Open / Short / Diode Drop tester for semi-con industry, where production testing of high pin count devices are involved and test time is critical. High speed testing at 2 seconds for 2 million test combinations. Can be interfaced to any type of test fixtures. Multi-Site Test support for Strip or Multiple device test.
-
CA9802 - UC Instruments, Corp.
CA9802 is a high performance, easy to use, allinone, costeffective,4 x10 Gb/s Bit ErrorRate Tester(BERT) for current 40 GTOSA/ROSA components R&D and manufacturing environments as well as field installations. The CA9802 incorporates an internal reference clock, a pattern generator, clock recovery circuits, and a BER analyzer, in one compact modulethat provides both electrical and optical interfaces at data rates up to 11.9Gb/s. The CA9802 is offered with an RS232 or USB interface.
-
CA9803 - UC Instruments, Corp.
CA9803 is a high performance, easy to use, all‐in‐one,costeffective, 4 x 28 Gb/s Bit Error‐Rate Tester(BERT) for current 100 GTOSA/ROSA components R&D and manufacturing environments as well as field installations. The CA9803 incorporates an internal reference clock, a pattern generator, clock recovery circuits, and a BER analyzer, in one compact module that provides both electrical and optical interfaces at data rates up to 28 Gb/s. The CA9803 is offered with an RS‐232 or USB interface.
-
ForTest Italia Srl
A touch of innovationThe new T8997 leak tester was designed with the idea of combining two different types of measurement in a single instrument, making it suitable for leak tests and flow tests.The new video controller “ForTest MMI” brought a superior level of human-machine interaction, thanks to an innovative capacitive panel in tempered glass, around a splendid 6.2” colour display.Parameter programming is much faster thanks to the new numerical keyboard integrated in the menus, and the big display makes viewing even clearer of the test cycle.
-
6221 EL-M - Standard Electric Works Co., Ltd
● High contrast OLED display.● Designed for viewing in the dark, for mining industry.● Microprocessor-controlled.● Indicates phase rotation● Indicates phase presence● TEST for disconnection sensitivity● Battery status indicator● Measures Voltage Phase to Earth● Select one of 3 Phase to test ELCB.● Color-coded test leads.● Phase presence indication from as low as 100Vac.● Fused earth leakage tester.● ELCB works 50Vac to 330Vac 50Hz / 60Hz.● Phase rotation and presence does not require battery to indicate.
-
VGA-SE10 - Data Sync Engineering
This is the brand new, pocket sized, VGA-SE10 computer monitor tester designed for on-site testing and aligning of computer monitors and video projectors without the need of a computer. The VGA-SE10 provides 16 switch selectable display patterns at the 1024 x 768 video resolution commonly used with XGA projection systems. The VGA-SE10 will test for Bad Pixels, Color Wheel Operation, Blank Raster, Convergence, Linearity, Color Balance, Screen Alignment and Interconnecting Cable Quality.
-
900-398 - Phase II Plus
The 900-398 Vickers Hardness Tester is engineered to produce a clear indentation and a more precise measurement. By means of a load cell, closed circuit system for control, the CPU controls testing force to load/dwell/unload, allowing for the highest degree of accuracy. The large LCD shows the measuring methods, the testing force, the indentation length, hardness value, the dwell time of the testing force as well as the number of the measurement on its screen.
-
Kast Eng Co. LTD.
All electric equipments & systems is required Impulse Simulation Test to the to be tested under the condition where the power source is applied to the product-under-test.At this test condition, the decoupler is needed to reduce the impulse flowing through the power line while testing. And the coupler which is inserted between tester and product, to simulate the actual condition, so the electric circuit of decoupler is prescribet by IEC rules.
-
MK Test Systems Ltd.
Automatic high voltage wire harness testers are used in a variety of industries, such as aerospace and defence through to rail, and are used to test any equipment which contains a high number of electrical wires, or active components ensuring these pass specified test criteria at the sub-assembly and final stages of construction. These systems ensure the wiring and components are 100% compliant and undamaged, recording every test measurement and aiding diagnosis of detected faults.
-
MCVK - Matco Tools
*Tests compression on all domestic and import cars and trucks with gasoline engines*Compression tester kit includes: 2-1/2" gauge with dual inch/metric readings: 0-300 psi and 0 to 21 kg/cm2, 14mm/18mm solid short adapter, 14mm/18mm long flexible adapter and 14mm long reach adapter*Checks vacuum and fuel pump pressure and locates air leaks in fuel lines, vacuum operated chokes and emission control systems on all domestic and import cars and trucks with gasoline engines
-
PT9401E - FULLING & CEIEC CO., LTD.
PT9401E Telephone Dialing / Caller ID Analyzer is a new kind of digital meter designed specially for the test of telephone dial characteristics (Pulse / Tone) and Caller ID. The tester has not only reached advanced level of the same kind ones at home and abroad in functions speed and precision but also been an indispensable appliance both for telephone design and research.
-
HCAI-1 - Lisun Electronics Inc.
The HCAI-1 High Current Arc Ignition Tester is according to IEC 60950-1:2001, BS EN 60950-1:2001, BS 7002:2000, GB 4943.1-2011and UL746A, IEC60947.1: 1999, GB/T14048.1-2000, IEC730.1:1993, GB14536.1-2008 and other standards required simulated safety test project. Parts and components of insulating materials or other solid combustible materials that are prone to flame spread in electrical and electronic equipment may ignite due to proximity or contact with electric arc, causing electrical fire and endangering the reliable operation of equipment and personal safety.
-
MINIMAC® 50 & 55 - Magnetic Analysis Corp
*Affordable, compact ECT testers offer high performance at a low cost.*Both designs operate at speeds over 4000 f.p.m. (with standard coils), take up less space, and do not require cooling. (Higher speeds achievable with wide-spaced coils)*Detect short surface and some subsurface defects in tube, bar, wire and rod.*Designed with software controls for all functions including phasing,filtering and sensitivity.*Full-color polar and linear monitor displays of real time, true wave form signals.*Enable on-site or remote location review.
