Showing recent results 3466 - 3480 of 4500 products found.
-
Static Solutions Inc.
Tests ground for all 110v electrical circuitsWill determine the status of all electrical groundsEasy to use LED lightsWarranteeProduct conforms to the ESD S.20.20 spec standardsIdentify electrical problemsUsed with the Ohm-Stat RT-1000 resistivity meter
-
AMIDA-3001XP - Amida Technology, Inc.
AMIDA recently introduced two new analog / mixed signal and logic options for AMIDA – 3000 series – the AMIDA – 3001 XP and AMIDA – 3050 test systems. Both enhance the ability of the AMIDA-3000 Series to provide cost- optimized test solutions for the full range of power consumer and mobility devices. AMIDA – 3000 Series offers double the analog and digital pin count per instrument as current analog subsystems, resulting in lower cost per pin and twice the pin count per system. This enables higher levels of multi-site for cost – effective testing across a board range of applications. It provides a powerful combination of hardware and software features targeted at the test requirements of high speed IOs. The real time protocol detect feature built into the AMIDA – 3000 Series simplifies test development and can be used to reduce test time of high speed IOs by up to 60% ~ 100%.
-
TDSTestr Low - Eutech Instruments
Adjustable TDS Factor - Select the appropriate TDS factor from 0.4 to 1.0 for more accurate measurements.
-
ECTestr10 High+ - Eutech Instruments
Large Display Screen - Displays mode, ATC, battery level and temperature (+ plus series models).
-
-
HBA18D - TOP AUTO SRL
The HBA18D model is a mechanical headlight beam setter with digital luxometer, mirror visor, base on castors, pole with precision slides in self-lubricating nylon, fixed base and fixed panel.
-
HBA19D - TOP AUTO SRL
The HBA19D model is our mechanical headlight beam setter with digital luxometer, which mounts an adjustable measuring panel, a mirror viewer. The fixed pole is 1660mm. Many options are available for the HBA19D.
-
APC102 - Matco Tools
Uses shop air (no manual labor) to generate pressure in a cooling system. Adjustable pressure regulator is used to match vehicle cooling system pressure rating.
-
AudioJog Rack 8 - CableJoG Ltd
There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.
-
RandHDPE HDPE Family - Test Electronics
HDPE plastic plates for extra easy machine ability and upgradeability. Designed for Research & Development and Pre-Production where product engineering changes are a weekly issue. The primary design focus is easy upgradeability. In R&D and Preproduction, design changes can happen every week. This fixture unlike normal test fixtures was designed to be easily taken apart and updated. Disassembling a normal bed of nails test fixture over and over again can be a major disaster with wire breakage and test pin bending issues. The modular design of the Rand fixture allows for easy disassembly without flexing the wires or risk of bending test pins. The Rand fixture provides complete easy access for machining, drilling and wiring updates.
-
Prober Press Rods Family - Test Electronics
Production volume test fixture with swappable test plates, front and rear panel inlays, and multi-testing compatibility with process carrier pallets. Swappable test plates provide the ability for one fixture base to support a variety of units under test. Interchangeable front and rear panel inserts provide further customization. Interoperability with process carrier pallets provide multiple board testing capabilities, panelized testing, and flex circuit testing. A selection of interfaces to general testing equipment provide for a wide selection of customized testing features.
-
Protector Press Rods Family - Test Electronics
Designed for testing heavy massive boards. Boards with heavy components like large transformers and inductors can destroy normal test fixtures. This design utilizes a 3 plate system where an internal lever actuated sub plate containing the test pins raises to probe the circuit board when the handle is pulled. Heavy boards can bend and break exposed test pins. Similarly large boards which need to be probed by very small delicate test pins can also benefit from this protected test fixture design. This fixture is recommended in situations where there is a high board mass to pin size ratio and pin protection is required. Front and rear panel modular inserts allow for easy updates and customizations to the user hardware interface.
-
SME1203 - Scientific Mes-Technik Private Ltd
Single Phase , 3 kV Impulse winding testing Low inductance impulse test: down to 10 μH Low energy test without damaging the coil Fast detection of winding insulation at a speed of 5.5 Meas/sec 4 kinds of waveform comparison methods Up to 40 MSPS sampling rate 320×240 dot-matrix graphic LCD display Multi-trigger mode programmable Voltage, Time and Frequency measuring functions Direct display of comparison result
-
Rand Press Rods Family - Test Electronics
Designed for Research & Development and Pre-Production environments to support often reoccurring product design changes. The primary design focus for this fixture is ease in applying engineering changes and resilience to the abuse of applying multiple engineering changes without damage. In R&D and Preproduction, design changes and updates can occur every week. This Rand fixture, unlike normal test fixtures was designed to be easily taken apart and updated. Constantly disassembling modifying and reassembling a normal bed of nails test fixture over and over again can be a major disaster with wire breakage and test pin bending issues. The modular design of the Rand fixture allows for easy disassembly without flexing the wires or risk of bending test pins. The Rand fixture provides complete easy access for multiple updates requiring machining, drilling and wiring changes.
-
HS-PSRT - HenergySolar
It use Four Probe to test the resistivity and P/N type of wafers、ingots and all type of silicon materials.It can be used by Solar and Semiconductor industry.
