Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.

See Also: Test, Testing, Audio Testers, Automotive Testers, Battery Testers, Cable Testers, Component Testers


Showing recent results 4486 - 4500 of 4538 products found.

  • Tone Amplifier And Tone Generator Set

    AM5/TG5xs - JSD TestPhone Ltd

    The New Tone & Amp Set are state of the Art Testers offering touch button technology, visual qTrace (quick trace) as well as audio tracer tone technology providing accurate wire location, high output volume and sensitivity, tone tracker functionality, Visual/Audible indication of Digital Traffic, filtered amplification with multiple volume levels and two normal tones and four tonetracker tones with constant and variable interrupt rates, short detection and indication, capacitive output connection, Quick change battery and low battery indication in New custom designed High impact resistance enclosures, fully sealed to IP67.

  • Glow Wire Test Apparatus

    GWT A2 - SCR ELEKTRONIKS

    GLOW WIRE TESTER (also known as Glow Wire Test Apparatus) is designed to carry out fire hazard testing as specified in IEC 60695-2-10 2000-10. Flammability test is to check the ‘Resistance to Fire’ of electrical insulators that touch directly conducting parts & also parts of insulators. This test is also referred in many other standards such as IS 11000, IS 3854 : 1997 / IS 1293 :1988 / IS 371 :1999 & IS 11000 Pt 2 Sec 1, IEC 60335, IEC 884/94, IEC 60598, IEC 61058, BS 6458, BS EN 60695–2-10,11,12, etc.

  • Bluetooth Measurement Application, Multi-Touch UI

    N9081C - Keysight Technologies

    The Bluetooth measurement application is one in a common library of more than 25 measurement applications in the Keysight X-Series, an evolutionary approach to signal analysis that spans instrumentation, measurements and software. Transforming the X-Series signal analyzers into standard-based transmitter testers, the application provides fast, one-button RF conformance measurements to help you design, evaluate, and manufacture your Bluetooth RF transmitters. The measurement application satisfies the test conditions defined in the Bluetooth Core Specifications to help verify your Bluetooth design with confidence while supporting manufacturing with a single application covering Basic Rate, EDR and Low Energy technologies.

  • On-Wafer Measurements

    Keysight Technologies

    Accurate DC/CV (and RF) statistical modeling of semiconductor devices requires collecting a significant amount of measured data from different wafers across several temperatures. Keysight Technologies recommends IC-CAP WaferPro as a turn-key DC/CV and RF automated characterization solution to help modeling and device engineers achieve more efficient on-wafer measurements across temperature. This new breakthrough solution is based on IC-CAP modeling software and efficiently controls DC/CV analyzers, network analyzers, probers, switching matrixes, and temperature chucks, as well as the powerful 407x and 408x Series of Keysight parametric testers.

  • WLAN 802.11a/b/g/j/p/n/ac/af/ah/ax Measurement Application, Multi-Touch UI

    N9077C - Keysight Technologies

    The N9077C WLAN measurement application is one in a common library of more than 25 measurement applications for the Keysight X-Series signal analyzers, an evolutionary approach to signal analysis that spans instrumentation, measurements and software. The N9077C WLAN measurement application transforms the X-Series signal analyzers into IEEE 802.11 standard-based WLAN transmitter testers by adding fast one-button RF conformance measurements to help you design, evaluate, and manufacture your WLAN transmitter. The measurement application is fully compliant to the IEEE 802.11 series standards, helping you thoroughly test your WLAN design with confidence and support manufacturing with a single application that covers 802.11a/b/g/j/p/n, 802.11ac, 802.11af,802.11ah, and 802.11ax.

  • Utility Card: Boundary Scan Applications

    Keysight Technologies

    With the Keysight utility card, you can integrate boundary scan plug-in solutions into the i3070 or 3070 testhead*.This new feature allows customers to leverage boundary scan solutions that have been developed at R&D and NPI stages into the manufacturing environment. This reduces engineering effort to redevelop tests.Using the boundary scan plug-in card on the Utility Card, the developed boundary scan test can be integrated into the ICT testplan quickly and easily to increase test coverage.* Customers who are currently using the existing i3070 or 3070 series of testers on software versions earlier than 08.00p can enjoy the full capabilities of the Series 5 utility card by upgrading their hardware and software. For more information, please contact us.

  • VACUUM PRESSURE UNIT

    TestVonics, Inc.

    The Vacuum Pressure Unit (VPU) is an 7-inch high (4U), rack-mounted pneumatic device that provides vacuum and pressure as external sources for use with Air Data Calibrators and Testers. The VPU is enclosed in a 7.0 x 19.0 x 14.5 in. case and weighs 18 lbs. The lightweight design allow for ease of handling and may be used on a bench top or mounted into a standard 19-inch wide equipment rack in a repair facility. The operates with 115VAC single phase power. Rear panel fittings allow connection of the VPU pressure and vacuum outputs for convenient operation. Two hoses are provided, one each for vacuum and pressure, with a length of 8 feet each for connecting the VPU to the intended calibrator or test system.

  • Sophisticated Battery Testing Equipment

    SOC Tester.com

    This sophisticated battery test equipment allows the battery tester to exercise and explore the battery’s internal profile and produce a true state of charge revealing the batteries true AHR capacity and ability to perform under load. The 43 second load test application and analysis process has shown to be as reliable as the information derived from a standard 20 hour full battery discharge test. The SOC has simplified the process of testing VRLA, AGM, Gel Cell and all other lead acid battery types, with a fast and accurate testing solution that allows for on the spot and in the field decision making instead of in the office analyzing.

  • Pair Tracing

    Greenlee Communications

    What use is your advanced tester if you cannot identify which wires to connect to? Traditional pair tracers allow you identify wire pairs remotely by applying some form of tone to the wire and using a detector to seek this signal at a remote location. Greenlee produces a wide range of tone generators and detectors from the very simplest, to advanced noise cancelling and highly sensitive types. Please remember that electrostatic wire tracing products cannot detect signals through soil or metallic conduits etc., as such signals are screened and you will need to refer to the "locating" section of this website for suitable products.

  • Audio Control Test Panel

    L-260 - LinAire Engineering, Inc

    The new L-260 Audio Test Panel replaces the old L-240 panel with a greatly improved layout and easier testing procedures. The old L-240 started life as a tester for the KAA-445 audio controller and was added to or modified over the last 20 years in an effort to keep it current. However, with the newer audio controllers it was due for a complete redesign to make both the cable design and testing procedures easier. This new design will save large amounts of time testing the newer as well as the older audio controllers. We all know time is money and replacing your old L-240 panel/harnesses with the new L-260 will pay for itself in a short time.

  • Bit Error Rate Test

    BERT - Optilab, LLC.

    Optilab’s BERT is a cost effective bit error rate tester system. When used as a ParBERT, it outputs 16 channels data pattern, and also acts as the 16 channel error analyzer. The user selectable reference clock allows testing BER at a specific data rate with external clock input or at a pre-defined data rate using the internal clock. Each channel supports data rate up to 3 Gbps. Moreover, a SFI-5 compliant deskew channel provides parallel alignment information between channels. The error detector checks error rate in each data lane and detect channel parallel misalignment up to 15 UI.

  • Transformers Testing

    TTRT 03A S2 - Amperis sl

    The ATRT-03A is Amperis' second generation, microprocessor-based, automatic, three phase, transformer turns-ratio tester. This lightweight, portable, battery-powered unit is designed for testing transformers at utility power substations. The ATRT-03A determines the transformer turns-ratio using the IEEE C57.12.90 measurement method. The transformer turns-ratio (ranging from 0.8 to 15,000) is determined by precisely measuring the voltages across the unloaded transformer windings. To ensure accuracy, the ATRT-03A's measuring circuitry self-calibrates before each measurement. It requires neither adjustment nor temperature compensation. The ATRT-03A's turns-ratio measurement accuracy is 0.1% or better.

  • DC Sources/Sinks For Test Benches

    Heinzinger Electronic GmbH

    DC sources / sinks for testing rigs are a core component in the development, quality assurance and EOL (end-of-line) testing for batteries and power electronics in the domain of e-mobility. The dynamic properties, the combination of high control accuracy, low residual ripple, and a large output voltage range are crucial. This means that, with the DC sources / sinks for testing rigs, users have the ability to efficiently cover high-voltage applications as well as 48-Volt applications with just one testing rig energy system. Various software packages enable the DC sources / sinks for testing rigs to be used as battery simulators or battery testers.

  • ZRS-3H Glow-wire Test Apparatus

    ZRS-3H/ZRS-3HS - Lisun Electronics Inc.

    It is according to IEC60695-2-1, IEC60695-2-10~IEC60695-2-13 (GB/T5169.10-2006~GB/T5169.13-2006), < basic testing methods of Glow wire, basic testing methods of Glow wire device> and UL 746A, IEC829, DIN695, VDE0471, the Glow wire tester ZRS-3H/ZRS-3HS is suitable for resistance to abnormal heat and fire test on lighting lamps, electronic products and household appliances. Adopting high-temperature coating spraying on steel structure and imported instrument display, with easy operation, stable performance the equipment is applicable to flame resistance tests of all levels of QC departments and corresponding enterprises.

  • Handheld Optical Power Meter

    HOPM-3216 - Hangzhou Huatai Optic Tech. Co., Ltd.

    HOPM-3216 Handheld Optical Power Meter is our newly designed fiber optic tester, it aims at fiber network installation, fiber network engineering acceptance and fiber network maintenance. Combined usage with HOMP3116 handheld optical light source, it offers a quick and accurate testing solution on both SM and MM fibers. Compared with usual power meters, the HOPM-3216 has more great functions/features of automatic wavelength identification and switching and intelligent backlight control. Also the HOPM-3216 features good appearance, good touch feeling and considerate humanity design.