Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.

See Also: Test, Testing, Audio Testers, Automotive Testers, Battery Testers, Cable Testers, Component Testers


Showing recent results 4516 - 4530 of 4596 products found.

  • Quickest & Most Convenient Way to Test USB Type-C Cables

    Advanced Cable Tester - Level 1 - Total Phase Inc.

    The Total Phase Advanced Cable Tester - Level 1 is the quickest and most convenient way to test USB Type-C cables. It provides thorough continuity testing, DC resistance measurement for safe operation/reliability, and E-Marker verification. Rapid spot-checking of cables, easy-to-understand reports, and 100% test coverage are now available to casual, laboratory, and production environments at a fraction of the price, setup time, and labor versus any alternate solutions. The USB Type-C cable is the most technically advanced cable available. High voltage and current, coupled with 10 Gbps data rates and numerous wires drive ubiquity and, with it, complexity. Test and validation of cables has always been essential, but with the added risk of fire increasing liability, complete testing of these new cables is more critical than ever. The Advanced Cable Tester enables this essential testing, without expensive scopes, custom fixtures, and highly trained personnel, saving hundreds of thousands of dollars.

  • LED Power Driver ATS

    8491 - Chroma ATE Inc.

    1. DC Electronic Load : Chroma 6310A/6330A Series2. Transducer Unit/Module*1 : Chroma A849101/A849102, A849103, A8491043. Time/Noise Analyzer : Chroma 80611 & 80611N card4. Sytem Controller*2 : Industrial PC5. DC Source: Chroma 62000P Series6. Digital Power Meter : Chroma 66200 Series7. OVP/Short Circuit Tester : Chroma 806128. ON/OFF Controller : Chroma 80613*1 : A849101 transfers UUT output signal to voltage signal, and measure by 84911 LED power driver measurement card (200kHz). The optional 80611N Noise card is required for 20MHz ripplecurrent measurement.*2 : The controller includes both 84911 LED Power Driver measurement card and 84903 control card.- 84911: Measure rms current, dimming current/frequency/duty, timing, power & ripple current (200kHz)- 84903 : Provide BL control signal(DC level, PWM, SM bus), and enable ON/OFF signal.C Source : Chroma 6500/61500/61600 Series

  • 30 Amp Fuse Buddy

    305M - Electronic Specialties Inc.

    *Fuse Buddy Testers can test circuit current up to 30 Amps. *Two 30 Amp models, #305M used with Mini size fuses and #306B used with ATC size fuses. *Blowing fuses? Get the Fuse Buddy, a great new product. *Clever design allows for easy connection into fuse sockets. *30 Amp models have resolution of .1A, while 20 Amp models have .01A resolution. *Fuse Buddy ends are molded into the shape of the fuse itself. *During testing the fuse is removed and replaced into the Fuse Buddy. This way, the circuit being tested maintains fuse protection. *The Fuse Buddy stays put and won't fall out of the socket, like test probes do. 305M & 306B Specifications *Tests circuit current from 0 to 30 Amps/48 Volts *Resolution .1A (100 milliamps), accuracy + 2%

  • Battery discharger

    Nanjing Clean Energy Electronic Technology Co.,Ltd

    This one is for battery with voltage below 20V, if you need for battery 12V/ 24V/ 36V/48V application,you will need to choose another model in our store.FDY10-S Battery tester structural design in reasonable,easy to carry,may detection batterycapacity,can also measure battery discharge time and discharge AH.Comprehensive detectionand measure two function new type measure equipment.Can adaptive from 1V to 20V voltagerange different varieties different types,Measure battery varieties:Ni-Cd, Li-Ion, Pb, Ni-Mh,Ag-Zn, LMP, Li,po, Pb, lead acid batteries... Measure current range from 0.1A to 10A auto constantcurrent,set stop discharge voltage range from 0V to 20V,when discharging LED can real timedisplay battery voltage ,Current,Power, AH and total time.When stop discharge LED display AHand discharge time.

  • Solar Installation Test Kit

    PV210 - Seaward Group USA

    The Seaward Solar PV210 PV installation tester provides a highly efficient and effective test and diagnostic solution for PV systems, carrying out all commissioning tests required by IEC 62446 and performing fast and accurate measurement of I-V curves in accordance with IEC 61829. With direct connection to individual PV modules or strings using the supplied lead sets, tests can be conducted easily and within a matter of seconds at the press of a single button. A high contrast display is clearly visible in direct sunlight and shows open circuit voltage, short circuit current, maximum power point voltage, current and power, as well as the fill factor of the PV module or system under test, and insulation resistance (as part of an auto sequence or a discrete probe to probe measurement). If the measured curve deviates from the expected profile, the PV210 alerts the user to this, identifying the need for further analysis.

  • Switching Power Supply ATS

    8000 - Chroma ATE Inc.

    The Chroma Power Supply Automatic Test system Model 8000 is the ultimate solution for power electronic testing. The system includes a wide range of hardware choice such as AC/DC Sources, Electronic Loads, DMM, Oscillate Scope, Noise Analyzer and Short /OVP Tester. This flexibility combined with its open architecture software platform-PowerPro III, gives users a flexible, powerful and cost effective test system for almost all types of power supply testing. The 8000 test system uses a unique test command optimization technology to prevent repetitive control commands from being sent to the system hardware devices. This improve test speed dramatically and makes the Chroma 8000 an ideal choice for both high speed production applications as well as design verification.

  • Stray Voltage Detector

    LV-5 - HD Electric Company

    The Stray Voltage Detector, model LV-5, is used to detect stray voltage as low as 5 volts which may be present on any electrically conductive surface such as street light poles, guide guy wires, wood transmission poles, meter cans, manhole covers and many other metallic surfaces in and around electrical utilities. This newer LV-5 has a bigger, more robust grip, a brighter LED indication that improves daylight visibility and has a tester built into the holster to quickly test the detector on a known voltage source before and after use. Otherwise it operates the same as the LV-S-5. The Detector operates by holding it with a bare or gloved hand and directly contacting the metal tip of the Detector to the potentially energized source.

  • Micro Ohmmeters

    IBEKO Power AB

    RMO instruments are based on state of the art technology, using the most advanced switch mode technique available today. With over 15 Years in designing and  manufacturing  Micro Ohmmeters, DV Power has established wide range with  16  portable  and  3  handheld  models  of  high-precision micro  ohmmeters. The  range  includes  a  number of portable testers designed for use in tough environments, ideal for use in test facility or out in the field.  To complement the range of units we also have all the accessories you could ever need, ranging from cable clamps to remote control units.The units are  rugged  yet  compact while maintaining  accurate low resistance  measurements. RMO generates a true (ripple free) DC current with automatically regulated test ramps. During the test RMO ramps with increasing current before measuring and decreasing current after the measurement. This approach significantly reduces magnetic transients.

  • Real Time Platform for Machine Data

    RTTK - FishEye Software, Inc.

    RTTK provides real-time X ray-like data access to unlock highly detailed binary data in the language of domain experts. FishEye’s technology captures real-time data in a system’s native binary but uses a unique and innovative Metadata ­Injection process to store the data in an open standards, platform independent, self-describing and high-performance data format. The access exposes internal data that otherwise may not be available to end-users, is distributed over system tasks and computers, or is challenging to collect because of the large volume. System developers can reduce development cost and risk by reducing time spent developing data capture functions, reduce post processing time by eliminating the post processing data conversion step, and quickly assess how the software is performing. Integrators and Testers can use internal data to diagnose problems, verify proper operation, and increase testing automation.

  • ADI Test Fixture

    TA-6500 - Tech-Aid Products

    The TA-6500 test fixture combines the features of the OEM's Instrument Servo Tester(T307962), the Pointer/Flag Test Fixture(T307951) and the AD-650/600 Test Panel(T334043) all into one panel to facilitate testing of these Attitude Director Indicator's. The panel switches and adjustment pots are labeled to match the test procedure numbers and the duplicity in marking makes it easier for the technician to understand each function. The UUT interface is through a 96 pin zero insertion force(ZIF) type connector to minimize contact wear. The expanded localizer and nav input pins J2-34/35 are exposed on the panel to facilitate the insertion of a 200 ohm shunt when required. The fixtures rear panel has connectors for the required dual API/Synchro transmitter interface while the panel switches provide the correct routing of each.

  • Herbal Sensor

    CANNA Dx™ - CDx, Inc.

    Our first sensor, Canna, will enable you to identify the most important chemicals in cannabis and then relate them to how you feel when using that specific chemical combination. By using MyDx™ to detect THC, CBD, and other cannabinoid and Terpene ratios coupled with an extensive database of countless chemical combinations and their associated feelings, you will finally have the ability to find the best chemical profile that works for you all in one convenient, portable THC tester. By doing so, you also join a growing community of users that test and add new chemical combinations and related feelings each week. This is the perfect cannabis analyzer that allows you to do your own THC testing without the need to go to an expensive central laboratory.

  • Intelligence-Driven Data in Motion Analytics

    NikOS Everest - Niksun

    NIKSUN NikOS Everest provides highly flexible, automated views on the data specific to you. No longer is the visualization tied to the data. You have complete freedom to filter, display, visualize, export and even run analytics right within the Everest GUI itself without having to perform ad-hoc special studies to obtain the data you want. Early adopters and testers have attested to NikOS Everest's expert value in the continuously evolving and highly competitive security industry. "NIKSUN NikOS Everest is one of the most robust unified platforms among cybersecurity tools today, providing the ability to render data at every level from a macroscopic view down to each individual packet," said Dr. Peter Stephenson, Chief Technology Editor at SC Magazine. "Not only does NikOS Everest have the ability to pull up this information at rapid speeds, but it also makes it far simpler to view and classify that data than ever before."

  • Instrumentation/Electronics

    Thames Side Sensors Limited

    Junction Boxes for 4 or 8 load cells in ABS, Aluminium or Stainless Steel (optionally with ATEX approval)Intelligent Junction Box for individual monitoring of load cell performance and error checking of up to 4 load cellsSimple weighing transmitters (with analogue output for connection to a PLC) or high speed transmitters with built-in weight indication, external communications, set points and dedicated check weigher functionsPurpose designed weight indicators with external communications, ATEX approval for use in hazardous areas and IP69K protection for use in harsh, wash-down environmentsDedicated weighing controllers for batching, filling, check weighing, truck weighing and axle weighing, with communications and relay outputsInstrumentation/electronics with Weights and Measures approvals (legal-for-trade), i.e. OIML R76 and EN45501:2015 (NAWI)Remote displays for secondary weight indication at a different locationLoad cell tester with intelligent diagnosticsLoad cell simulator

  • Durometers

    PCE Instruments

    The durometers that you will find on our website are used for determining surface hardness. We have a selection of durometers for determining the hardness of metal, plastic, rubber, fabric, etc. These Hardness testers measure theThe Durometers that you will find on our webpages are used for determining surface hardness hardness in Rockwell B, Rockwell C, Vickers HV, Brinell HB, Shore, HS, Leeb HL or in hardness units (DIN ISO). These devices are especially practical in areas of production, quality control and technical service due to their portability. One advantage of a digital durometers is the internal rechargeable battery found in model PCE-1000. This device with integrated refraction impact offers the advantage of taking measurements without the use of cables that can interfere during a measurement.

  • Thermal Imaging System for Electronics Testing

    ETS320 - FLIR Systems, Inc.

    FLIR engineered the ETS320 for thermal testing and analysis in electronic on electronic components and printed circuit boards (PCBs). It combines a high-sensitivity thermal camera with an adjustable table stand to provide consistent, non-contact thermal testing through the entire electronics design, development, and production process. With more than 76,000 points of temperature measurement, the FLIR ETS320 allows users to monitor thermal performance, detect hot spots, and identify potential points of failure during product development. The camera’s measurement accuracy and its ability to visualize small temperature differences help testers evaluate thermal performance, ensure environmental compatibility, and troubleshoot problems for a wide range of components. The rechargeable, battery-powered ETS320 sets up quickly and easily, so product developers can have an immediate, real-time view into the thermal performance of their designs. The unit comes fully assembled and ready to connect to a PC running FLIR Tools+ software for detailed data analysis, recording, and reporting.