Filter Results By:

Products

Applications

Manufacturers

Testers

find the limits of a design.

See Also: Test, Testing, Audio Testers, Automotive Testers, Battery Testers, Cable Testers, Component Testers


Showing recent results 1216 - 1230 of 4753 products found.

  • Loudspeaker Cable Testers

    EMO E450 - EMO Systems Canford Audio PLC

    The EMO E450 cable tester will test for continuity, cross connection, and open circuit in cables fitted with NL8FC 8-pole and NL4FC 4-pole Speakon connectors, 3-pin XLR connectors, and 2 or 3 pole A-gauge jacks. EP retrofit kits are available to allow cables fitted with EP 4, 5, 6, or 8 pin connectors to be tested. The EP connectors fit in two pre-punched holes on the rear of the tester accessed by removing the blanking panel. The kit's flying leads plug directly into connectors mounted on the tester's PCB.

  • Underground Cable Fault Tester

    UCT-8 - HD Electric Company

    The Underground Cable Fault Tester, model UCT-8, is a lightweight, one-piece operation for underground DC leakage current testing. This tool is used to test the de-energized primary shielded voltage cable for a fault. Test results are clearly displayed as an analog bar graph along with an indication of a good or faulted cable. A self-contained 8kV high voltage source powers the tester using a 9V lithium battery, making the UCT-8 a compact single hotstick operation tool for testing cable.

  • Uniaxial Powder Tester

    UPT - Freeman Technology

    The Uniaxial Powder Tester (UPT) is a unique stand-alone uniaxial shear tester for simple, sensitive and cost effective powder characterisation. The instrument delivers repeatable and reliable measurements, providing a robust alternative to traditional powder testing techniques.Uniaxial testing first involves the construction of a consolidated powder column. This is then removed from its confining sleeve before being fractured through the application of a vertical stress, directly measuring the uniaxial Unconfined Yield Strength (uUYS). This technique can therefore be used to assess and rank powder flowability.

  • Testers with Cards Reader

    Eurostat Group

    • Measured values on LCD display (61-200-0006)• Identification by RFID badge• Independent / network working• Complete test of simple and double conduction wrist straps• Software controlled digital calibration of tester• Advanced personnel management (transmission of test reports by email, passing authorization by area…)• Universal software can manage all types of testers• 4 test modes: wrist strap only / foot only / both wrist strap and foot / wrist strap or foot?• 9 LEDs for test results indication

  • Torque Tool Testers

    Series TT02 - Mark-10 Corp.

    Series TT02 Torque Tool Testers present a simple and accurate solution for testing manual, electric, and pneumatic torque screwdrivers, wrenches, and other tools. These testers are compact and rugged, suitable for production environments. A universal 3/8” square receptacle accepts common bits and attachments. The TT02 captures peak torque in both measurement directions, and also calculates 1st and 2nd peaks, useful for click-type tools.

  • Telephone Line Tester

    Line-Bug 4 - Triplett

    The Triplett Line-Bug 4 is a simple tester to determine if there is damaging telephone line current on RJ-11 and RJ-45 lines. Some LAN lines have telephone current on previously unused pairs. Pre-testing LAN lines with the Line-Bug 4 before testing with a LAN Tester may prevent damage to it. Checks RJ45 connections wired for 568A/B or USOC pinouts. Tests 1-, 2-, 3- and 4-line jacks.

  • Smoke and Heat Detector Tester

    TESTIFIRE 1001 - SDi

    Testifire is the world's first multi-stimulus detector tester for smoke, heat and CO fire detectors. It enables faster and more efficient testing of both single and multi-sensor detectors. There are two models available Testifire 1000 for testing smoke and heat and Testifire 2000 for testing smoke, heat and CO. Testifire is the result of several years of technological development and as a result is by far the most advanced tester available. Testifire is UL certified and is approved by leading detector manufacturers from around the world.

  • Signature Model Surge Testers

    SP - PJ Electronics, Inc.

    Surge / DC Hi-Pot testing capabilities. Tektronix TDS1002, 1 Billion Samples/sec, real time, programmable, storage oscilloscope plus a DC Hi-Pot Tester. DC Hi-Pot testing with dual LED panel meters that display direct read out of current and voltage, with overcurrent safety trip. This dual tester combo is still capable of testing 3 phase motors with or without rotors.

  • Surface Flash Tester

    TF313 - TESTEX Testing Equipment Systems Ltd.

    Surface Flash Tester. The rapid spread of flame over the surface of the material without ignition of its basic structure, usually applied to pile or fur fabrics. This flammability tester is safe and easy to operate, Swivelling butane burner is traversed across the face of the fabric to determine whether surface flash occurs and to record any damage to the base fabric

  • SF6 Density Meter Tester

    JHMD-1 - Xiamen Jiahua Electrical Technology Co.,Ltd

    JHMD-1 is a smart tester. By using high accuracy core units, pressure sensor, A/D, D/A transducer, 32 bit ARM MCU and TI company's high speed signal chip, it can automatically calibrate the density relay, measure pressure at signal activity temperature, convert pressure from any temperature to 20 standard pressure, print test data and save for review. It identifies the fault during the test. The whole procedure is under automatically operation, JHMD-1 is a high accurate, high stable, reliable tester.

  • S-GW Functional Tester

    Polaris Networks

    The LTE SGW Functional Tester provides a wrap-around test solution for the Serving Gateway by emulating all the LTE network elements surrounding the SGW (System Under Test). The S-GW Functional Tester emulates an LTE eNodeB and other Core Network entities such as the MME, P-GW, S-GW, RNC and SGSN. It tests the S1-u, S11, S5/S8 , S12 and S4 interfaces of the S-GW.

  • Shoes and Wrist Strap Tester

    Eurostat Group

    • Our economical version of a shoes & wrist strap tester for mobile use or wall mounted• Compatible with all types of connection: 7 / 10 mm studs, banana or GSGS plugs (4.5mm studs in option)• Indicates whether resistance is too low or too high (no separate test between shoes and wrist strap)• Works with batteries supplied with the tester• Low battery indicator

  • Short Span Compression Tester

    17-36 - Testing Machines, Inc.

    The 17-36 Short Span Compression Tester measures the compression strength of paper and board. The span or gap is set to a distance between 0.3-0.7mm. When performing a compression test on such a short distance, the stability of the clamps and instrument are critical. The 17-36 Short Span Compression tester incorporates a precision mechanical design to reduce frictional errors, providing unmatched accuracy and repeatability.

  • Digital Rockwell Hardness Tester

    ROCKY Series - Qualitest International Inc.

    The Rocky Series of Digital hardness testers are our low cost option for accurate and simple Rockwell Hardness testing which meet and exceed ASTM E-18 requirements. Available in two versions Rocky-DR Regular Rockwell or Rocky-DS Superficial Rockwell, these advanced and highly accurate hardness testers are ideal instruments for both lab environments as well as production floor.

  • Digital Rockwell Hardness Tester

    900-367 - Phase II Plus

    This digital Rockwell hardness tester with fully automated load/unload procedures affords highly sensitive and accurate readings. Micro computer controlled Touch Screen with USB output to PC. The 900-367 digital Rockwell hardness tester offers programmable scale conversions, dwell times, statistical capabilities and test counter. Capable of testing in all of the regular Rockwell hardness scales.