Filter Results By:

Products

Applications

Manufacturers

Showing results: 7246 - 7260 of 8519 items found.

  • PCI High Density Pecision Resistor Card, 18-Channel, 2Ω To 239Ω

    50-298-013 - Pickering Interfaces Ltd.

    The 50-298-013 is a high density programmable resistor card with 18 channels which can be set between 2Ω and 239Ω with 1Ω resolution The 50-298 range provides a simple solution for applications requiring accurate simulation of resistive sensors. The 40-298 is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.

  • PCI High Density Pecision Resistor Card, 18-Channel, 2Ω To 470Ω

    50-298-014 - Pickering Interfaces Ltd.

    The 50-298-014 is a high density programmable resistor card with 18 channels which can be set between 2Ω and 470Ω with 2Ω resolution The 50-298 range provides a simple solution for applications requiring accurate simulation of resistive sensors. The 40-298 is available in a variety of resistance ranges and resolution capabilities that meet the needs of most functional test systems. It is particularly well suited to applications such as the testing of engine controllers where resistive sensors provide information on parameters such as temperature.

  • Wireless Connectivity and IoT Test System

    IQxel-M4W - LitePoint Corporation

    Suitable for the lab or manufacturing environment, the IQxel-M4W 6G is ideal for RF testing of wireless connectivity and IoT products. The platform’s flexible software supports the most prevalent wireless connectivity standards: WLAN 802.11ax (Wi-Fi 6) and legacy (802.11a/b/g/n/ac), Bluetooth® Classic and Low Energy (Bluetooth® LE) as well as Zigbee/Thread, Z-Wave, LPWAN technologies (Sigfox, LoRa) and cellular IoT technologies (NB-IoT, LTE-M, 5G) as well as navigational technologies.

  • Tunable Notch Filters

    Ranatec Instrument AB

    The Ranatec Tunable Notch Filters are critical tools for adaptation to stringent new ETSI/3GPP conformance test specifications for mobile device radio properties, that covers all sub-6 mobile bands and channel bandwidths for 2G/3G/4G/5G. Designed for formal conformance testing performed by accredited test houses, as well internal verification by mobile device vendors. A flexible and easy to use test automation platform to support almost any ambition level, tailored to your demands.

  • Concrete Water Impermeability Tester

    Qualitest International Inc.

    The concrete water impermeability testing system is designed with many different standards in mind including DIN 1048, ISO/DIS 7031, EN-12390-8 & UNI 9533. This impressive piece of machinery comes in different models with either 3 or 6 measuring points and with or without quantitative measurement of water permeability. The supporting structure is very stable and is at a convenient height to allow the easy access. The pans are made out of stainless steel, the specimens are easy to insert due to the clamping device.

  • 5-in-1 Environmental Meter

    Extech 45170CM - Extech Instruments Corporation

    The 45170CM is a convenient 5-in-1 Environmental Meter which measures Air Velocity, Air Volume, Humidity, Temperature and Light. Ergonomic housing design with a large dual "smart" LCD where characters on display reverse direction depending on the function in use. This multi-functional meter is ideal for professional or home use in testing the environmental quality in a building. Featuring Data Hold, Min/Max, Auto Power Off functions. Complete with built-in sensors, wrist strap and 9V battery.

  • EMI Receiver System

    EMI-9KC/EMI-9KB - Lisun Electronics Inc.

    EMI-9KB is an automatic EMI receiver system. It is a main test system for EMI (Electro Magnetic Interference) testing. The EMI-9KB is produced by the full closure structure and strong electro-conductibility material, which has high shielding effect. Due to the new technology for the EMI Test System, it solved the instrument self-EMI problem. The test results are according to the international format test report. The EMI Test System EMI-9KB fully meets CISPRl6-1, GB17743, FCC, EN55015 and EN55022.

  • Partial Discharge Measuring System

    PD - Shanghai Jiuzhi Electric Co., Ltd.

    Partial discharges (PD), as defined by IEC60270, are localized dielectric discharges in a partial area of a solid or liquid electrical dielectric insulation system under high-voltage field stress. It can be caused by discontinuities or imperfections in the insulation system. PD testing thus gives an indication of deterioration of the insulation and is an indicator of incipient faults. In general PD will occur in systems operating at voltages of 3000 V and above; it should be noted though that in some cases PD can also occur at lower voltages.

  • 50 MHz 32-CH High-Speed Digital I/O Card

    PCIe-7350 - ADLINK Technology Inc.

    ADLINK's PCIe-7350 is the advanced version of hot-selling PCI/PCIe-7300A featuring high-speed digital I/O with 32-channel bi-direction parallel I/O lines. The data rate can achieve up to 200 MB/s through the x1 PCI ExpressR interface. The clock rate can support up to 50 MHz internal clock or 100 MHz external clock, which is ideal for the applications of high-speed and large-scale digital data acquisition or exchange, such as digital image capture, video playback and IC testing.

  • Switch Mainframe

    SW1002 - HIOKI E.E. Corp

    Switch between voltmeter and battery tester while testing. 264 channels max. (2-wire) to 72 channels max. (4-terminal pair). Circuit design friendly for impedance measurements that minimize errors between channels (Effect: 0.01% f.s.*). For BT4560 100 mΩ range, R measurements, and a measurement frequency of 1 kHz. For OCV measurement, internal resistance measurement, and external potential measurement of battery cells. Measure battery modules up to 60 V DC.

  • Video Surveillance Storage and Content Management

    EditShare

    QScan is a family of fully-featured Automatic Quality Control (AQC) systems, engineered to unobtrusively check the integrity of media files at user-definable points in a production workflow. QScan goes beyond regular QC solutions, offering comprehensive video and audio analysis. QScan is powered by the award-winning Quales AQC engine and can be used to provide compliance for file-based content delivery to any global standard. With built-in templates for common standards, the compliance testing process is extremely quick and easily managed.

  • VAW Meters (Performance Test)

    Premier Electrosystems

    VAW meters indicate the voltage, current, wattage among other parameters that are crucial for testing of any product.Introduction of composite Volt-Amp-Watt Meters by Premier Electrosystems in 1985 has been a runaway success; mainly due to their performance and reliability. Premier Electrosystems have been the pioneers of multi parameter meters i.e. Voltage, Current, Wattage, Kilo Watt hour, Frequency, Power Factor, Run hour, Load hour, 13 level THDs in a single meter

  • TamoSoft® Throughput Test

    TamoSoft

    TamoSoft Throughput Test is a utility for testing the performance of a wireless or wired network. This utility continuously sends TCP and UDP data streams across your network and computes important metrics, such as upstream and downstream throughput values, packet loss, and round-trip time, and displays the results in both numeric and chart formats. TamoSoft Throughput Test supports both IPv4 and IPv6 connections and allows the user to evaluate network performance depending on the Quality of Service (QoS) settings.

  • Test Adapter

    TOPTEST GmbH

    Development of a 12-way test and programming adapter from Toptest for ?? The Dash ?? from Bragi, a wireless, intelligent earphone with communication and sensor technology. With the first version of the test adapter, only a purely sequential testing was possible due to the interdependencies of the tests. In version 3.0, the now autonomous tests were brought into a parallel TestStand sequence. In addition, individual sockets were prioritized in order to optimally use the hardware resources. This resulted in a time advantage of 80% compared to the initial situation.

  • Validator Torque Wrench Tester

    Mountz Inc.

    The Validator is designed for testing and calibrating torque wrenches. This tool is not suitable for power tools. Ideal for checking torque tools on production floor daily or weekly to ensure the tools aren't falling out of calibration. Using a quality torque tester makes a safer world through accuracy and precision. Measuring torque is essential for companies to ensure their product’s quality, safety and reliability isn’t compromised. The failure of a three-cent fastener that isn’t properly tightened can lead to catastrophic or latent failures.

Get Help