Filter Results By:
Products
Applications
Manufacturers
Vision Sensors
An image sensor combined with a processor for base visual acuity.
-
product
Event Based Image Sensors
EVS
Event-based Vision Sensors (EVS) help alleviate this issue by only sending data from pixels who have detected a change in intensity. This allows them to minimize the volume of data that is transmitted over the sensor’s data bus while minimizing the processing resources need to analyze the image. On top of this, individual pixel autonomously responds to illuminance changes allowing the sensor to detect small and/or high frequency changes with lower bandwidth requirements.
-
product
GMSL3
FRAMOS is the first company in the market to integrate Analog Devices’s new GMSL3 technology into an embedded vision environment. GMSL3 can transmit high frame rates (4K, 90 fps) as far as 14 meters with unprecedented efficiency. This interface is well suited for applications where the MIPI CSI-2 (D-PHY) length restrictions are not sufficient, while at the same time, a highly durable cable with low power consumption and low cost are essential. Camera developers can use the flexible FRAMOS Sensor Module Ecosystem to validate a variety of image sensors in the lab and in the field while taking advantage of the interface’s features.
-
product
High Performance Machine Vision Cameras
Goldeye
High-performance machine vision cameras with advanced features for demanding applications. QVGA and VGA Resolution. InGaAs sensors. Up to 344 fps. Spectral range 900 - 1700 nm (SWIR).
-
product
Industrial Vision
Image processing is one of the most crucial and challenging sensor technologies of the future. Until recently, integrating vision sensors into practical applications was difficult and extremely expensive. Today, vision sensors can be implemented in a wide variety of industries and applications, offering cost advantages over standard solutions in difficult sensing environments.
-
product
Machine Vision Camera - 0.4 MP, 121 FPS, Sony IMX297, Mono
Firefly S
The FLIR Firefly® S delivers the essential machine vision features you need in an ultra-compact body. Its small size, low power, and light weight make it ideal for embedding into portable devices. The Firefly S provides amazing value by combining powerful on-camera features with the latest CMOS sensors.
-
product
Machine Vision Camera - 1.3 MP, 60 FPS, e2v EV76C560, Color
Flea3 USB3
The Flea®3 line of USB3 Vision, GigE Vision and FireWire cameras offers a variety of CMOS and CCD image sensors in a compact package. The Flea3 leverages a variety of Sony, ON Semi, and e2v sensors ranging from 0.3 MP to 5.0 MP and from 8 FPS to 120 FPS. For FLIR GigE and USB3 cameras with the latest sensors and most advanced feature sets, please refer to our Blackfly S and Oryx camera families.
-
product
Machine Vision Lens
FUJINON HF6XA-5M
This new product, which has an external diameter of 39 mm and a focal length of 6 mm, is the world's smallest* Machine Vision lens which is used for industrial processes such as product inspection and measurement on production lines. HF6XA is a new lens which is designed for compatibility with 2/3" sensors with a pixel pitch of 3.45m (five megapixels). HF6XA is a FUJINON Machine Vision lens designed for compatibility with 2/3" sensors, which has coverage of approximately twice*** the current product, the FUJINON HF8XA, which offers the widest coverage range. In the frequently used environments of customers, the lens is compatible with the ultra-high resolution of 3.45m pixel pitch (equivalent to five megapixels when using a 2/3" sensor) under a large portion of the screen. Furthermore, for a wide range of installations and shooting conditions, the lens boasts "4D High Resolution"*4 performance, mitigating resolution degradation that typically occurs when changing a shooting distance or aperture value and maintaining a high level of even image sharpness across the entire image area at the ultra-high resolution of 4.4m pixel pitch (equivalent to three megapixels when using a 2/3" sensor). Despite being a wide-angle 6mm lens, the lens achieves the world's smallest external diameter of just 39 mm. The lens is ideal for attachment inside compact inspection devices with restricted internal space when wide coverage and consistency is required for reading product codes and serial numbers or for inspecting product shape and appearance.
-
product
Sensors
Detect your environment with various sensors. Motion, sound, vision, temperature, and more. 203 products.
-
-
product
3-CMOS & 3-CCD prism-based RGB Area Scan Cameras
Apex Series
JAI’s prism-based R-G-B cameras separate the incoming light into red, green and blue wavelengths, which are directed to three separate image sensors. The cameras deliver exceptionally accurate R-G-B raw image data ideal for demanding color machine vision applications across a range of industries including pharmaceutical, electronics, printing/packaging and imaging in microscopy and medical diagnostics equipment.
-
product
Vision Sensor
Leuze electronic GmbH + Co. KG
Vision sensors are suitable for compartment fine positioning and for code reading. The sensors for compartment fine positioning detect markers in single- or double-depth shelves. During code reading, the camera-based devices reliably identify 1D or 2D codes on objects.
-
product
2D Vision
SICK offers a powerful vision sensor portfolio designed to manage challenges in all industries where a standard sensor would not work. These vision sensors provide a full toolset for positioning, inspection, measurement and reading, depending on the variant. A flexible optical design fulfills the needs of almost all applications. Simplicity is ensured by automatic setup, intelligent algorithms and a common, intuitive user interface.
-
product
2D Vision Sensors
*Easy integration in the application*Compact and robust housing*For use as a stand-alone device*Intuitive, user-friendly handling
-
product
3D Image Processing Software
EyeVision
EyeVision is the base for numerous measurement and inspection tasks in image processing. Features are: Creation of inspection programs with drag and drop function. EyeVision supports all hardware platforms such as; Smart Cameras, Vision Sensors, PC & Embedded support.
-
product
Light Metering System
Isolight
Peripheral Vision has developed the Isolight and Isolight Color light metering systems. The Isolight combines four photopic light sensors, a 100-LED chaser display, a flexible chart holding system, and multiple mounting options. The Isolight Color replaces the Isolight's luminance-only sensors with four full-color RGB sensors for measuring both illumination color and brightness. Both the Isolight and Isolight Color will greatly accelerate image quality testing and enhance the accuracy of your measurements.
-
product
Piezoelectric Testing
Radiant Technologies, Inc. specializes in the measurement of electrical and piezoelectric properties of non-linear materials. The Piezoelectric Task captures a sample's displacement as a function of voltage profile along with the sample's polarization response. An external displacement measurement instrument must be attached to a Radiant Precision Test System to make this measurement. All of the Radiant testers are equipped with a high-impedance voltage input to capture the output of a displacement sensor. Every Vision measurement task will collect data from that sensor input simultaneously with the measurement being executed. Radiant's test systems work easily with displacement sensors which include:
-
product
Embedded Vision
In the industrial environment, especially in digitalized, automated production scenarios, more and more so-called embedded systems are being used. Embedded devices are small, with compact dimensions, highly efficient, and generate little waste heat. Therefore, they are also suitable for limited space conditions. Due to often harsh environmental conditions, they must be particularly robust and resistant to external influences like massive dust accumulation, strong vibrations, and high humidity or even direct contact with water. Typically, embedded devices are handhelds, smartphones, tablets, vision sensors, smart cameras, smart sensors and single board computers. If the systems have integrated machine vision software, they can be used for a wide range of image processing applications. This is known as embedded vision.
-
product
Pregius Global Shutter CMOS USB 3.1 Gen 1 Camera
Lt545R
The Lt545R camera uses the high performance global shutter CMOS IMX250 sensor from Sony for optimal image output while operating at very fast frame rates. The Lt545R provides the fastest full resolution images possible from the Sony Pregius® sensors when coupled with Lumenera's proven and reliable USB 3.1 Gen 1 technology. Image captures can be synchronized using either a hardware or software trigger. FPGA enabled performance, complemented by onboard memory for frame buffering, ensure dependable and reliable image delivery even in the most demanding machine vision systems.
-
product
Pregius Global Shutter CMOS USB 3.1 Gen 1 Camera
Lt1245R
The Lumenera Lt1245R uses the Sony Pregius® IMX253 sensor which is the largest of Sony’s global shutter CMOS sensors. With FPGA performance, onboard frame buffering, and Lumenera’s advanced image processing technology, the Lt1245R delivers high resolution images from a camera with a small form factor. This makes the Lt1245R ideally suited for machine vision, life sciences, UAV, and ATI applications.
-
product
Pregius Global Shutter CMOS USB 3.1 Gen 1 Camera
Lt-C/M4040
The Lt-C/M4040 uses the Sony Pregius® IMX253 sensor which is the largest of Sony’s global shutter CMOS sensors. With FPGA performance, onboard frame buffering, and Teledyne Lumenera’s advanced image processing technology, the Lt-C/M4040 delivers high resolution images from a camera with a small form factor. This makes the Lt-C/M4040 ideally suited for machine vision, life sciences, UAV, and ATI applications.
-
product
Pregius Global Shutter CMOS USB 3.1 Gen 1 Camera
Lt-C/M2450
The Lt-C/M2450 camera uses the high performance global shutter CMOS IMX250 sensor from Sony for optimal image output while operating at very fast frame rates. The Lt-C/M2450 provides the fastest full resolution images possible from the Sony Pregius® sensors when coupled with Teledyne Lumenera's proven and reliable USB 3.1 Gen 1 technology. Image captures can be synchronized using either a hardware or software trigger. FPGA enabled performance, complemented by onboard memory for frame buffering, ensure dependable and reliable image delivery even in the most demanding machine vision systems.
-
product
Image Sensors for Demanding Outdoor Camera & Industrial Machine Vision Applications
Onyx
Teledyne e2v’s Onyx family of image sensors are designed for the most demanding outdoor camera and industrial machine vision applications, where illumination budgets are restricted or where high-speed inspection is required. Teledyne e2v’s new Onyx EV76C664 is a 1.3 million pixel CMOS image sensor for low light applications. It has been designed using e2v’s advanced CMOS imaging technology and is ideal for many different types of application where premium performance imaging is required.
-
product
Turnkey Optical Modules
Optimom
Accelerate your development and focus on your true added value with Optimom™, a new range of turnkey image sensor modules, that can be instantly integrated into vision-based systems. Optimom modules are complete board-level vision extensions which comprise of our proprietary image sensors, a compact board, standard connectors, and optional embedded lenses in various options.
-
product
Electronics
We develop and deliver a wide range of advanced technologies for the commercial and military electronics markets. Our portfolio includes flight and engine controls, electronic warfare and night vision systems, surveillance and reconnaissance sensors, mobile networked-communications equipment, systems integration, and environmentally friendly energy management systems.
-
product
Dynamic Range Systems
For use in R&D by the satellite community and other applicationswith the most demanding imaging requirements Cameras and sensors >16bit, Actual -27bit (167dB) Full day light down to night vision radiances High, medium and low resolution options Remote access and maximum automation Low uncertainty and high precision Tungsten halogen spectrum
-
product
Computer Vision and Visualization
Fraunhofer Institute for Telecommunications
The Computer Vision and Visualization Department consists of three research and development groups working on innovative technologies in the field of monocular, stereoscopic and multichannel video processing. It covers the entire processing chain from original capture to rendering, with a focus on advanced 2D and 3D analysis, post-production synthesis, computer vision, image understanding, human-machine interaction, and immersive media , The department also has expertise in processing complex systems consisting of multiple cameras, sensors, displays, projectors or screens.
-
product
photonHiRES
The especially sensitive and high-resolution cameras belonging to the photonHiRES platform are the leading solution when it comes to achieving the highest resolution in industrial machine vision. Even when faced with challenging applications and poor light conditions, the cameras from Photonfocus achieve the best possible results. The robust housings are equipped with an outstanding temperature management system and enable fan-free operation of even large sensors. Moreover, the powerful 10 GigE Vision interface guarantees an optimum data transmission rate and compatibility with a wide range of interfaces.
-
product
Machine Vision Camera - 1.6 MP, 78 FPS, Sony IMX273, Color
Blackfly S Board Level
The FLIR Blackfly Board Level variants are high performance, machine vision, area scan cameras designed for embedding into tight spaces. Unlike many board level cameras, it boasts a rich feature set applied to the latest CMOS sensors; the same feature set as the cased version. It is ready for integration with proven compatibility with popular SBCs and SOMs. The Blackfly S board level models enable OEMs to develop smaller, lighter, and lower cost solutions with embedded system connectivity and rich features.
-
product
Fast Speed Models (PCI Cameras)
xiB 64
*High-speed interface with a bandwidth of 64 Gbit / sec*CMOSIS sensor: CMV12000*Luxima sensors: LUX13HS, LUX19HS, LUX160*Gpixel sensors: GMAX0505, GMAX3265*Resolution from 1 Mpix to 65 Mpix*Speeds from 333 Fps to 3500+ Fps*Suitable for OEM customization and Embedded vision systems*Distances up to 300m over fiber-optic cable*Compact housing: 60 x 70 x 55 mm
-
product
Fanless Embedded System With LGA1151 9th/8th Gen Intel® Core™ I7/i5/i3 & Celeron® Processor, 4-CH PoE And MXM 3.1 Type A
eBOX671-521-FL
The eBOX671-521-FL is a GPU computing embedded system that comes with 4-CH PoE and MXM 3.1 Type A slot for applications in machine vision, edge computing, traffic vision, deep learning, and artificial intelligence of things. The outstanding eBOX671-521-FL with enhanced GPU computing performance is powered by the 9th/8th gen Intel® Core™ i7/i5/i3 processor with up to six-core, Intel® Pentium® processor, or Intel® Celeron® processor and comes with Intel® Q370 or optional Intel® C246 chipset. The fanless embedded GPU-based system is equipped with dual DDR4 ECC/non-ECC SO-DIMM slots for up to 64GB of system memory. The embedded vision system has an optional MXM type A slot for NVIDIA GTX1030 and GTX1050 graphics modules to enhance the performance of the visual display. Furthermore, this Intel® Coffee Lake-based embedded box PC is specially designed with four Gigabit 802.3at (PoE, Power-over-Ethernet) compliant Ethernet ports with a total power budget of 60W, six USB 3.1 ports and two Gigabit LANs to connect different devices or sensors. It comes in great expansion possibilities, including one internal MXM 3.1 type A connector, two full-size PCI Express Mini Card slots and two SIM slots. For storage, it has two swappable SATA HDD drive bays with a height of up to 9.5 mm and one mSATA for RAID 0 and 1 feature. Besides, we have designed a flexible I/O window slot for incorporating application-oriented I/O functions to meet the requirements of various cases. This embedded vision computer can be mounted using wall or DIN-rail mounting for versatile use in various environments.
