Showing results: 2521 - 2535 of 6572 items found.
-
BTM-15 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester Analog , Capacity of battery:100Ah, Rated test voltage:6/12 v, Voltage accuracy:+/- 0.2 v, Test cycle:10 seconds
-
BTM-36 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester Analog , Capacity of battery:160Ah, Rated test voltage:12 v, Voltage accuracy:±3% F.S. Test cycle:10 seconds
-
BTM-16 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester Analog , Capacity of battery:70Ah, Rated test voltage:6/12 v, Voltage accuracy:+/- 0.2 v, Test cycle:10 seconds
-
BTM-20 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester Analog , Capacity of battery:100Ah, Rated test voltage:6/12 v, Voltage accuracy:+/- 0.2 v,Test cycle:10 seconds
-
BTM-31 -
Hutz Auto & Air Nanjing Ltd.
Battery Load Tester Analog , Capacity of battery:160Ah, Rated test voltage:12 v, Voltage accuracy:±3% F.S. Test cycle:10 seconds
-
DLV50 -
Explorer Technology Group (ETG)
Automatically measure, time-stamp, store voltages in less than 1 second Immediate audio and visual out-of-tolerance indication View/edit last 5 readings with out-of-tolerance indication Record in either 8 strings of 256 or 20 strings of 48 format Color-coded out of tolerance indication Set threshold limits via PC interface for each mode and/or string Statistical analysis (sum, average, max/min readings with cell number) Graphical analysis (color-coded bar graphs: Voltage, SG and Temp.)
-
Analog Devices Inc.
Differential amplifiers allow the process of single-ended input to complementary differential outputs or differential inputs to differential outputs. These amplifiers feature two separate feedback loops to control the differential and common-mode output voltages. Analog Devices fully differential amplifiers are configured with a VOCM pin, which can be easily adjusted for setting output common-mode voltage. This provides a convenient solution when interfacing with analog-to-digital converters (ADCs). ADI also offers a series of differential receiver products that convert differential input signals to single ended output.
-
Bierer & Associates, Inc
The HI Pot Device is designed to Hi Pot de-energized 15kV class cables. The tool transforms 18 Volts from the battery to approximately 8,000 volts DC. When the battery is installed and the safety switch is in the closed down position, the unit is in voltage detection mode. The unit should be in this position when installing the device, as it will sound a warning alarm if you approach an energized source. When the safety switch is lifted and the toggle switch is switched up, the unit is in the Hi-Pot mode and the high voltage DC is being applied.
-
Mountz Inc.
Intended for low and high voltage applications where torque is critical, Mountz insulated torque wrenches protect their operators in both low and high voltage situations. Essential for worker safety, insulated torque wrenches also improve work quality and productivity by preventing product damage due to arcing or shorting. Applications for linemen and electricians include a wide variety of live electrical situations, such as uninterrupted power supply repair. Mountz insulated torque wrenches meet IEC 6900 standards, keeping your workers safe.
-
PU 187.21 -
Metra Blansko a.s.
Instrument PU 187.21 MEGMET 1000 D is intended for measurements of the insulation resistance up to 20 GΩ and the resistance of protective conductor up to 2 kΩ, its length; it can be used for checking the over-voltage protections. It also measures DC / AC voltage up to 1000 V and the temperature within the range -20 °C ÷ 120 °C, with a connected external sensor within the range -50 ÷ 850 °C. Nominal measuring voltages for the insulation resistance measurements are 50, 100, 250, 500, and 1000 V.
-
PQM-702 -
Sonel S.A.
*Power to the analyzer is supplied from tested mains (internal power supply) and is used in all types of networks from 64 V to 760 V.*With particular emphasis on measurements at low voltage poles, due to the ease of connection.*Has an independent power supply socket, especially suited for voltage measurements for transformers and DC circuits.*Remote control and data transfer through a built-in GSM modem (GPRS).*Anti-theft feature - SMS notification in the event of position change - built-in GPS receiver.*Real-time clock synchronized to GPS protocol.
-
ACS723 (Low Current) -
SparkFun Electronics
The low current version of the SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for low to moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!
-
Mors Smitt Group
A Timer Relay is a combination of an electromechanical output relay and a control circuit. The contacts will open or close before or after a pre-selected, timed interval. Time delay relays are initiated or triggered by one of two methods:*Application of input voltage/auxiliary supply will either initiate the unit or make it ready to initiate when a trigger signal is applied. *Applying a trigger signal is used to initiate the unit after input voltage has been applied. This trigger signal can either be a control switch (dry contact switch) or a power trigger (voltage).
-
HV200/5 -
Anfatec Instruments AG
The HV200/5 is a high-precision HV-amplifier designed for the control of tube scanners. It takes three input voltages In X, In Y and In Z (-10 V to + 10 V), amplifies them separately (input gain switches: x1, x2, x5, x10, x20) and adds an offset voltage between -10 V and +10 V. In a 2nd stage, the signal is amplified by a factor of 20. This enables its use as HV amplifier in scanning image acquisition applications, such as STM or AFM, with the capability to shift the scan range in high resolution imaging.
-
40-132-202 -
Pickering Interfaces Ltd.
Pickering Interfaces 40-131/132 modules are a range of low cost, general purpose electromechanical relay cards. They are capable of switching voltages up to 300VDC/250VAC and current up to 2A. They are suitable for use where reed relay based switching cards do not have sufficient voltage or current carrying capability. Applications include the switching of medium power AC and DC loads, or slave switching larger relays, contactors or solenoids. Connections are made to the card via a front panel mounted 78 pin D-Type connector plug.