Filter Results By:

Products

Applications

Manufacturers

Showing recent results 526 - 540 of 1012 products found.

  • Leak Noise Level Logger

    FSJ-1 - Fuji Tecom Inc.

    To use Fuji Leak Noise Level Logger FSJ-1, FSB-8D leak survey tool is necessary.The FSB-8D electric listening stick is “Rod Based” acoustic listening instrument for listening for water leaks at meters, valves and hydrants.

  • Sludge Density Meter

    SD-40 - JFE Advantech Co., Ltd.

    Type SD-40 detects the density of sludge discharged from sedimentation tank and concentrators, in sewage treatment plants and water works. It achieves the accurate observation of sludge density, and helps to control the discharge of sludge.

  • Liquid sensors

    STM Sensors, Inc.

    Based on our unique microoptical precision components we produce sensors for the detection of liquids in transparent tubes or containers. Level- and tube sensors, water sensors or microsensors for fluid channels and capillaries.

  • Load Pull Test Fixtures

    Maury Microwave Corporation

    Low Insertion Loss for High VSWR TuningMultiple Connector Configurations50Ω and Transformers (Klopfenstein, Quarter-wave) AvailableHeatsinks and Fans AvailableCooling (Water cooling, Forced air cooling) AvailableIntegrated Biasing Available

  • Waterproof Conductivity Tester

    C65 - Milwaukee Instruments

    These instruments are designed for all applications. It's IP65 Waterproof casing and replaceable electrode make them suitable also for heavy duty applications, such as Waste Water treatment and Agriculture. The modular design allows easy electrode and battery replacement.

  • Moisture

    COSA Xentaur

    Moisture refers to the presence of a liquid, especially water, often in trace amounts. Small amounts of water may be found, for example, in the air (humidity), in foods, and in various commercial products. Control of moisture in products can be a vital part of the process of the product. There is a substantial amount of moisture in what seems to be dry matter. Ranging in products from grain to washing powders, moisture can play an important role in the final quality of the product. There are two main aspects of concern in moisture control in products: allowing too much moisture or too little of it. For example, water moisture in steel furnaces play a major role as this will have an great effect on the quality of the steel. Moisture also triggers corrosion in metal pipes which can create high costs.

  • Level Measurement System

    Level Mate III - AMETEK Drexelbrook

    The Drexelbrook Level Mate III is a complete easy-to-use, intrinsically safe level system. Due to a wide variety of accessories and its customized meter the Level Mate III is the most versatile level measurement system on the market.It comes with a rugged steel sensor housing for environmental protection and a series of perforations in the bottom protects the sensing port from clogging or damage.The customized meter is microprocessor controlled displays data from the level transmitter and uses a 4-20 mA analog output.It features an easy-to-read LED display offering local indication while the optional analog output can interface with ancillary display, recording or control devices. The meter can be calibrated for inches of water, feet of water, meters of water, or any desired engineering units.

  • Logger version 2-D electro-magnetic current meter for deep ocean

    INFINITY-Deep AEMD-USB - JFE Advantech Co., Ltd.

    INFINITY-Deep is an autonomously deployable data logger for current speed measurements in the deep oceans. The currents in the deep oceans are very weak. It is too hard to accurately measure the deep water currents by some ADVs (Acoustic Doppler Velocimeters) that detect the Doppler-effect by scatter with the suspended particles in the water, because the concentration is very low. INFINITY-Deep measures 2-D current data through a magnetic field according to Faraday's law. Therefore, even if the suspended particles do not exist around the sensor, it can provide the accurate current data. The depth rating is 6,000m. Compared to INFINITY-EM, the instrument has a depth and a tilt sensors to monitor mooring status. Also, the battery capacity doubles for long-term current velocity measurements.

  • Acoustic Transponding Release

    Model R500 - Teledyne Benthos

    Teledyne Benthos is pleased to introduce the new R500 Acoustic Release for shallow water operations in up to 500 meters depth. This new acoustic release is based on the field-proven technology previously introduced in our R2k and R12K acoustic releases, which represent the latest in subsea technology. As with our other R-Series Acoustic Releases, the R500 can be used with our full feature UTS-9400 Universal Top Side for those that that already own this topside system, or that require those enhanced capabilities. For those looking for basic, reliable coastal operations, the R500 can be combined with our new Releaseit Deck Unit for a cost-effective shallow water alternative. ​

  • Relative Humidity

    COSA Xentaur

    The amount of water vapor in the air at any given time is usually less than that required to saturate the air. The relative humidity is the percent of saturation humidity, generally calculated in relation to saturated vapor density. Relative humidity is the ratio of the current absolute humidity to the highest possible absolute humidity (which depends on the current air temperature). A reading of 100 percent relative humidity means that the air is totally saturated with water vapor and cannot hold any more, creating the possibility of rain. This doesn''t mean that the relative humidity must be 100 percent in order for it to rain -- it must be 100 percent where the clouds are forming, but the relative humidity near the ground could be much less.

  • Ozone Meters

    PCE Instruments

    The ozone meters Ozone Meters to determine the content of ozone in the air or in the water.are essentially used in environmental technology, but the ozone meters are also used in industrial processes. Therefore, and especially the ozone meters in water are necessary for water treatment or recycling facilities, such as disinfection processes. The handling of the ozone meters is very simple. The recalibration of such devices can be made by the user at any time. The ozone meter in air requires a more complicated calibration, usually a sensor works for two years with optimal results (little variation) before having to be changed. We are at your disposal for any consultation on ozone meters.

  • Turbidity / Suspended Solids

    KROHNE Messtechnik GmbH

    *Turbidity measurement is widely used in drinking water and wastewater applications. To address a wide range of applications, KROHNE offers different measuring solutions, from open channel measurement with the OPTISENS TUR 2000 to low-range measurement systems such as the OPTISYS TUR 1050.*Total Suspended Solids (TSS) is a key measurement for water, wastewater and certain industrial processes. Typically, TSS is monitored through periodic grab samples with gravimetric determination in the lab. Quantitative online TSS measurement is often done with absorption sensors. The TSS sensors like the OPTISENS TSS 3000 or OPTISENS TSS 7000 also provide immediate results for process control and reduce the need for the time consuming suspended solids lab analysis.

  • Standard Portable pH, Conductivity and TDS Combination Meter

    MW802 - Milwaukee Instruments

    he MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too acidic or alkaline can have an adverse effect on plant nutrient and water uptake and directly effect the efficiency of fertilizer, herbicides and pesticides. Soil Conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness.Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS. MW802

  • Dissolved Oxygen

    Sper Scientific

    Dissolved oxygen (DO) is one of the most important indicators of water quality. It is essential for the survival of fish and other aquatic organisms and is used in hydroponics as well. When dissolved oxygen becomes too low, fish and other aquatic organisms cannot survive. Sper Scientific dissolved oxygen meters are made to accommodate the user with rugged, portable meters for use out in the field. All of our DO meters offer fast and accurate DO response times in wastewater, surface water and aquaculture applications. Three basic styles of DO meters are available for varying applications: Pens, Portable Meters, and Multi-parameter meters.

  • CrumpleFlex Tester

    TF117C - TESTEX Testing Equipment Systems Ltd.

    The equipment tests a tube of fabric by twisting it through 90o stretching alternately compressing the tube at the same time. After completion of the test the fabric is tested for resistance to penetration by water. CrumpleFlex Tester is fitted with electronic pre-determined counter with automatic stop at a pre-determined number of cycles, also fitted with acrylic plastic interlock safety cover.