Showing recent results 691 - 705 of 1045 products found.
-
CA80TP - Endress+Hauser AG
Total phosphorus analyzer for environmental monitoring, industrial and municipal wastewater. Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that's why continuous monitoring of this parameter is essential. The Liquiline System TP analyzer offers precise online measurement of total phosphorus and ensures highest process safety.
-
Campbell Scientific, Inc.
Many Campbell Scientific vibrating-wire peripherals enable dataloggers to read vibrating-wire sensors (also known as vibrating-wire or vibrating-strip transducers). These sensors measure strain, load, pressure, and water level, and they output a frequency signal generated by a vibrating filament. Campbell Scientific also offers vibrating-wire dataloggers that read the sensors directly.
-
AW Dynamometer, Inc.
When the Power Take Off is engaged, the hydraulic pump circulates the hydraulic oil through the manual flow control valve allowing the end user to fine tune the hydraulic pressure to the internal brake system. The torque reaction is measured by a torque arm that is attached to the back input shaft of the internal load unit. The heat that is created in this process is dissipated and carried out of the internal top tank by an incoming water source. In order to keep the internal brake’s synthetic oil in normal operating condition, the water temperature must not exceed 140 Degree F. When the end user is finished applying load to the application they are testing, the end user simply backs off the fine tune valve on top and opens the bottom course valve to relieve all pressure to the brake.
-
DVS Resolution - Surface Measurement Systems
DVS Resolution’s key feature is the combined ability to precisely control and measure temperature and relative humidity while recording the highest resolution changes in mass. DVS Resolution uses a dry carrier gas typically nitrogen or compressed air for its operation. Digital mass flow controllers regulate flows of dry and saturated gases. Relative humidity is generated by precisely mixing dry and saturated gas flows in desired flow ratios which produce expected relative humidity. In a typical experiment a known concentration of water vapor is delivered over a sample placed inside the sample pan connected to the Surface Measurement Systems Ultrabalance™ measuring realtime mass changes caused by sorption or desorption of water molecules. Prior to sorption measurements, the sample can be in-situ preheated/dried at temperatures of up to 300oC.
-
WB Series - Magtrol Inc.
Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as the speed increases, reaching peak torque at rated speed. The dynamometers have low inertia as a result of small rotor diameter. Brake cooling is provided by a water circulation system, which passes inside the stator to dissipate heat generated by the braking power. The water cooling in the WB provides high continuous power ratings (max. 140 kW). The WB dynamometers have accuracy ratings of 0.3% to 0.5% full scale ( 2% for WB 2.7), depending on size and system configuration. Additional options include: high-speed version, speed pickup, mechanical rotor blocking device, OEM version IS and vertical mounting.
-
Viserion® - Indatech
Viserion® Raman Spectrometer instrumentation relies on the interaction of a laser with the sample. The major part of the photons are elastically scattered. A very small part is inelastic scattered (10-7) at a different frequency than the laser one. The Raman Spectrometer scattered signal provides an information on vibrational, rotational and electronic energy of a molecule. The Raman Spectrometer instrumentation Spectra provide therefore information regarding the product chemical composition. One interesting point with Raman Spectrometer instrumentation is that it is much less sensitive to water (that usually limits NIR performance of NIR). In application such as Biotech where low concentrations of glucose need to be evaluated within the water media, this technology is of great interest. Molecule identification is also easier thanks to sharp peaks (example identifying different alcohols or sugars).
-
Circuit Assembly Corp.
All of our Solar Connectors are thoroughly tested and TUV 1500VDC and UL1000VDC approved. These connectors provide reliable, waterproof and anti-aging features, and are proven to withstand any heavy environmental conditions. Other Solar Connectors typically have a water permeability rating of 66 or 67. Our IP68 rating ensures that our Solar Connectors will hold up in the most severe environmental conditions including sand storms and water submersion up to 3 meters. Our solar connectors are compatible with any solar connectors in the industry. We have designed our connectors to complement other solar connectors as well as replace them. Whether you’re looking for solar connectors to use with your current ones or searching for solar connectors to start a project, our solar connectors will be right for you.
-
LISST-StreamSide - Sequoia Scientific, Inc.
Laboratory grade laser particle size analyzer compliant with ISO-13320-1 – same laser diffraction technology as in our other LISST lasers5 mm optical path length for high concentrations (read this article to compute how high concentrations the LISST-StreamSide can handle)Records detailed size distribution AND concentration in 32 size classesBuilt-in clean water delivery system for automatic clean water background collection5-inch graphics touch panel display for configuration and size distribution displayBuilt-in compact flash memory (128Mb standard, expandable to 4Gb)Size and volume distribution is computed on board and saved as ASCII file compatible with ExcelNominal 12VDC power (110VAC or 220VAC optional)Sealed NEMA-4X housing with clear cover and lockSpecially designed 12V sealed pump is available and recommended for use with the LISST-StreamSide
-
HE-960HC - HORIBA, Ltd.
FPD manufacturing processesThe HE-960HC measures conductivity, which forms the basis for parameters in chemical and waste water management. Its dual calculation circuits and software, combined with carbon sensors, enable measurements ranging without switching. The HE-960HC can be used as a process concentration meter, and also to monitor changes in the concentration of specified chemicals.
-
DewTrak II - Edgetech Instruments
The DewTrak II uses the chilled mirror dew point temperature condensation principle to determine the water vapor concentration in gas mixtures, and a platinum resistance thermometer to accurately measure that temperature. Outputs include 4 to 20mA, 0 to 5 Vdc, or 0-10Vdc and an RS232 serial port as well as electrically isolated relay contacts.
-
DMT 4010RMS - Monacor International GmbH & Co. KG
True RMS measuring principleDust and water protection according to IP class 67 in covered test socketsAutoranging for faster measurements4000 count resolutionAdditional bar displayVoltage measurement up DC / ~ 1000VCurrent measurement up DC / ~ 10 AFrequency measurement to 10 MHzResistance measurement up to 40 milliohmsCapacitance measurement to 40 mF
-
USPC 3060 UHF - Ingenieurbüro Dr. Hillger Ultrasonic-Techniques
The ultrasonic imaging system USPC 3060 UHF is optimized for the testing wih high frequencies and delivers high resolution B-, C-, Dand F- scans. It consists of a scanning system with water tank and the external pulser-/receiver module as well as a 19”-rack with scanner controller and the ultrasonic system and monitor, keyboard and mouse.
-
Apogee Instruments, Inc.
Calibrated to a custom black-body cone with a measurement uncertainty of 0.2 C from -30 to 65 C when the sensor (detector) temperature is within 20 C of the surface (target) being measured. Radiometers are only sensitive from 8 to 14 m (atmospheric window) to minimize the influence of water vapor and CO2 on the measurement.
-
Mi408 - Milwaukee Instruments
This user-friendly Colorimeter will give you direct readings in mg/L. Iron is naturally present in water supplies and its presence in both potable and industrial applications is regarded as objectionable.Milwaukee offers Mi408 microprocessor-based instrument with greater resolution, better accuracy and immediate results for measuring high concentrations of Iron (from 0.00 to 5.00 mg/L).
-
Energie Check profi - IKS Photovoltaik GmbH
Diverse building diagnostics and interior climate control options are possible with the measuring device case. The ideal measuring device equipment for building diagnostics and checking the indoor temperature: for energy advisers, caretakers, engineering companies and environmental officers. Tests can also be made regarding water consumption, illumination and energy consumption of electrical devices.
