Filter Results By:

Products

Applications

Manufacturers

Showing recent results 706 - 720 of 1012 products found.

  • Hamburg Wheel-Tracking Tester

    Atico Export

    The Hamburg Wheel-Tracking Tester is used to test submerged, compacted Hot Mix or Warm Mix Asphalt specimens as per standard.The device consists of a reciprocating wheel that is rolled over the specimens while measuring the rate of permanent deformation. A constant load of 705 N ±4.5 N is applied to the specimens with a sinusoidal wheel speed of 1 ft/sec in a constant temperature controlled water bath up to 70 °C (± 1.0 °C). An LVDT jig is used for continuous measurement of permanent deformation along the path of the rolling wheel. Accommodates cylindrical or slab specimensSoftware for automatic determination of Stripping inflection PointNumber of passes to SIP, number of passes to failure and other calculated parametersStainless steel construction with temperature controlled water bath up to 70ºC

  • Eddy-Current Dynamometers

    WB Series - Magtrol Inc.

    Eddy-Current Brake Dynamometers (WB Series) are ideal for applications requiring high speeds and also when operating in the middle to high power range. Eddy-Current Brakes provide increasing torque as the speed increases, reaching peak torque at rated speed. The dynamometers have low inertia as a result of small rotor diameter. Brake cooling is provided by a water circulation system, which passes inside the stator to dissipate heat generated by the braking power. The water cooling in the WB provides high continuous power ratings (max. 140 kW). The WB dynamometers have accuracy ratings of 0.3% to 0.5% full scale ( 2% for WB 2.7), depending on size and system configuration. Additional options include: high-speed version, speed pickup, mechanical rotor blocking device, OEM version IS and vertical mounting.

  • Agricultural Dynamometer

    AW Dynamometer, Inc.

    When the Power Take Off is engaged, the hydraulic pump circulates the hydraulic oil through the manual flow control valve allowing the end user to fine tune the hydraulic pressure to the internal brake system. The torque reaction is measured by a torque arm that is attached to the back input shaft of the internal load unit. The heat that is created in this process is dissipated and carried out of the internal top tank by an incoming water source. In order to keep the internal brake’s synthetic oil in normal operating condition, the water temperature must not exceed 140 Degree F. When the end user is finished applying load to the application they are testing, the end user simply backs off the fine tune valve on top and opens the bottom course valve to relieve all pressure to the brake.

  • Raman spectrometer

    Viserion® - Indatech

    Viserion® Raman Spectrometer instrumentation relies on the interaction of a laser with the sample. The major part of the photons are elastically scattered. A very small part is inelastic scattered (10-7) at a different frequency than the laser one. The Raman Spectrometer scattered signal provides an information on vibrational, rotational and electronic energy of a molecule. The Raman Spectrometer instrumentation Spectra provide therefore information regarding the product chemical composition. One interesting point with Raman Spectrometer instrumentation is that it is much less sensitive to water (that usually limits NIR performance of NIR). In application such as Biotech where low concentrations of glucose need to be evaluated within the water media, this technology is of great interest. Molecule identification is also easier thanks to sharp peaks (example identifying different alcohols or sugars).

  • Sievers Boron Analyzer

    GE Analytical Instruments

    The Sievers UPW (Ultra pure water) Boron Analyzer offers a limit of detection of 15 parts-per-trillion boron and up to 10 samples per hour, making continuous boron monitoring in ultrapure water very affordable and convenient for semiconductor and microelectronics applications. The Sievers UPW Boron Analyzeralso exceeds ICP-MS performance (seeProgress Report on New On-line Boron Analyzer Research), and does it at a fraction of the cost. A true "plug-and-play" boron measurement instrument, the Sievers Boron Analyzer can be installed in less than an hour, requires no skilled or trained operator, and provides the sensitivity and accuracy of ICP-MS or on-line Ion Chromatography. A built-in multiplexor even allows for monitoring of up to four sample streams with customizable settings for each stream.

  • Suspended Sediment Sensor

    LISST-StreamSide - Sequoia Scientific, Inc.

    Laboratory grade laser particle size analyzer compliant with ISO-13320-1 – same laser diffraction technology as in our other LISST lasers5 mm optical path length for high concentrations (read this article to compute how high concentrations the LISST-StreamSide can handle)Records detailed size distribution AND concentration in 32 size classesBuilt-in clean water delivery system for automatic clean water background collection5-inch graphics touch panel display for configuration and size distribution displayBuilt-in compact flash memory (128Mb standard, expandable to 4Gb)Size and volume distribution is computed on board and saved as ASCII file compatible with ExcelNominal 12VDC power (110VAC or 220VAC optional)Sealed NEMA-4X housing with clear cover and lockSpecially designed 12V sealed pump is available and recommended for use with the LISST-StreamSide

  • Wire tracer

    LKZ-700 - Amperis sl

    The wire tracer LKZ-700 allows the tracing and location of underground cable up to 2m. deep. Monitoring of the path of the conductors in metal pipes, or monitoring of water or heating pipe installation, are some of the applications of this powerful and useful equipment.

  • Bucket Rain Gauge Meter

    HD 2013 - Delta OHM S.r.L.

    The HD2013 is a reliable and sturdy bucket rain gauge, built entirely from corrosion resistant materials in order to guarantee its durability. So as to ensure accurate measurement even with low temperature climatic conditions or during and after precipitations of snow, a version with a heater which is automatically activated around +4C has been developed so that snow deposits and ice formations are prevented.The rain gauge is formed by a metal base on which a tipping bucket is set. The rain collector cone, fixed to the aluminium cylinder, channels the water inside the tipping bucket: once the predefined level is reached, the calibrated bucked rotates under the action of its own weight, discharging the water. During the rotation phase, the usually closed reed contact opens for a fraction of a second, sending an impulse to the counter.The quantity of rainfall measured is based on the count of the number of times the bucket is emptied: the reed contacts, usually closed, open at the moment of the rotation between one bucket's section and the other. The number of impulses can be detected and recorded by a datalogger such as the HD2013-D DeltaOhm or by a pulse counter.A removable filter for periodic cleaning and maintenance is inserted in the water collector cone so as to prevent leaves or other elements blocking the end of the hole.For better water flow, the collector cone is treated with a teflon paint.The HD2013R, the version with a heater, operates using either 12Vdc or 24Vdc voltage and uses about 35W. Heating is activated around +4C.When submitting your order, upon request a bird dissuader, made of 8 3 mm diameter spikes, 60 mm in height, can be installed on the rain gauge.

  • Aquameter

    T-M-160 - James Instruments Inc.

    he James Instruments? Aquameter MK II utilizes the latest electronic technology to measure the quantity of water within its sensing field. The T-M-160 using a high frequency capacitive sensor, samples a large volume of material, approximately 460 mm x 670 mm x 25 mm (1 13/16? x 2 5/8? x 1?), instantaneously.

  • Bench Conductivity Meters

    4510/4520 - Jenway

    The 4510 is easy to use but with the flexibility to meet the broadest range of applications and for those where greater accuracy is required the 4510 has automatic conductivity standard recognition and endpoint detection. The 4520 is a high specification laboratory conductivity /resistivity/TDS/salinity and temperature meter that offers additional accuracy with 1, 2 or 3 point conductivity calibration across the wide measurement range of 0 to 19.99S. The dedicated "pure water" mode ensures the optimum accuracy for this difficult application.

  • Benchtop NMR Analyser

    MQC+ - Oxford Instruments plc

    MQC+ benchtop NMR (Nuclear Magnetic Resonance) analyser for the measurement of oil, water, fluorine and solid fat in a variety of samples in a wide range of industries. The MQC+ replaces wet chemical analysis, which uses hazardous chemicals, and allows the measurement of more samples much faster. Unlike wet chemical methods, the MQC+ does not destroy the sample being measured. It can also measure physical properties including crystallinity and density of polymers.

  • BitScope Micro Oscilloscope & Analyzer

    BS05 - BitScope

    20 MHz Bandwidth.40 MSps Logic Capture.2 Analog Scope Channels.2 Analog Comparator channels.6 Logic/Protocol Analyzer channels.8 & 12 bit native analog sample resolution.Decodes Serial, SPI, I2C, CAN and more.Windows, Linux, Mac OS X & Raspberry Pi.Built-in analog waveform & clock generators.User programmable, C/C++, Python, VM API.Tiny, light weight (14g) and water resistant.Standard oscilloscope probe adapters available.

  • Borescopes & Inspection Cameras

    Triplett

    Is an inspection camera with a detachable wireless 3.5" color display. It features 4x digital zoom, water resistant 8mm camera with 3.5ft cable, and 4 adjustable white LEDs for illumination.The wireless display detaches from the handle for additional freedom in viewing, and internal magnets will conveniently mount it to steel surfaces. With the included Micro SD card you can save snapshots and live video. Saved files can be viewed on the LCD screen or downloaded to a computer via the USB port.

  • Autonomous Data Collector ø 18 mm / Data Logging

    DCX-18 ECO - KELLER AG für Druckmesstechnik

    The DCX-18 ECO is an autonomous, rechargeable battery powered instrument. It features a stainless steel 18 mm in diameter housing designed to record pressure (water depth) and temperature over long periods at a very economical price. Its small size, rechargeable battery, fully welded housing and the relative sensor option are just a few of the many advantages provided by the DCX-18 ECO.

  • Automation Services

    YASTRONICS CO.,LTD.

    Yastronics has a group of dedicated and experienced professional engineers in this division. This division carryout the work to automate various production plants to PLC control system-designed for your specific and modern technology of this century. In Saudi Arabia, we can announce honestly that our team of specialists has automated most of the Ready-mix Concrete plants as well as Asphalt plants. Also some of the old model heavy mechanical machine units, water treatment plants, also small or big plants to the entire satisfaction of our clients in a highly professional way.