Filter Results By:

Products

Applications

Manufacturers

Water

llquid state of H2O.

See Also: Water Quality, Water Meters


Showing results 736 - 750 of 944 products found.

  • Low Cost DMM

    Series 22 - Fine Instruments Corp.

    The Finest 22 is a very low cost 3½ -digit, 2000 count DMM designed for electrical professionals. The surface mounting technology delivers superior Finest quality at a price of "disposable meters". The Finest 24 is a low cost 3 3/4-digit, 4000 count basic auto ranging DMM with exceptional value.It is ideally suited for field, lab, soap, and home applications.Especially, the IP67 Dust and Water proof O-Ring sealed enclosures provide heavy-duty uses under the extremely harsh operating conditions. - 22-3½ digit, 2000 count, Manual ranging. - 24-3¾ digit, 4000 count, Auto ranging with manual override

  • stand-alone show playback,

    CueServer - Interactive Technologies, Inc.

    CueServer is a unique lighting control solution. At it's heart, it's an Ethernet-based lighting console with all of it's controls accessible via easy to use built-in web pages. Additionally, CueServer is a powerhouse of stand-alone architectural and show control features that can be mixed together to produce elaborate playback systems.CueServer is perfect for many lighting control applications, such as LED displays, architectural lighting, retail projects, museum attractions, theme parks, trade show exhibits, sign animation, churches, water fountains and much more. CueServer easily scales from the smallest single-fixture project to large-scale networked solutions.

  • Temp/RH Loggers

    HOBO MX2300 Series - Onset Computer Corporation

    With Onset’s new HOBO MX2300 Series Temp/RH loggers, field data collection has never been easier. You can set up and offload loggers wirelessly from your mobile device – eliminating the need to take a laptop or data shuttle into the field to retrieve data. The HOBO MX2300 Series offers five models covering a broad range of outdoor monitoring applications, from agricultural research to forest ecology studies. The series includes internal sensor models that are highly durable and easy to deploy, and external probe models that are well-suited for monitoring conditions in soils, water, walls, and more.

  • Thermistor liquid-immersion probe; 1/8" dia

    EW-08436-00 - Cole-Parmer Instrument

    Probes are accurate to ±0.1degC from 0 to 70degC. For tolerances outside of this range please see the introduction section on page 1081. All probes include certificate indicating traceability to NIST standards. Electrically isolated probes come with a nondetachable 10-ft lead with phone plug (except as noted). Water-resistant junctions between probe and lead should not be immersed; detachable leads are not water resistant. Note: Time constant is estimate time required to reach 63.2% of a new reading. To determine how long it will take to reach 99% of a new reading multiply the time constant by five.

  • Hydrogeology

    HAPPIE - PASI srl

    The H.A.P.P.I.E. program (Hazard of Aquifer Pollution Potential Impact Evaluation) provides a conservative answer to the problem of determining risk levels in emergency conditions, which means that areas where illegal waste disposal sites, overflows and ruptures of impermeable sheeting are present and where water withdrawal should be discontinued can be identified. H.A.P.P.I.E. in fact offers a conservative response to the problem of the determination of the environmental impact in critical conditions that can usually be correlated to the requirements of defining areas in which the supply operations should be interrupted in emergency conditions, therefore in very short times and without the possibility of obtaining an accurate collection of the hydrogeological data.

  • Combination Glove-Sleeve-Blanket-Line Hose Testing Equipment

    LSY,MSY,NSY Series - The Von Corp

    The LSY, MSY and NSY Series is The VON Corporation’s fully automated, microprocessor controlled test lab in a box. Units allow testing of Gloves, Sleeves, Blankets, Line Hose, Hoods and even Line Jumpers. All standard rubber goods can be tested, even class IV. All machine adjustments are controlled via a menu operated microprocessor control system. With a single selection the test voltage, current limit, depth, water fill level, test time, blower speed and exhaust fan speed are set. In the case of gloves, the operator is required to merely load gloves in the special clothespins, lower the test electrode into the glove and press the start button. Automated water fillers will fill the glove in less than 30 seconds. Tests are timed and an audible alarm sounds failures or test complete, with bright flashing colored lights signaling which position failed, or test complete. Other types of rubber goods are tested just as easily and automatically.

  • Dual Vapor Gravimetric Sorption Analyzer

    DVS Resolution - Surface Measurement Systems

    DVS Resolution’s key feature is the combined ability to precisely control and measure temperature and relative humidity while recording the highest resolution changes in mass. DVS Resolution uses a dry carrier gas typically nitrogen or compressed air for its operation. Digital mass flow controllers regulate flows of dry and saturated gases. Relative humidity is generated by precisely mixing dry and saturated gas flows in desired flow ratios which produce expected relative humidity. In a typical experiment a known concentration of water vapor is delivered over a sample placed inside the sample pan connected to the Surface Measurement Systems Ultrabalance™ measuring realtime mass changes caused by sorption or desorption of water molecules. Prior to sorption measurements, the sample can be in-situ preheated/dried at temperatures of up to 300oC.

  • Agricultural Dynamometer

    AW Dynamometer, Inc.

    When the Power Take Off is engaged, the hydraulic pump circulates the hydraulic oil through the manual flow control valve allowing the end user to fine tune the hydraulic pressure to the internal brake system. The torque reaction is measured by a torque arm that is attached to the back input shaft of the internal load unit. The heat that is created in this process is dissipated and carried out of the internal top tank by an incoming water source. In order to keep the internal brake’s synthetic oil in normal operating condition, the water temperature must not exceed 140 Degree F. When the end user is finished applying load to the application they are testing, the end user simply backs off the fine tune valve on top and opens the bottom course valve to relieve all pressure to the brake.

  • Legacy Liquid Detection Rope Sensor

    ENVIROMUX-LDSx-y - Network Technologies Inc

    For warning of flooding. Detects liquid depth >0.1" (2.5 mm). Minimum puddle: 0.6" (15 mm) diameter. 100% waterproof electronics. Detects any liquid or moisture, except deionized water. RJ45 connector. Voltage Supply: 12VDC. Current Consumption: 20mA. Supports CAT5/5e/6 cable up to 1,000 ft. (305 m). Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet. Plenum rating: CL2P (UL). Available 2-wire cable (y) lengths: 5/10/20/50/100 feet. Powered by ENVIROMUX-SEMS-16U and SERIMUX-S-x. Regulatory approvals: CE, RoHS. Requires the ENVIROMUX-SEMS-16U and SERIMUX-S-x to operate. Use self-adhesive clips (ENVIROMUX-CLP10-LD) to prevent sensor rope cable from shifing after installation. ENVIROMUX-CLP10-LD includes 10 clips.

  • Ultrasonic Flowmeter

    Portaflow C - Fuji Tecom Inc.

    The new Fuji Water Flow C uses the same measurement principle as Fuji's ultrasonic flowmeters of which a great number have already been delivered.Transducers located outside an already installed pipe constitute a sensor for finding out the time interval between transmission of an ultrasonic signal and its reception which is variable with the flow rate.The flow can be obtained from this interval. Since only an ultrasonic wave is admitted into the pipe, the liquid suffers no pressure loss; thus the flow can be easily measure.Fitted with the standard sensor it can make a flow measurement for pipes with a diameter ranging from 50mm to 400mm. When equipped with the optional large sensor, it can be used for pipes with a diameter of 200mm to 6,000mm.Non Revenue water specialists use the Portaflow C to know the Minimum Night Flow in the District Meterd Area, before the leak survey and after the repair of the leakage.

  • Hamburg Wheel-Tracking Tester

    Atico Export

    The Hamburg Wheel-Tracking Tester is used to test submerged, compacted Hot Mix or Warm Mix Asphalt specimens as per standard.The device consists of a reciprocating wheel that is rolled over the specimens while measuring the rate of permanent deformation. A constant load of 705 N ±4.5 N is applied to the specimens with a sinusoidal wheel speed of 1 ft/sec in a constant temperature controlled water bath up to 70 °C (± 1.0 °C). An LVDT jig is used for continuous measurement of permanent deformation along the path of the rolling wheel. Accommodates cylindrical or slab specimensSoftware for automatic determination of Stripping inflection PointNumber of passes to SIP, number of passes to failure and other calculated parametersStainless steel construction with temperature controlled water bath up to 70ºC

  • Marine Inclinometer

    SST300 - Vigor Technology

    1. The underwater tilt sensor combines high-precision and real-time remote communication capabilities to monitor the tilting posture of underwater structures or slowly moving objects. The high-performance SST300 marine inclinometer is fixed in a rugged, waterproof enclosure that works stably up to 3000m underwater.2. The stainless steel casing is processed and welded. Each product meets the high pressure test and provides extreme endurance in a long-term underwater high pressure environment. The cable and socket are a submarine-grade connector that provides water resistance of water depths exceeding 3,000 meters.3. This unit provides ±0.1%FS cross-axis sensitivity and ±0.01° combined absolute accuracy. It is a real high performance product.4. In order to solve the installation error caused by underwater installation, the sensor adopts “mounting alignment deviation” to reduce the installation error. The sensor can be mounted directly on a horizontal, vertical or inclined surface.

  • Automotive Borescopes

    Extech Instruments Corporation

    Inspect in walls for mold, insect infestation, electrical wire or water pipe location HVAC (Inspect inside ducts, behind motors and compressors); Automotive (View inside or around engines and transmissions); Industrial (Inspect weld integrity, process equipment, gears, molding machines); Aerospace (Aircraft inspections for contamination, debris, cracks or other damage), and Government (Safety and security inspections) Applications.

  • Autonomous Data Collector ø 18 mm / Data Logging

    DCX-18 ECO - KELLER AG für Druckmesstechnik

    The DCX-18 ECO is an autonomous, rechargeable battery powered instrument. It features a stainless steel 18 mm in diameter housing designed to record pressure (water depth) and temperature over long periods at a very economical price. Its small size, rechargeable battery, fully welded housing and the relative sensor option are just a few of the many advantages provided by the DCX-18 ECO.

  • Atomic Emission Analyzer

    AES - Torontech Group

    The concrete impermeability testing system is designed with many different standards in mind including DIN 1048, ISO/DIS 7031, EN-12390-8 & UNI 9533. This impressive piece of machinery comes in different models with either 3 or 6 measuring points and with or without quantitative measurement of water permeability . The supporting structure is very stable and is at a convenient height to allow the easy access. The pans are made out of stainless steel, the specimens are easy to insert due to the clamping device.