Filter Results By:

Products

Applications

Manufacturers

Showing results 886 - 900 of 960 products found.

  • Milk Analyzers

    MRC ltd.

    Measuring parameters: FAT 0.01% - 25%SNF 3% - 15%Density 1015 1040kg/m3Proteins 2% - 7%Lactose 0.01% - 6%Water content 0% - 70%Temp. of milk 1C 40CFreezing point - -0.400 0.700CSolids 0.4 1.5%1. Sample visualization onLCD display(green)2. Possibility to measure 1 sample 90 seconds(option 60 seconds)3. Adapter 220-110 V 4.Spare silicone tubes5. Syringe6. Plastic sample holder7. Calibrations Cow, Sheep, and UHT milk8. Operation Manual9. Cardboard transport case10. CD Service PackMeasuring time 30s

  • Miller 400A

    44500 - M. C. Miller Company

    Rugged, lightweight case - safe to use on wet ground• Weatherproof, even with lid removed - IP67 rating for dust and water intrusion• Convenient case lid removal for ease of movement, with test leads attached, to new measurement locations• Resistance measurement range from 0.01Ω to 1.1MΩ • Resistance measurements are unaffected by any stray interference signals that may be present in the earth during readings, due to the use of narrow band-pass filters centered at 97Hz (the unit’s operating frequency)• Runs on a set of C-cell alkaline batteries...no need to periodically recharge the unit or to plug it into a power source

  • Multispectral Airborne LiDAR Sensor

    Titan - Optech Inc

    As the world's first multispectral airborne lidar sensor, Optech Titan is opening up a new era in lidar survey and mapping. 3D surface spectral response information sensitive to the emitted wavelengths can now be derived day or night from complex environments using a single lidar sensor. Such information opens up exciting new applications and can significantly improve existing application results moving forward. Whether it is high density topographic surveying, seamless shallow water bathymetry, environmental modeling, impervious urban surface mapping, or vegetative classification, the Optech Titan breaks new ground in active sensor design and performance.

  • Manual digestor blocks for effecient Kjeldahl analysis

    Labtec Line - FOSS A/S

    The Labtec DT 208 & DT 220 basic Digestion systems for Kjeldahl analysis consist of a digestion unit and a tube rack. The digestion units are insulated to minimise heat transfer to the surroundings and allow fast, even heating, thus giving good working conditions as well as saving energy. They are designed for batches of either eight (DT 208) or twenty test tubes (DT 220). Parameters:Kjeldahl digestions, Chemical Oxygen Demand & other reflux chemistries, Trace metal analysis by AAS or ICP instruments. Sample types: Raw materials and finished products in Food, Feed, Agriculture and related matrices, Water & Wastewater and a wide range of industrial compounds.

  • Linear Actuators

    Electrak Pro - Thomson

    Thomson introduces our Electrak Pro Series of linear actuators. This family stands alone when it comes to the toughest and most demanding applications. Available in 12 or 24 VDC models with customizable stroke lengths up to 300 mm (12 in), these units can push or pull loads up to 4448 N (1000 lbf) at speeds of 20 mm/s (0.8 in/s) and hold loads up to 9000 N (2000 lbf), or contact our factory for longer strokes or higher loads. When space is scarce, where dust, dirt, and water are abundant and when solid, reliable and maintenance-free operation is a must - Electrak Pro is the answer.

  • Deep Submersible Particle Size Analyzer

    LISST-Deep - Sequoia Scientific, Inc.

    The LISST-DEEP instrument obtains in-situmeasurements of particle size distribution,optical transmission, and the opticalvolume scattering function (VSF). Using ared 670nm diode laser and a customsilicon detector, small-angle scatteringfrom suspended particles is sensed at 32specific log-spaced angle ranges. Thismeasurement is post-processed to obtainsediment size distribution, volumeconcentration, optical transmission, andVSF. The electronics and opticalconfiguration in the LISST-DEEP are verysimilar to Sequoia’s workhorse, the LISST-100X. However, because of the extremedifficulty associated with keepingalignment under high pressure, the LISSTDEEPhardware design is radically differentfrom the LISST-100X. This allows theLISST-DEEP to be deployed down to 3000m and obtain reliable measurements ofthe in situ particle size distribution andvolume concentration in waters withoptical transmission up to 98.5%.

  • Borescope Cameras / Videoscopes

    Extech Instruments Corporation

    Sometimes called a boroscope or endoscope camera, Extech’s borescopes offer video and photo recording functions, and wireless displays for an unobstructed view no matter how you angle your camera. Extech’s video borescope models are perfect for a wide range of applications including inspecting wall cavities for moisture, insect infestation, or locating electrical wiring and water pipes. Use for automotive access around tight engine bays, or inspect ducts and obscured areas behind motors and compressors. They’re also ideal for safety and security inspections, weld inspections, industrial machinery inspections (gearboxes, molding machines, cylinder bores, etc.), concealed contraband inspections in prisons, and more.

  • Infrared Gas Analyzers

    Campbell Scientific, Inc.

    Campbell Scientific offers both open-path and closed-path infrared gas analyzers for measuring carbon dioxide and water vapor. Campbell Scientific also offers a closed-path analyzer for measuring methane, nitrous oxide, or isotopologs of carbon dioxide. Designed specifically for eddy-covariance flux measurements, these analyzers offer the following benefits: integrated system design, aerodynamic intake or analyzer body, low power, synchronized measurements with the sonic anemometer, reduced spatial separation between analyzer and sonic anemometer, unrivaled flexibility in data acquisition, and data collection from additional system sensors with Campbell Scientific dataloggers.

  • InGaAs Camera

    1280SCICAM - Princeton Infrared Technologies, Inc.

    This lattice matched InGaAs camera allows for high resolution SWIR and visible imaging 1280x1024 at high frame rates >95fps at full frame size. This small pitch array, 12μm, combined with the high quantum efficiency of the lattice matched InGaAs arrays enables impressive imaging in the SWIR and visible band. The camera has the capability of three setpoints, 25C (no cooling), 0C (fan cooling) or -50C (water cooled) using a 3 stage TEC integrated in a vacuum package. This advance digital array (PIRT1280A1-12) on board offers 14 bit digital output with low read noise of <30e- with no image lag is lower than all cooled SWIR scientific cameras.

  • Eddy Current Dynamometer

    EC Series - Power Test, Inc

    Specifically designed for small displacement diesel engines, the Eddy Current (EC-Series) engine dynamometer features in-line eddy current absorption units in a robust, compact frame. The air-cooled eddy current absorbers eliminate the need for an expensive water recirculation system and most engines being tested can be cooled with a standard closed-circuit radiator system. This compact air-cooled design results in a minimal environmental impact and the ability to be easily relocated with no need for a permanent installation. When combined with PowerNet LT, our fully automated dynamometer control system, all of your testing needs can be performed at the touch of a button.

  • Digestion Systems

    Tecator line - FOSS A/S

    FOSS Tecator line Digestion systems are based on a digestion unit and a tube rack, allowing fully automated digestion for convenient, safe and flexible Kjeldahl analysis. Two way PC communication supports traceability and GLP. These versatile digestion systems are capable of handling eight, twenty or forty tubes in volumes of 100 ml, 250 ml or 400 ml dependent on chosen configuration. Parameters: Kjeldahl digestions, Chemical Oxygen Demand & other reflux chemistries, Trace metal analysis by AAS or ICP instruments. Sample types: Raw materials and finished products in Food, Feed, Agriculture and related matrices, Water & Wastewater and a wide range of industrial compounds.

  • Pinless Moisture Meter

    MO57 - Extech Instruments Corporation

    Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <4" (100mm) with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A musthave tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.

  • Pipeline & Cable Locator

    STC-PCL 1101 - Shanghai Stone Communication tech Co., Ltd

    STC-PCL1101 Pipeline & Cable Locator consists of a Transmitter and a Receiver, used in the underground utilities route locating, the depth measuring and long distance tracing. We adopted multicoil electromagnetism technology on this Pipeline & Cable Locator, enhanced the pipeline localization to decide the depth precision and the goal pipeline recognition capability, also could accurately carry on tracing and the localization in the pipeline crowded complex region to the goal pipeline. Thus it is widely used in the telecommunication, electric, tap water, natural gas, physical prospecting, town planning and so on.. STC-PCL1101 has many optional accessories, thus increased their use, and expanded their application scope.

  • 600 kHz Phased Array DVL

    Pathfinder - Teledyne RD Instruments

    Doppler Velocity Log provides an array of advanced internal algorithms and features you’d typically expect to find only in higher-end solutions. With up to 80 m of bottom tracking, in up to 300 m of water, the Pathfinder 600 delivers a solid, value-priced solution for vehicles ranging from small inspection class ROVs to large diameter AUVs. bottom-detection algorithms and single-ping bottom-location accuracy with its broadband velocity processing technology, the Pathfinder provides users with highly reliable precision velocity data for navigation and position control, even over indeterminate terrain.

  • Turbidity Meters

    WTW

    Quality monitoring with turbidity measurement is used in the drinking water and wastewater preparation, but also in many industrial processes as well as in the goods receiving areas of many industries: E.g. turbidity measurement in gasoline for motor development or cell cultures in biotechnology. Turbidity offers unknown opportunities. Due to a LabStation, the portable meters b Turb® 430 are fully functioning benchtop meters. In addition to the standardization process, the application is a decisive factor for the selection: Particle size, number and coloration influence of the samples. The table indicates the best suitability, but not an absolute must. Colored samples with cell cultures yield very different values, depending on the lamp used, but can both be used in the internal quality control.