Filter Results By:

Products

Applications

Manufacturers

Showing recent results 901 - 915 of 1003 products found.

  • 600 kHz Phased Array DVL

    Pathfinder - Teledyne RD Instruments

    Doppler Velocity Log provides an array of advanced internal algorithms and features you’d typically expect to find only in higher-end solutions. With up to 80 m of bottom tracking, in up to 300 m of water, the Pathfinder 600 delivers a solid, value-priced solution for vehicles ranging from small inspection class ROVs to large diameter AUVs. bottom-detection algorithms and single-ping bottom-location accuracy with its broadband velocity processing technology, the Pathfinder provides users with highly reliable precision velocity data for navigation and position control, even over indeterminate terrain.

  • Radiometer

    CNR 4 - Kipp & Zonen B.V.

    The CNR 4 net radiometer consists of a pyranometer pair, one facing upward, the other facing downward, and a pyrgeometer pair in a similar con?guration. The pyranometer pair measures the short-wave radiation. And the pyrgeometer pair measures long-wave radiation. The upper long-wave detector of CNR 4 has a meniscus dome. This ensures that water droplets role off easily and improves the field of view to nearly 180, compared with a 150 for a flat window. All 4 sensors are integrated directly into the instrument body, instead of separate modules mounted onto the housing. But are each calibrated individually for optimal accuracy.

  • Valve Leak Measurement System

    VLMS - G Systems, l.p.

    The G Systems Valve Leak Measurement System (VLMS) reliably measures slow leaks that are unidentifiable with conventional leak detectors, helping manufacturers test and ensure that critical valves are absolutely airtight. The G Systems VLMS is a self-contained counting instrument for automating the industry-standard practice of leak detection by bubble formation using a submerged tube in water. The G Systems VLMS provides accurate measurement of leaks that are too small for conventional flow meters to reliably detect and is ideal for applications that must be absolutely airtight, including medical device, pharmaceutical, oil and gas, and plumbing valves.

  • Vapor Sorption Analysis

    TA Instruments

    Vapor Sorption Analysis is a technique in which a sample is subjected to varying conditions of humidity and temperature, and the response of the sample is measured gravimetrically. Understanding the effects of water content on structure and properties is critical in the development, processing and end use of a broad spectrum of materials. TA Instruments offers the most sensitive, versatile, and productive moisture sorption analyzers on the market. The Q5000SA combines a high-sensitivity thermobalance, innovative humidity control chamber, and reliable autosampler. The VTI-SA boasts an integrated dew-point analyzer and organic solvent capability. Innovative technology combined with our unparalleled reputation for service and support make TA Instruments the clear choice of scientists worldwide for vapor sorption studies.

  • Static Pressure Meters

    Fieldpiece Instruments, Inc

    Portable dual port manometer accessory head for use with our modular multimeters (DMMs) and instruments. Measures gas pressure, static pressure and pressure differential. The ADMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Disable APO for data logging. The ADMN2 measures pressure between -60inWC and 60inWC (inches of water column) and -150.0 to 150.0 mBar. The ADMN2 also measures P1 or P2 pressure readings and calculates the difference between P1 and P2. Take static pressure measurements using the resolution mode of 0.01inWC or 0.01mBar.

  • Flow Cytometer

    INO

    Nowadays, quality control is a key part of any industrial process, in line with dynamically changing standards, and creation of new standards and protocols in accordance to each industry. Flow cytometry is a widely used bioanalysis technique in a larger number of applications. Extensively used in fields like microbiology, the technology has also proven benefits in the food and agrifood industry. A potential application is the absolute somatic cells count in the milk. Flow cytometry can also be applied for environmental and sanitary microbiology for applications such as detection of bacterial cells in milk or water for quality control and assurance testing.

  • Borescope Cameras / Videoscopes

    Extech Instruments Corporation

    Sometimes called a boroscope or endoscope camera, Extech’s borescopes offer video and photo recording functions, and wireless displays for an unobstructed view no matter how you angle your camera. Extech’s video borescope models are perfect for a wide range of applications including inspecting wall cavities for moisture, insect infestation, or locating electrical wiring and water pipes. Use for automotive access around tight engine bays, or inspect ducts and obscured areas behind motors and compressors. They’re also ideal for safety and security inspections, weld inspections, industrial machinery inspections (gearboxes, molding machines, cylinder bores, etc.), concealed contraband inspections in prisons, and more.

  • Rotational Flow Demonstration Kit

    Renesas Electronics Corp.

    The rotational flow demonstration kit detects the rotational position using the MCU’s on board data transfer controller (DTC) function, a form of state machine, while the MCU’s core is in stop-mode state. This ensures that the average power consumption is kept as low as possible, with IAV (average current) at 4.5 microampere (μA) and a 32 sample burst per second. The flow demonstration kit senses the flow direction and volumetric flow rate of water and gas, and can also detect reverse flow. The demonstration kit is applied using an active inductive method. Two coils are used to sense the rotational position of a part-metalized disk, and a third coil is used to generate a reference signal.

  • Thermistor liquid-immersion probe; 1/8" dia

    EW-08436-00 - Cole-Parmer Instrument

    Probes are accurate to ±0.1degC from 0 to 70degC. For tolerances outside of this range please see the introduction section on page 1081. All probes include certificate indicating traceability to NIST standards. Electrically isolated probes come with a nondetachable 10-ft lead with phone plug (except as noted). Water-resistant junctions between probe and lead should not be immersed; detachable leads are not water resistant. Note: Time constant is estimate time required to reach 63.2% of a new reading. To determine how long it will take to reach 99% of a new reading multiply the time constant by five.

  • Temp/RH Loggers

    HOBO MX2300 Series - Onset Computer Corporation

    With Onset’s new HOBO MX2300 Series Temp/RH loggers, field data collection has never been easier. You can set up and offload loggers wirelessly from your mobile device – eliminating the need to take a laptop or data shuttle into the field to retrieve data. The HOBO MX2300 Series offers five models covering a broad range of outdoor monitoring applications, from agricultural research to forest ecology studies. The series includes internal sensor models that are highly durable and easy to deploy, and external probe models that are well-suited for monitoring conditions in soils, water, walls, and more.

  • Voltage Testers

    DUSPOL - BENNING Elektrotechnik und Elektronik GmbH

    phase-sequence test (counter-clockwise / clockwise)single-pole phase test: " symbol (red LED)measuring point illuminationacoustic and optical continuity testfrequency measurement 1 1000 Hzvoltage indication 1 1000 V AC TRUE RMS / 1200 V DCresistance measurement and diode test with conducting-state voltage indicationlc display with background lightingsensor of non-contact cable break detectorload connection via large-scale push buttonsvibrating alert in the test handleshock-resistant housing with protection against dust and water jets (protection class IP 65) and rubberized test handleDIN EN 61243-3 (VDE 0682-401): 2015 standard

  • Tactical Power Supply

    API Technologies Corp.

    The Tactical Power Supply (TPS) Collection by API Technologies is a portable Commercial-off-the-shelf (COTS) DC Power Rectifier designed as a fielded generator for powering command & control communications systems and other critical EW & weapons equipment. The TPS features weatherproof & ruggedized construction which allows our rectifiers to withstand extreme temperatures (-40°C to 85°C) and harsh environments including shock, vibration, and water spray. When fielded, the DC rectifier reduces fuel consumption and wear and tear on vehicles by eliminating run time to support powering fielded special ops equipment.

  • Milk Analyzers

    MRC ltd.

    Measuring parameters: FAT 0.01% - 25%SNF 3% - 15%Density 1015 1040kg/m3Proteins 2% - 7%Lactose 0.01% - 6%Water content 0% - 70%Temp. of milk 1C 40CFreezing point - -0.400 0.700CSolids 0.4 1.5%1. Sample visualization onLCD display(green)2. Possibility to measure 1 sample 90 seconds(option 60 seconds)3. Adapter 220-110 V 4.Spare silicone tubes5. Syringe6. Plastic sample holder7. Calibrations Cow, Sheep, and UHT milk8. Operation Manual9. Cardboard transport case10. CD Service PackMeasuring time 30s

  • Hydrogeology

    HAPPIE - PASI srl

    The H.A.P.P.I.E. program (Hazard of Aquifer Pollution Potential Impact Evaluation) provides a conservative answer to the problem of determining risk levels in emergency conditions, which means that areas where illegal waste disposal sites, overflows and ruptures of impermeable sheeting are present and where water withdrawal should be discontinued can be identified. H.A.P.P.I.E. in fact offers a conservative response to the problem of the determination of the environmental impact in critical conditions that can usually be correlated to the requirements of defining areas in which the supply operations should be interrupted in emergency conditions, therefore in very short times and without the possibility of obtaining an accurate collection of the hydrogeological data.

  • Manual digestor blocks for effecient Kjeldahl analysis

    Labtec Line - FOSS A/S

    The Labtec DT 208 & DT 220 basic Digestion systems for Kjeldahl analysis consist of a digestion unit and a tube rack. The digestion units are insulated to minimise heat transfer to the surroundings and allow fast, even heating, thus giving good working conditions as well as saving energy. They are designed for batches of either eight (DT 208) or twenty test tubes (DT 220). Parameters:Kjeldahl digestions, Chemical Oxygen Demand & other reflux chemistries, Trace metal analysis by AAS or ICP instruments. Sample types: Raw materials and finished products in Food, Feed, Agriculture and related matrices, Water & Wastewater and a wide range of industrial compounds.