Filter Results By:

Products

Applications

Manufacturers

Showing results 916 - 930 of 960 products found.

  • The Impulse Guided Wave Radar

    AMETEK Drexelbrook

    The Drexelbrook Impulse is a two wire guided wave radar that employs field proven TDR level (Time Domain Reflectometry) technology to provide accurate measurement of Total Level, Distance or Volumetric outputs on all liquids and slurries. The Impulse is designed to tame even the most difficult level measurement applications and will continue to provide reliable and accurate measurements despite disturbances such as agitated, or irregular surfaces, foam or coating of the probe. It is unaffected by changes in density and dielectric properties, dusts, vapor, and turbulence. The Impulse simply keeps on measuring under conditions where other water level sensors quit.

  • UVC Detectors

    PMA 2122 - Solar Light Company Inc.

    The PMA 2122 Germicidal UVC detectors provide fast and accurate irradiance measurements of the effective germicidal radiation. Ultraviolet radiation at 253.7nm has been used in germicidal applications for several decades. The PMA 2122 is designed to be used with the PMA2100 or PMA2200 UV meters / Radiometers.Microorganisms (bacteria) ,usually in air or water, can be killed using UV or a combination of UV and ozone. The UV producing lamps in the purification systems must be monitored to insure that the bacteria are receiving a lethal dose of germicidal UVC radiation. The expensive UV lamps can be monitored to get maximum life out of the lamp before replacement. The germicidal UVC detectors can also be used to insure that the proper lamp has been installed after replacement.

  • Valve Leak Measurement System

    VLMS - G Systems, l.p.

    The G Systems Valve Leak Measurement System (VLMS) reliably measures slow leaks that are unidentifiable with conventional leak detectors, helping manufacturers test and ensure that critical valves are absolutely airtight. The G Systems VLMS is a self-contained counting instrument for automating the industry-standard practice of leak detection by bubble formation using a submerged tube in water. The G Systems VLMS provides accurate measurement of leaks that are too small for conventional flow meters to reliably detect and is ideal for applications that must be absolutely airtight, including medical device, pharmaceutical, oil and gas, and plumbing valves.

  • Vapor Sorption Analysis

    TA Instruments

    Vapor Sorption Analysis is a technique in which a sample is subjected to varying conditions of humidity and temperature, and the response of the sample is measured gravimetrically. Understanding the effects of water content on structure and properties is critical in the development, processing and end use of a broad spectrum of materials. TA Instruments offers the most sensitive, versatile, and productive moisture sorption analyzers on the market. The Q5000SA combines a high-sensitivity thermobalance, innovative humidity control chamber, and reliable autosampler. The VTI-SA boasts an integrated dew-point analyzer and organic solvent capability. Innovative technology combined with our unparalleled reputation for service and support make TA Instruments the clear choice of scientists worldwide for vapor sorption studies.

  • Professional Mobile Photometer

    P34 - Evoqua Water Technologies LLC

    The photometer P34 Professional meets all the requirements of modern water analysis. The device has a backlit display. Measuring range, reagent type as well as an automatic countdown timer for accurate response times are displayed. The internal memory stores up to 1,000 events with date, time and sample ID. The data can be retrieved at any time and transferred via an optional infrared module. The photometer P34 Professional serves, among others, to detect alkalinity, aluminum, bromine, chlorine, chlorine dioxide, chlorite, cyanuric acid, iron, urea, hardness, iodine, copper, sodium hypochlorite, ozone, PHMB, phosphate, pH, oxygen, acid, sulphate and hydrogen peroxide using various methods.

  • Haze Meter

    DRKWGT-2S - Shandong Drick Instruments Co., Ltd.

    DRKWGT2S transmittance / haze analyzer is a computerized automatic measuring instrument which is designed based on the People's Republic of China national standard GB241080 "transparent plastic light transmittance and haze test methods" and the American Society for testing and materials standard ASTM D100361 (1997) Standard Test Method for Haze and Luminous Transmittance of Transparent Plastice." It could apply to all transparent, translucent parallel plane sampler (plastic plates, sheets, plastic film,sheet glass) of light transmittance, transmission haze and reflectivity test also applies to liquid samples (water, beverage, pharmaceutical, colored liquid, grease) turbidity measurements in defense research and production workers and peasants to have a wide range of applications.

  • Tactical Power Supply

    API Technologies Corp.

    The Tactical Power Supply (TPS) Collection by API Technologies is a portable Commercial-off-the-shelf (COTS) DC Power Rectifier designed as a fielded generator for powering command & control communications systems and other critical EW & weapons equipment. The TPS features weatherproof & ruggedized construction which allows our rectifiers to withstand extreme temperatures (-40°C to 85°C) and harsh environments including shock, vibration, and water spray. When fielded, the DC rectifier reduces fuel consumption and wear and tear on vehicles by eliminating run time to support powering fielded special ops equipment.

  • Fixed Detectors

    Crowcon Detection Instruments

    Crowcon offers a flexible range of products which are able to measure flammable, toxic and oxygen gases, report their presence and activate alarms or associated equipment. We use a variety of measurement, protection and communications technologies and our fixed detectors have been proven in many arduous environments, including oil and gas exploration, water treatment, chemical plants and steel mills. They are used in many other applications where reliability, dependability and lack of false alarms are valued. These include within the automotive and aerospace manufacturing sectors, on scientific and research facilities and in high-utilisation medical, civil or commercial plants.

  • Fusion Splicer

    T43 - OrienTek Optical Technology Ltd.

    Core Alignment Fusion Splicer T43 Economical Solution for Integrated Fiber Preparation Tool DemandMain characteristics:● Electrode Life: 4,000 times splicing● 5.0 Color LCD Monitor● Average Splicing Loss: 0.02dB● Shock Proof, Dust Proof and Water Proof● HD CMOS sensor and HD aligner for duble seperate optical fibers● The carrying case built-in worktable● Up to 200 times of continuous splices and heat● Splice 0.25mm/0.9mm/3.0mm/ Flat cable● Ideal for both indoor and outdoor splicing● Take only 9 Seconds for Splicing,30 Seconds for Heating

  • Fusion Splicer

    T43 - Tinius Olsen

    Core Alignment Fusion Splicer T43 Economical Solution for Integrated Fiber Preparation Tool DemandMain characteristics:● Electrode Life: 4,000 times splicing● 5.0 Color LCD Monitor● Average Splicing Loss: 0.02dB● Shock Proof, Dust Proof and Water Proof● HD CMOS sensor and HD aligner for duble seperate optical fibers● The carrying case built-in worktable● Up to 200 times of continuous splices and heat● Splice 0.25mm/0.9mm/3.0mm/ Flat cable● Ideal for both indoor and outdoor splicing● Take only 9 Seconds for Splicing,30 Seconds for Heating

  • Handheld Multi-Parameter Measurement Systems

    MultiLine Multi 3630 IDS - WTW

    Triple – 3 channels, 4 parameters: Three measuring channels, freely combinable for same or different parameters: The simultaneous multi-parameter measurement without compromise. Use also the wireless modules together with the nee IDS plug head sensors, be independent from cables and measure conveniently also at hardly accessible locations. Another highlight: This meter allows the operation with the digital multi-parameter probes MPP 910 IDS and MPP 930 IDS. The Multi 3630, just like the MultiLine® series, has a brilliant color graphic display and two USB interfaces. The batteries can be charged directly in the device. The activing user administration can also be used alternatively to mark measuring points. The 10,000 data sets include up to three main parameters, three temperature values as well as the water depth if using the depth probe.

  • Flat Belt Tire Test Machine

    A&D Technology, Inc.

    The A&D Flat Belt Tire Test Machine is an indoor tire force and moment testing machine. It allows the tire to be tested against a flat surface under dynamic conditions. The flat surface is emulated by an electrically controlled belt-pulley assembly while the tire load is supported by an air bearing (for passenger cars loads) or a water bearing (for higher loads) that is present under the belt. This belt-pulley assembly rests over a hydraulic shaker system that can emulate tire vertical motion and slip-angle generation in a highly dynamic fashion. The tire stand itself is capable of changing the tire vertical load and camber angle during the test run. Forces and moments experienced by the tire are measured at a high sample rate using A&D’s 6-component Plate Force Sensor (PFS) mounted on the tire stand. The configuration, range and performance can be customized depending upon the intended application.

  • Gas Filter Correlation CO Analyzer

    Model T300U - Teledyne Advanced Pollution Instrumentation

    The Model T300U Trace-level CO analyzer has been developed specifically to address the challenges of low level monitoring as required, for example, in the US NCore network. Using IR absorption with a Gas Filter Correlation Wheel, the T300U is designed to allow ultra-sensitive CO measurements while still meeting the requirements for use as a US EPA compliance analyzer.The optical bench is enclosed in a temperature controlled oven, dramatically decreasing instrument noise and drift. The objective and field mirrors in the sample cell are gold plated to maximize signal to noise performance, while a temperature-controlled Nafion dryer on the inlet minimizes water interference caused by ambient humidity changes. Periodically, the T300U seamlessly corrects its baseline by routing the sample through a heated catalytic CO scrubber. This Auto Reference function corrects zero drift and reduces the effect of interferences.

  • Non-Contact Voltage Tester

    NCVT-3 - Klein Tools, Inc.

    Provides non-contact detection of AC voltage.Detects 12 – 1000V AC with simultaneous visual and audible voltage indicators.Bright flashlight illuminates work area and may be used independent of voltage detection function.Visual LED bar graph indicates the presence of voltage – the higher the voltage sensed, or the closer to the voltage source, the more LEDs light up.Bar graph visual voltage indicator utilizes up to five vibrant LEDs for easy interpretation/viewing.Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source.“Auto Power-Off” conserves and extends battery life.Screw-thread battery cap with O-ring ensures protection against dust and water ingress.Lightweight, compact tool with pocket clip provides convenient storage and quick access.IP67: Dustproof and waterproof.6.6 feet / 2 meter drop protection.CAT IV safety rating for 1000V.Conforms to CE requirements.

  • Miller 400D

    44550 - M. C. Miller Company

    No need to select ranges or adjust dials – the Miller 400D provides a direct read-out of resistance with the push of a button• Bluetooth interface allows optional data-logging via a Bluetooth-enabled PC (or PDA)**• Rugged, hard plastic case - safe to use on wet ground – IP67 rating for dust and water intrusion• Resistance measurement range from 0.01Ω to 10MΩ (auto-ranging) • High resolution digital display• Resistance measurements are unaffected by any stray interference signals that may be present in the earth during readings, due to the use of narrow band-pass filters centered at 82.2Hz (the unit’s operating frequency)• Runs on a set of replaceable D-cell alkaline batteries...no need to periodically recharge the unit or to plug it into a power source• Performs 10,000 single readings on a fresh set of batteries• Integrates with Universal Rectifiers’ Soil Depth Selector/Multi-Pin Cable Harness System (please see Integration with Universal Rectifiers’ Cable Harness)