Filter Results By:

Products

Applications

Manufacturers

Water

llquid state of H2O.

See Also: Water Quality, Water Meters


Showing results 931 - 944 of 944 products found.

  • Meter Pulse Splitter

    SY027 - Synectic Electronics

    The SY027 is designed to convert pulses from meters or other turbine devices and transmit the same pulse via two relay outputs to enable two separate instruments to measure the rate simultaneously. It can be used with electricity, gas, or water meters. The SY027 PSO has been designed for applications where a pulse is required to be isolated, re-powered and repeated on two separate outputs. It works with inputs from reed switch signals,Opto coupler, open collector, NAMUR or TTL pulse (up to 25V) with automatic debounce, as well as with high frequency pulses . The speed of pulses can be accommodated from very slow to super-fast.The standard frequency range is up to 1 kHz and a maximum switching voltage of 280V, we also have an extra fast version for a small extra charge we can reproduce pulses up to 5 kHz with a maximum switching voltage of 60V.

  • Outdoor Infrared Motion Sensor

    ENVIROMUX-IMD-O - Network Technologies Inc

    Outdoor weatherproof - high reliability against water and insects. Double conductive shielding to eliminate false alarms from light sources. Registers movement in the area covered: 40 ft (12 m) x 50 ft (15 m) - 120° wide. LED lights during detection. Selectable detection paterns: Multi-Level (40 zones) or Pet Alley (18 zones). Unwanted detection areas can be eliminated using the included area masking strips. Selectable Sensitivity: High, Mid and Low. Adjustable to the brightness of surrounding environment with the Day/Night Mode switch. Tamper switch opens when cover is removed. Screw terminal. To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal. Operating temperature: -4 to 122°F (-20 to 50°C). IP54 compliant. Powered by ENVIROMUX-2D/5D/16D.

  • Power Timer

    KONSTAR ELECTRIC INDUSTRIAL CO., LTD.

    There are most 16 combinations of switches in one day. 16 combinations of different switch procedure can be set every day at will. The shortest time interval is 1 minute. Manual and auto, have the function of dormancy and summer time at the same time. Connect directly, have the characteristics of small volume, low watt loss.wide range of work temperature and strong anti-interference ability. It can control neon light, advertising lamp.street light, automatically water supply and charge-in of livestock breeding. Automatic work of machine tool and various electric cabinets, auto control of distribution box etc, It can turn on and turn off the light. TV and air condition etc in fixed time, Then let you family get into the intelligence turns in advance.

  • Quad Input Digital Logging Thermometer

    DT304 - UEi Test & Measurement Instruments

    UEi Test Instruments designed the DT304 to offer professionals a fully featured, IP67-rated digital logging thermometer. Designed for the real world, the DT304 is a four-channel thermometer with an easy-to-read backlit display, built-in thermocouple storage and a protective rubber boot. The DT304 includes real-time data logging of up to 9,999 measurements and measures -346-Degree to +2192-DegreeF (Type J) and -328-Degree to +2498-DegreeF (K). The IP67 rating ensures the product is water- and dust-proof UEi Test Instruments has over 45 years experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. UEi Test Instruments are sold throughout North America and Canada and professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi's NIST-certification laboratory is compliant with ISO17025. UEi backs its products with dedicated technical support, service and repair teams.

  • The Nanomotor®

    Klocke Nanotechnik

    The patented Nanomotor® is a piezo driven linear motor. It is a multifunctional basic part for many positioning and manipulation devices. It has a positioning stroke of up to more than a centimeter while operating with atomic resolution. The Nanomotor thus bridges eight orders of magnitude. The Nanomotor consists of a cylindrical housing and a slider with a free axial hole inside. It combines high resolution in the sub-nanometer range with a large positioning stroke. The Nanomotor utilizes a piezo tube for fine positioning and a shock wave produced by the same piezo tube for coarse movements. The small Nanomotor is half the size of a match stick. It can lift six times its own mass. Every point of its stroke can be reached with a speed of up to 1 mm/s. The Nanomotor also works in ultrahigh vacuum or even under water. It is driven by a PC card at a supply voltage of only ±15 volts.

  • Variable Area Flowmeter and Switches

    Kobold Instruments, Inc.

    Flowmeter is ideal for difficult applications requiring high pressure, high temperature operation or low pressure loss. Its all-metal, armored design is available in stainless steel or PTFE-clad stainless steel. This flowmeter is unique in that its design employs a guided float and spring return mechanism that allows the BGF to be installed into both horizontal and vertical pipes. In standard configuration, the flowmeter is a purely mechanical meter suited for water and compressed gases in line sizes up to 3 inches. Electronic limit switches and/or an analog flow transmitter may be added if desired. Analog output is supplied standard with HART protocol. Profibus-PA and Foundation Fieldbus are also available as an option. Available switches and analog outputs include those that operate via intrinsically safe methods of protection and may be used in hazardous areas where intrinsically safe installations are permitted. Custom designs for high pressure operation, special fittings and special materials of construction are available upon request.

  • Ultra Temperature Chest

    Torontech Group

    Equipment structure uses a stainless steel plate for hull painting, providing not only a good profile, but also fine corrosion resistance.Utilizes a closed-type compressor unit with a solid and durable structure that can greatly enhance the service property and life of the equipment. With an advanced energy-saving design, the unit can save electric power by 30% and water by 20%. In addition, it uses an HFC refrigerant that will not harm the human body or the natural environment, enabling operators to conduct tests in a safe way.Incorporates an advanced and innovative control theory that integrates the three control systems of PLC, HMI, and SOC to ensure 100% accuracy.Utilizes an ETAc820 colour touchscreen as TEMI operating interface, as well as the most powerful and reliable PLC and special modules in the industry, providing users with 50 programs and 2500 steps for setting/storage and operations.Utilizes a protection module that is able to withstand up to 500V to ensure safe voltage. After the equipment is energized, this module provides it with 100% protection from burning.

  • Measure Sensors

    Zhuhai Measure Science and Technology Co. Ltd

    Laser sensors can detect, count, trigger, map, profile, scan, and guide as well as verify levels, proximities and distances to practically anything you can think of. Our Laser Distance Sensor MSD30/60/100 are use for the Plant Management and Automation, Security and Surveillance, Vehicle Guidance and Automation and Traffic Management. Such as Car safety range warning, Intelligencespatial orientation, Contour scanning, Aircraft intelligence:control,obstacles, Ship: navigation, beach safety, Space scanning mapping, Safety monitoring and protection of landslides, tunnels, mines, bridges, etc. Flood warning of water level monitoring, intelligent monitoring of crude oil storage, Speed measurement application. They are used where small objects or precise positions are to be detected. If you want to used them we would like to send you the communication protocol and other documents.

  • Bubble Humidifier

    Fideris - Fideris

    Fideris™ Bubble Humidifier for Process and Reactant Gas Humidification The Fideris™ Bubble Humidifiers are dewpoint based humidification modules for the saturation of a process gas or reactant gas to a target dewpoint. These contact type humidifiers are fabricated from materials suitable for use in demineralized water, such as 316 stainless and Inconel. Operation temperatures up to 120°C and 5 bar are standard with higher pressures and temperatures available. Features include automatic reservoir refill, computer interface, and temperature control of heated gas lines to prevent condensation between the humidifier and the process. Safety is paramount with Fideris equipment so the bubble humidifier includes over-temperature limit controllers on heaters, overpressure cutouts, and overpressure rupture disks. The Bubble Humidifier has other advantages as well: it does not build up a biofilm, and it supplies a consistent humidification level, both of which are very common problems in membrane-type humidifiers. The Fideris Bubble Humidifier units are but one of the many type of humidification systems available, others include real time liquid water metering, flash evaporation, live steam injection, and the highly accurate saturate-and-trim humidifiers. The Fideris humidifiers integrate seamlessly with over a hundred other physical process control modules in the Fideris product line. Available as stand-alone units or complete turn-key systems, Fideris brand equipment covers nearly all aspects control and monitoring for test systems, reactors, laboratory automation, sensor testing, environmental chamber atmosphere control, quality control, and many other applications. Relax. Choose Fideris.™

  • Industrial Cameras

    GigE uEye FA Series - IDS Imaging Development Systems GmbH

    The GigE uEye FA industrial camera with Gigabit Ethernet interface is our power pack and all-round talent. The camera housing, lens barrels and connectors fulfill the prerequisites for protection code IP65/67 and protect your industrial camera from dirt, dust, water splashes or cleaning agents as well as accidental shifting of the optics. The screw-on connectors also meet the most demanding industry requirements – an 8-pin M12 connection with X coding for data transmission and Power-over-Ethernet (PoE) and an 8-pin Binder connector for GPIO, trigger and flash are available. An extensive range of accessories, including cables suitable for use as drag chains, and various screw-on options enhance versatility and facilitate integration. Ideal for multi-camera operation: An integrated image memory decouples image acquisition from image transfer. Internal camera functions such as pixel preprocessing, LUT or gamma minimize the processing power required. Only with IDS: if you opt for cameras of the new GigE uEye FA series, you have the freedom to choose between the proven IDS Software Suite or support of the GigE Vision standard. Thanks to the unique IDS software, you also experience real USB plug & play, even for GigE cameras: The cameras are automatically detected in the system and are ready for use immediately.

  • Automatic Pull-Off Adhesion Gauge

    510 - Elcometer Limited

    Automatic hydraulic pump ensures smooth and continuous pressure application for consistent, repeatable adhesion strength resultsFully adjustable pull rates 0.1-1.4MPa/s (14.5-203psi) to meet National and International StandardsCan be used with 10,14.2, 20 and 50mm diameter dolliesUser definable limits with unique pressure hold and release functionUser definable measurement range with an accuracy of ±1% of full scale:10mm dolly: 100MPa (14400psi14.2mm dolly: 50MPa (7200psi)20mm dolly: 25 MPa (3600psi)50mm dolly: 4MPa (580psi)Dust and water resistant rugged design to IP64Interchangeable units: MPa, psi, Nmm2 and NA range of standard and thin substrate actuator skirts (compatible with Elcometer 506) available for adhesive strength testing on thick, thin, flat or convex substratesStore up to 60,000 readings with individual pull graphs in up to 2,500 alpha numerical batches, complete with attribute failure informationUSB and Bluetooth® data output - compatible with ElcoMaster® App for iPhone, iPod, iPad and Android mobile devices

  • Portable Analyzers

    Alpha Moisture Systems

    The key to the operation of Alpha Moisture Systems' Portable Analysers is the unique Desiccant Dry-Down Chamber. By keeping the sensor dry between tests, the special assembly of the head ensures that the instrument is always ready for immediate use. The head assembly consists of two chambers which have a telescopic action. When the head assembly is in the 'closed' or 'Dry-Down' position, the sensor is completely surrounded by desiccant, which absorbs the remaining water moisture from the sensor and hence it is dry and ready for use. The small space at the bottom of the test chamber enables the sample pipe to be purged before the test commences without wetting the sensor. By placing a finger over the outlet of the head, the sample pressure is able to open the test chamber automatically, exposing the sensor to the gas being tested and enabling accurate reading of moisture content in the sample gas. After each test the head assembly is closed by depressing the inner section so that the sensor will again be dried by the desiccant, leaving the sensor ready for use time and time again. The desiccant is kept in the inner chamber and is not exposed to ambient room air or the sample gas, therefore there is no need for frequent regeneration or replacement of the desiccant.

  • Archival Storage Rooms

    Darwin Chambers Company

    Darwin Chambers Company’s NFPA, GSA, and NARA Directive 1571-compliant Archival Storage Chambers are engineered to provide maximum value, efficiency and conformance with all applicable standards and codes. Archival chambers provide environmental controls for storing records and materials (including paper documents and items with high fibrous content, various films, microfiche, and photographic materials) that require permanent protection for storage and preservation. Our high-performance systems are offered with nearly unlimited operational fail safes, includ- ing full system and control redundancy. In addition to keyed entry, numerous security options are also available, due to the often irreplaceable nature of the materials to be stored and preserved in this type of chamber. Our chambers are engineered to accommodate the loads and unique requirements of the specific materials to be stored, with industry-leading control and uniformity of both temperature and humidity variables. Design considerations include both functional and operational efficiencies and reliability, the safety and comfort of operating personnel, and the ongoing protection of the archived materials from fire, water, light degradation, pests, mold and natural contaminants, pollutants and other man- made threats.

  • Metal Detector

    Dor Yang precision instrument (Shanghai) Co.,Ltd

    1.Fully Automatic and All Metal Detectors - Your detector detects all kinds of metal objects. Unless you have set for some objects that you don’t want to detect.2.LCD – The LCD with light, it improve to identify the metal in night or caliginous outside. 3.Target Identity - The detected objects are shown on the LCD display. You can decide immediately if the objects worth to be recovered.4.Unwanted Target Elimination - You can set the detector not to respond to some objects.5.Unique Tone for Target - You don’t have to keep watching the LCD display, when an object is being detected, an unique tone corresponding to a target will generate. You may even searching when there is little or no light.6.No Clumsy Slack Cable - hidden search coil cable (connecting between control unit and search coil) avoid entangling and for ease of stem length adjustment.7.Headphone Jack - provided for headphone connection. Both stereo or mono headphone can be used.8.Volume Control - for adjusting the output volume to the loud speaker or headphone.9.Batteries Condition Indicator - shows the conditions of the batteries in the battery compartment.10.Waterproof Search Coil - lets you use the detector in the shallow water.11.Adjustable Stem - lets you adjust the detector’s length for comfortable use. The micro-plug that connects the search coil and the controller unit is made of metal which makes the plug more reliable.