Showing results 1606 - 1620 of 4461 products found

  • Digital Portable Panel Meters

    Company: Standard Electric

    Big-size LCD (112 x 59mm)● Backlight function.● Analog scale with Bar-graph for viewing. (100 bars)● 10000 counts (high resolution).● DCV Ranges: 99.99mV~999.9V (ST-2001 DCV). ● ACV Ranges: 99.99mV~800.0V (ST-2001 ACV). ● 5 manual ranges controlled by rotary switch.● Data Hold function● Low battery indication● 9V power supply● Best resolution of 0.01mV (10uV)● Precision meter for factory maintenance, field servicing and educational purposes.● With an optical USB to RS-232 data transmission cable. (DCV-R & ACV-R)● 2 optical LEDs are built-in for data transfer. (DCV-R & ACV-R)● Well isolated to contact. (DCV-R & ACV-R)● The software is included (Compact disc). (DCV-R & ACV-R)

  • MGM - DC Milligauss Meter

    Company: Alpha Lab

    An improvement on the flux gate magnetometer, the DC Milligauss Meter measures magnetic fields (technically "flux density") up to several times the strength of the Earth field. It has a resolution of 0.01 milligauss (1 nanotesla) and a range of +/-2000 milligauss (200 microteslas). The meter's magnetoresistive sensor is a major improvement over an uncompensated fluxgate magnetometer both in cost and stability. In fact, this sensor approaches a proton precession magnetometer in temperature stability. However, at only 1 mm x 0.2 mm, the active sensor area is much smaller than fluxgate magnetometer or proton sensors. This allows very precise magnetic measurements in small areas (such as thin films) or with high gradients, when necessary.

  • 2511 - Datalogging Sound Level Meter

    Company: Baseline Technologies

    The latest addition from Cygnet to our range of Datalogging SLMs is this versatile meter, ideally suited for environmental studies, and general sound data logging for hotels, factories, construction sites, railways, and anywhere where there are varying sound levels. It logs the Leq dB(A) values with timestamp on your pendrive. It can start upon command or in accordance with a preset timetable. The data on the pendrive can be read directly into your PC as an Excel file. Additional statistical analysis is also possible on the PC. An optional miniature printer can print the data on a thermal paper roll on the spot. The 2511 is a Type 1 accuracy instrument.

  • DF-210B / DF-211B - On-Board Digital Flow Meter

    Company: Ono Sokki

    The DF-210B / DF-211B are small-size, light weight and a low-profile with approx. 3 cm thickness flow meters designed for use on vehicles. The DF-210B measures instantaneous flow and accumulated flow with high resolution at 0.01 l/h in combination with FP-2140H / 2240H Positive-displacement Flow detectors. The DF-211B Extension Unit provides additional function to display the pressure, temperature, and elapsed time on-vehicle measurement. Portable battery box, DF-021A, is provided as an option, which is used to supply power to both units using its internal dry cell in case that the enough power supply is difficult on vehicle.

  • HD 8701 - Sound Level Meters

    Company: Delta OHM S.r.L.

    The sound level meter HD 8701 is a portable instrument, easy and quick to use, suitable for measuring industrial and civil noise levels. The noise levels can be read easily in dB (A) on the large liquid crystal display which also shows all the information concerning the mode of operation of the instrument. One second after switching on and with a resolution of 0.1 dB, the digital reading gives the continuously updated value of the RMS sound pressure level, with a type A frequency weighting. The single range from 30 to 130 dB further simplifies the use of the instrument, as the user does not have to change scale.

  • Swain Meter™ Sensors

    Company: The Swain Meter Company

    Swain clips and clamps (MER2® Sensors) are constructed to reduce zero offset error and manufactured with aperture diameters from ¾” to 100″+ to date.Swain Clips & Clamps are hand crafted of quality materials with attention to detail.Clips and Clamps form a 360° closed loop around a conductor.Swain Clips and Clamps are also referred to in literature as “Sensors”.Swain Sensors are rugged and well suited for work in most environments including bridges, rigs, utilities, underwater and for offshore corrosion protection. .Our technicians build each meter and corrosion sensor by hand and calibrate them to exact specifications.

  • MME-UT 20 - Universal Tester with LCR meter

    Company: Minmax Electronics

    MME - UT 20 is the latest Microcontroller based Universal IC tester with LCR Meter from Minmax Electronics. It functionally tests 74 series of TTL ICs 40 & 45 series of CMOS ICs, Analog/Linear ICs op amps, comparators, timers, transistor arrays, ADC, DAC etc., It also tests components like diode, transistors, UJT, FET, SCR, Displays, Regulators (78/79) and DIP relays. It also measures the values of Inductance (L), Capacitance(C) and Resistance(R). MME-UT 20 has Rs232 Serial Interface through which IC test Library could be expanded.

  • HTZZ-50A - Transformer Resistance Meter

    Company: Wuhan Huatian Electric

    Transformer Resistance Meter is an essential test project during transformer delivery, repair and changing tapping switch. Usually, it is a time consuming task to use traditional methods (bridge method and voltage drop method) to measure transformer winding and DC resistance of high-power inductive device. In order to change this situation: shorten measurement time and reduce the staff's workflow, our company has developed DC resistance rapid tester. The instrument using new power technology, with characteristics such as stable performance, rapid test, small size, light weight, easy operation, high measure precision and good data reproducibility, is the ideal equipment to measure transformer winding and DC resistance of high-power inductive device.

  • HTZZ-10A - Transformer Resistance Meter

    Company: Wuhan Huatian Electric

    Transformer Resistance Meter is an essential test project during transformer delivery, repair and changing tapping switch. Usually, it is a time consuming task to use traditional methods (bridge method and voltage drop method) to measure transformer winding and DC resistance of high-power inductive device. In order to change this situation: shorten measurement time and reduce the staff's workflow, our company has developed DC resistance rapid tester. The instrument using new power technology, with characteristics such as rapid test, small size, light weight, easy operation and high measure precision, is the ideal equipment to measure transformer winding and DC resistance of high-power inductive device.

  • HTZZ-20A - Transformer Resistance Meter

    Company: Wuhan Huatian Electric

    Transformer Resistance Meter is an essential test project during transformer delivery, repair and changing tapping switch. Usually, it is a time consuming task to use traditional methods (bridge method and voltage drop method) to measure transformer winding and DC resistance of high-power inductive device. In order to change this situation: shorten measurement time and reduce the staff's workflow, our company has developed DC resistance rapid tester. The instrument using new power technology, with characteristics such as stable performance, rapid test, small size, light weight, easy operation, high measure precision and good data reproducibility, is the ideal equipment to measure transformer winding and DC resistance of high-power inductive device.

  • TTRM 302 - Transformer Turns Ratio Meter

    Company: Scope T&M Pvt Ltd

    SCOPE introduces state of the art precision three phase Transformer Turns Ratio Meter (TTRM ) designed for fi eld testing as well as factory testing of power transformers, instrument transformers and distribution transformers of all types. Along with turns ratio, this light weight and reliable instrument measures ratio deviation, phase angle deviation, magnetizing current and detects tap-position of single as well as three phase transformers in charged switchyard condition. The instrument has facility to automatically detect vector group of all majority configurations available. The diff erant AC voltage selection off ers high accuracy in measurement.

  • 130 - Salt Contamination Meter

    Company: Elcometer Limited

    Key features of the Elcometer 130 Salt Contamination Meter include: Fast reading rate allows multiple conductivity tests to be completed efficiently Pressure plate ensures a constant and uniform pressure to paper Automatic detection of paper size and automatic adjustment of reading value USB and Bluetooth® data output to ElcoMaster® software Dust and water resistant rugged design equivalent to IP64 Automatic temperature compensation ensures accurate results Non-oxidising gold plated contacts ensures lifetime accuracy Stores up to 150,000 readings in 2,500 alpha numeric batches Fully portable hand-held, ergonomic design ideal for use in the field

  • ST-HDoC-MM - Installation & Test Meter

    Company: SecurityTronix

    The SecurityTronix ST-HDoC-MM is designed for maintenance and installation of HD-CVI, HD-TVI, AHD, SDI and analog cameras as well as other security equipment. It’s 3.5” 480 x 320 resolution screen enables it to display images from HD cameras and analog cameras in top quality. The unit supports HD over coax, PTZ, ONVIF PTZ and analog PTZ controls. In addition, the tester is also a great tool for Ethernet networks and cabling systems. It includes the ability to test network cables while verifying the sequence of the individual conductors. The meters portability, user-friendly design and multi-function capability make it an essential tool for installers and technicians, greatly improving work efficiency and simplifying installations and system maintenance.

  • ST-HDoC - Installation & Test Meter

    Company: SecurityTronix

    he SecurityTronix ST-HDoC is designed for maintenance and installation of HD-CVI, HD-TVI, AHD and analog cameras as well as other security equipment. It’s 3.5” 480 x 320 resolution screen enables it to display images from HD cameras and analog cameras in top quality. The unit supports HD over coax, PTZ, ONVIF PTZ and analog PTZ controls. In addition, the tester is also a great tool for Ethernet networks and cabling systems. It includes the ability to test network cables while verifying the sequence of the individual conductors. The meters portability, user-friendly design and multi-function capability make it an essential tool for installers and technicians, greatly improving work efficiency and simplifying installations and system maintenance.

  • FTBx-1750 - High-Performance Power Meter

    Company: EXFO

    Designed for the new LTB-8 Rackmount Platform, the FTBx-1750 High-Performance Power Meter and the OHS-1700 Optical Head deliver speed, accuracy and flexibility in a platform-based solution. The FTBx-1750’s unique, patented design saves time, cuts costs and significantly enhances throughput with its Continuous-mode peak-acquisition speed of 5208 acquisitions per second. Its 80 dB range and 300 μs stabilization time allows you to simultaneously measure high and low signals on one or two channels.Test more components with a single, small-footprint module, thanks to the FTBx-1750''s two-channel capability.

Products

Applications

Manufacturers