Filter Results By:

Products

Applications

Manufacturers

Meters

sense, display, measures; gas, water, electricity, particles, vibration, light or quanta.

See Also: Sensors, Measurement


Showing recent results 3166 - 3180 of 4357 products found.

  • HD/SD SDI De-embedder

    Compact-Duo HD - Murraypro Electronics

    ?Touch Latch? selection between the 4 embedded Groups provides Flyaway Kit, Edit Suites and CARs with comprehensive and cost effective monitoring facilities. The generously sized "Type 22" meters allow practical audio level monitoring with extended separation between meter and monitor in larger Control Rooms. Instant selection between Channel 1 & 2 or Channel 3 & 4 of the selected Group is performed by the front panel switch.

  • High Current DC Load

    3350F Series - PRODIGIT ELECTONICS CO.,LTD.

    Power ON status can be set? 5 digit V/A/W Meter? CC, CR, CV, CP, Dynamic and Short operation mode? High-speed measurement and communication transmission? SHORT time setting? Large LCD Display?setting values can be adjusted by rotary knob or push button? Protections against V,I,W, and ?? Voltage ?Current and Watt value can be displayed simultaneously? Voltage meter display the polarity positive ("+")or negative("-")is selectable? OCP ? OPP test function? Optional Interface: GPIB?RS232?USB?LAN

  • High Power Thermal Sensors & Power Pucks – 1W to 120kW

    15K-W-BB-45 - Ophir Photonics

    The 15K-W-BB-45 is a water cooled thermal power/energy laser measurement sensor for very high powers with a 45mm aperture. It can measure power from 100W to 15,000W. It has a deflecting cone and annular absorber that withstands high power densities to 10kW/cm². It covers the spectral range from 0.8 - 2 and 10.6µm. The sensor comes with a standard 5 meter cable for connecting to a meter or PC interface.

  • Digital Megohmmeter Test Kit

    STME-RT1000F - Statclean Technology

    This is a Resistance-Resistivity-Humidity-Temperature Test Kit. It is easy to operate, compact, lightweight, portable meter designed to measure temperature, humidity, and electrical resistance/resistivity. It has both internal and external test probes. The meter will measure resistivity, resistance between two points, and resistance to ground according to EOS/ESD Association Standards, -S4.1, S6.1, S7.1, S11.11, and European Standard CECC-EN 1000/15

  • Digital Static Locator

    350 - ACL Inc.

    The ACL 350 Digital Static Locator is a non-contact meter that indicates electrostatic field voltage and polarity on charged surfaces. This easy-to-use instrument comes equipped with a "Power On/Hold" button, a "Zero" button and a unique retractable one-inch spacer. The meter automatically shuts off after approximately 90 seconds. The easy-to-read 3-1/2 digit LCD automatically updates three times per second.

  • Digital Earth Resistance Testers

    Weschler Instruments

    The EY200 performs three-pole and two-pole earth resistance and earth voltage testing of electrical equipment and systems wiring and grounding to reduce power quality issues and avoid safety hazards. The meter is portable, small, lightweight, and designed for ease of use with one-touch button and one switch operation. The LCD screen can display up to 1,999 digits for measurement readings. The meter warns the user when earth resistance of auxiliary earth spikes exceeds the permissible limit.

  • Digital Leeb Hardness Tester

    TIME®5310 - Beijing TIME High Technology Ltd.

    TIME5310 is an advanced digital Leeb hardness tester developed with advanced micro electronic technology. It is loaded with all the features for metal hardness testing, such as probe auto recognition, large memory, USB output, removable printer, software, etc. The improved display makes it is much easier to read the values. TIME5310 digital hardness meter is a must have for testing in the field or in the lab. By the way, there are newly designed probes for this hardness meter now.

  • Dual channel AC millivoltmeter

    RVT-322 - Shenzhen Meiruike Electronic Technology Co.,Ltd

    RVT322 type AC millivoltmeter have two channel input terminals,the available channels range from 10Hz to 1MHz,the measuring voltage from 300V to 100V,the two channel input signal can be measured simultaneously or separately by switch different setting of button,the meter input the signal through the BNC terminal,which can eliminate the influence of the external sensor signal in the condition of low electrical level measurement,it can be easily connected with the oscilloscope for the waveform inspection,or make the meter as a preamplifier.

  • Electricity Metering Device- Residential

    Mk32H - EDMI

    Designed for residential use, Mk32H is a DIN Rail single phase meter with integrated 100A UC3 compliant relay. It is able to operate in either STS compliant prepaid mode or post-paid mode.Mk32H can operate with the EDMI CIU (Customer Interface Unit) – HD18 wirelessly as a split meter as well as operate with EDMI gateway – GW30 and the EDMI Head End System – MultiDrive as a complete AMI system.

  • Energy Metering ICs

    Analog Devices Inc.

    Analog Devices’ ADE energy measurement ICs address the challenges of next-generation smart meter architectures and are ideal for measuring active energy (kWh), apparent energy (kVA), reactive energy (kVAR), rms, and power quality with the highest accuracy in single phase and polyphase revenue meters, industrial instruments, and energy monitoring applications. ADI’s ADE energy measurement ICs combine analog-to-digital converters with fixed-function digital signal processors to perform critical measurements, while providing unparalleled functionality and ease of use.

  • DC Voltmeters

    DMS-30DR Series - MeterCenter

    The DATEL DMS-30DR Series are the first digital panel meters to offer LED displays that are readable in direct sunlight—no special filters or shading devices are required. Their Autodim circuit automatically adjusts the display's brightness to suit viewing environments ranging from total darkness to full, brilliant sunlight. A user-accessible brightness adjustment pin enables custom intensity settings or display matching in multiple display applications. These meters require an external 5 Volts (typ.) for power.

  • Resistivity Imaging Systems

    Heritage Geophysics, Inc.

    Heritage GeoPhysics is pleased to announce the new multinode resistivity imaging option of its subcompact resistivity meter, the Syscal Kid. Specially designed for shallow resistivity imaging the Switch 24 features an internal switching board supporting 24 electrodes. Two cable strings with 12 electrode take outs each are connected to the back of the meter. Software is provided to automatically perform roll along surveys.

  • Power Sensors

    Telemakus LLC

    Our power sensors are ideal for use in RF and microwave testing and prototype development. USB power sensors are capable of measuring peak power and average power of a power meter. An added benefit of our power meter sensors is that they are compact and portable. The sensors are powered by your computer’s USB port so setup is fast. To use, simply plug into your computer and your power measurements are determined by a free utility that runs on any XP or Vista PC.

  • Power Transformer

    Shanghai Himalayal Co.

    Transformer turn ratio meter is special designed for power transformer (single phase & three phases) and instrument transformer testing, suitable for testing in substation, transformer manufacturer, meter manufacturer. It helps to detect faulty transformer winding and tap changer position. It’s fully automatic device, can recognizes winding connection and vector group number of transformer winding. The user only need connect measuring cable and press start button and come out the test result.

  • Precision Current Shunt

    7550 - PRODIGIT ELECTONICS CO.,LTD.

    Model 7550 has five precision selectable Ultra stable Current Shunts which ranges from 0.001 to 10£[. The Shunt T/C is less than 10ppm, and the internal current meter will measures from 1mA to 250Amps. The Five selector switches, Shunts, Binding Post and the internal 4 1/2 Digit AC / DC Current Meter displays the respective shunt current. Adding an external DVM (with 5 1/2 digit or Higher) will increase both resolution and current reading accuracy.