Meters: sense and display measures of gas, water, electricity, particles, vibration or light.

Showing results 376 - 390 of 4487 products found

  • Energy Meter

    Company: PeakTech Prüf- Und

    New designed, high-precison Energy Meter for detecting the energy consumption of electrical appliances and to calculate the total cost of the electricity consumption of a device by entering the current price. Through the integrated power factor calculation all modern electronic consumers such as switching power supplies, TVs, fluorescent lights, LED systems and of course, resistive loads such as electrical heaters and hobs are precisely measured. In addition, due to the high resolution and the low response, even very small or standby loads are measured from approximately 1W.

  • EM-4055 - Earth Meter

    Company: Megabras Srl

    The EM-4055 Earth Meter is a digital, microprocessor-controlled instrument that allows to measure the earth resistance and ground resistivity (using Wenner´s method), as well as to detect parasitic voltages present in the ground. This instrument is well suitable to measure earth systems in power substations, industries, distribution networks, etc., according to VDE 0413. It is also suitable for soil resistivity measurements, in order to optimize the earth systems project

  • ESM-2 - Electrostatic Meter

    Company: ROM-Elektronik GmbH

    Our new development, ESM-2 electrostatic meter (successor of the tried and tested ESM-1) measures this alternating voltage via a hand-held probe against ground and displays its value digitally and thus easily readable. If the measured voltage exceeds certain values defined in the "Electrobiological standard", it can be reduced to noncritical values by means of targeted, usually simple, measurements.

  • MF300F+ - Ferrite Meter

    Company: Diverse Technologies

    The Diverse Ferrite meter MF300F+ measures the Ferrite number (FN) of austenitic and duplex stainless steel weld material. It has a probe that is sensitive to ferrite content in a 10 mm area to a depth of approximately 1 mm. The instrument is calibrated using the secondary world standards held at The Welding Institute. All 16 standards are used in the calibration giving an instrument with a measurement range from 0 to 115 FN.

  • CG-6 Autograv™ - Gravity Meter

    Company: Scintrex Limited

    The CG-6 Autograv™ is the next generation land gravity meter combining a modern, intuitive user interface with our renowned quartz sensor technology housed in a rugged yet lightweight enclosure. The new CG-6 offers fast, reliable and precise gravity measurements and includes an array of mapping and post processing functionality with our new Lynx LG software conveniently installed on the tablet computer, provided as a standard feature.

  • VM6360 - Vibration Meter

    Company: Guangzhou Landtek

    Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.-------------------Is pecifically designed for present measuring various mechanical vibration. So as to provde the data for the quality control, run time and equipment upkeep.------------------Iuse the high-performance acceleration meter, realize the repetitiveness and accurate measurement.-------------------We are the MANUFACTURER of measuring instrument in CHINA. ------------------For more details, please feel free to contact us. Thank you! --------------------MAIL: sales4@landteknet. com ------------------WEB: www. landtek. cn/en/

  • V-Cone - Flow Meter

    Company: McCrometer

    The V-Cone Flow Meter is an advanced differential pressure instrument, which is ideal for use with liquid, steam or gas media in rugged conditions where accuracy, low maintenance and cost are important. With its DP built-in flow conditioning design, the V-Cone is especially useful in tight-fit and retrofit installations in which the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are either impractical or unavailable.

  • PLMT56 - Light Meter

    Company: Pyle Audio

    Light Meter Measures In LuxOver-Range IndicatorLong-Life Silicon Photo Diode InsideMeasurement Rate: 1.5 Times per SecondMax Range: 50,000 LuxAccuracy: +/- 5% Under 10000 Lux, +/- 10% Over 10000 LuxMax Resolution: 0.1 LuxDimensions: 7.40' H x 2.52' W x 0.96' DAccessories Included: 12V A23 Battery, Photo DetectorSold as : Unit

  • PLMT68 - Light Meter

    Company: Pyle Audio

    Light Meter Measures In Lux and Foot Candles (User Selectable)Over-Range IndicatorAuto RangingPeak Hold, Max and Data HoldRelative ModeLong-Life Silicon Photo Diode InsideMeasurement Rate: 1.5 Times per SecondMax Range: 400,000 LuxAccuracy: +/- 5% Under 10000 Lux, +/- 10% Over 10000 LuxMax Resolution: 0.1 Lux/FCAccessories Included: 9V Battery, Carrying Case, Photo DetectorDimensions: 6.50' H x 2.99' W x 1.69' DWeight: 14.22 oz.Sold as : Unit

  • Model L20 pH/ORP - L20 Meters

    Company: Electro-Chemical

    The Model L20 pH/ORP/Temperature meter is an AC line powered or battery powered precision instrument. The Model L20 features auto buffer recognition during calibration for both USA Standard and NIST pH buffers. The L20 has automatic temperature compensation and it monitors the electrode’s slope and offset reporting the electrodes efficiency assuring that the measurement is correct.

  • 101H - LCR Meter

    Company: AB Instruments

    Model AB-101H is an economically priced LCR meter. It is Micro-processor based with basic accuracy of 0.25%.It offers various test frequencies ,can display Q ,has internal Bias for electrolytic capacitors. LC & R are two selectable functions with auto-ranging facility .Four wire measurement minimizes error in reading. Range locking facility provides fast measurements at production centers. SER & PAR modes are available.

  • 101A / 102A - LCR Meter

    Company: AB Instruments

    Model AB-101A is a Micro-Controller based precision LCR meter. With basic accuracy of 0.2 %.it offers various test frequencies ,can display two selected parameters simultaneously, has internal Bias for electrolytic capacitors. Auto mode gives auto ranging & automatic component identification. Four wire measurement minimizes error in reading. RS232 Communication & Binning facilty upto 8 bins possible. Loading of pre-setted parameters also possible to save time.

  • 1G DSP - Maintenance Meter

    Company: Trilithic

    The 1G DSP is an advanced maintenance meter specifically tailored for maintenance and troubleshooting of advanced services such as Gigabit electrical/optical Ethernet, N-Speed wireless access points, Optical Power Measurement & Visual Fault Location. Featuring fast measurements and powerful troubleshooting tools the 1G DSP comes equipped with all the tests a maintenance tech needs to measure both Analog and Digital signals.

  • KT7160 - Clamp Meter

    Company: KTI Ketai Instrument

    *Analogue current clamp meter in a handy and compact housing *8 ranges in 4 functions *AC current measurement up to 300A(±5% full scale) *AC voltage measurement up to 600V(±5% full scale) *Resistance measurement up to 200kΩ(±5% full arc) *Temperatur measurement up to 150° C/300 ° F *Maximum jaw opening 20 mm *Power supply: 1×1.5V,IEC LR03/AAA *Fuse 0.5 A/250V *EN 61010,CAT II/300V

  • KT7170 - Clamp Meter

    Company: KTI Ketai Instrument

    *Analogue current clamp meter in a handy and compact housing*8 ranges in 5 functions*AC current measurement up to 400A (±5% full scale)*AC Voltage measurement up to 600V(±5% full scale)*DC Voltage measurement up to 60V(±5% full scale) *Resistance measurement up to 1k ohms(±5% full arc) *Clamp opening 28 mm*Power supply: 1x1.5,IEC LR03 AAA*Fuse 0.5A /250V*EN61010, CAT II 600V

Products

Applications

Manufacturers