Filter Results By:

Products

Applications

Manufacturers

Meters

sense and display measures of gas, water, electricity, particles, vibration or light.


Showing results 3901 - 3915 of 4251 products found.

  • SAX/PAX

    SecuControl inc.

    SAX is a surface mount terminal / test block combination for interfacing substation devices (protection relays, fault recorders, revenue meters, . . . ) to the voltage and current transformers and to other equipment on the system side of a power grid. PAX is a test plug keyed to a particular configuration of SAX blocks. Once inserted into the corresponding SAX block, the PAX plug isolates the substation devices from the system side equipment while at the same time allowing connection of test equipment for secondary injection tests.

  • Signal Simulation Test System

    Z2090B-032 - Keysight Technologies

    The Z2090B-032 Signal Stimulator Test Set (SSTS) provides generationand measurement of two individual and/or combined RF signals which are routed to one of four RF outputs. The RF signals are generated by two Keysight vector PSG signal generators which are capable of generating RADAR and communications signals from 50 MHz to 20 GHz. Measurement capability is provided by a Keysight PSA signal analyzer and a Keysight RF power meter.

  • Signature Model Surge Testers

    SP - PJ Electronics, Inc.

    Surge / DC Hi-Pot testing capabilities. Tektronix TDS1002, 1 Billion Samples/sec, real time, programmable, storage oscilloscope plus a DC Hi-Pot Tester. DC Hi-Pot testing with dual LED panel meters that display direct read out of current and voltage, with overcurrent safety trip. This dual tester combo is still capable of testing 3 phase motors with or without rotors.

  • RF Signal Generator 51 MHz to 6.6 GHz

    SynthNV PRO - Windfreak Technologies, llc

    The SynthNV PRO is a highly calibrated 51 MHz to 6.6 GHz RF Signal Generator plus 8 GHz broadband RF detector / power meter. The SynthNV accomplishes Scalar Network Analysis for both through and reflected responses of RF devices such as filters, amplifiers, antennas, cavities and matching networks. Sweeps run at 100uS per point. Notably, the SynthNV PRO also has a 16 band high speed switching harmonic filter on its output that attenuates harmonics up to 60 dBc.

  • Portable Hydraulic Testers

    Badger Meter

    Flo-tech portable hydraulic testers simultaneously measure the flow rate, temperature and pressure of hydraulic fluid. Flow rates are derived from an internal turbine meter assembly. These units were designed for testing pumps, valves, cylinders, motors, hydrostatic or power shift transmissions and power steering systems in both mobile and stationary applications. When used in a preventive maintenance program, untimely or catastrophic repairs are minimized. Three families of testers are available to provide operators with the perfect solution that fits their needs, each quipped with a carrying handle to improve portability.

  • Portable Multi-Functional Measurer

    Shaanxi Hitech Electronic Co.,Ltd.

    Portable multi-functional measurer is based on LXI framework, integrating functions of 6 all-purpose measurers including high-speed data stream (HSDS), dynamic signal analyzer (DSA), multi-functional phase meter (PMeter), digital multi-meter (DMM), digital oscilloscope (Scope) and signal source (Source). This measurer, being small, light and multi-functional, can be used for various inspections and measuring, particularly for military outdoor actions.

  • Portable Multifunction Calibrator

    M143 - Clarke-Hess Communications Research

    The M143 Multifunction calibrator is a cost saving solution for calibration of electric meters with up to 1000 V and 20 A. It offersa basic accuracy of 0.01% in DC voltage for calibration of 3 and 4 digit multimeters. The resistance function is covered byeight fix resistors in range from 10 to 100 M. The calibrator offers TC temperature sensor simulation. It can be deliveredoptionally as well with RTD temperature sensor simulator. Thanks to its small dimensions and low weight the unit can be usedeasily for field calibration work.

  • Portable Relay Tester

    AJIT Electronics Co.

    The protective devices such as relays, overload coils, circuit breakers must be checked regularly to ensure that, they are always ready to operate correctly. If a fault occurs in the equipment, which they are protecting, routine relay testing will quickly detect the faulty, incorrectly adjusted protection circuit and will possibly prevent serious damage to plant or injury to personnel. Apart from checking the protective circuits correctly, it is usually necessary to measure its operating time. The micro controller based time interval meter is used for this purpose in all AJIT brand relay tester.

  • Power Electronics Test Solution

    Chroma ATE Inc.

    Chroma Power Electronics Test Solutions not only apply in the industries of Information Technology, Communication, Aerospace and National Defense, but also in energy efficient products such as Hybrid Automobiles, LED luminance devices, solar and fuel cells that are developed aggressively under the pressure of natural resource constraints. Chroma has a wide variety of instrumentation including AC Power Sources, DC Power Supplies, DC Electronic Loads, AC Electronic Loads, Digital Power Meters, and Automatic Test Systems that are ideal for power input/output terminal tests and dynamic simulation.

  • Protection Relay Test Set

    K10 Series - KINGSINE Electric Automation Co., Ltd.

    Adopts 6.4 large LCD screen, and provided with VGA video interface, making it available to connect to projector for training;2. With alarm function of housing grounding testing and external voltage input, to guaranty personal security;3. Offer independent Aux. DC to tested devices, 0 ~ 300V/0.6A(Poleless and adjustable);4. Two in one of meter and source, with function of both internal and external testing, self-calibration, oscillograph, and the duration of each oscillograph reaches 50S (optional function);

  • P-Trak® Ultrafine Particle Counter

    Meter 9565 - TSI Inc.

    The VELOCICALC® Multi-Function Ventilation Meter 9565 features a menu-driven user interface for easy operation in your local language. On-screen prompts and step-by-step instructions guide the user through instrument setup, operation and field calibration. The 9565 also features an ergonomic, overmolded case design with probe holder and a keypad lockout to prevent tampering during unattended use. The 9565 model includes the Straight Air Velocity Probe 964 and is designed to work with a wide range of plug-in probes. .

  • Pulsed and CW lasers, 375 – 1700 nm, 1 kHz measurement rate

    871 Series - Bristol Instruments, Inc.

    The 871 Laser Wavelength Meter from Bristol Instruments is the best way to measure the absolute wavelength of both pulsed and CW lasers and OPOs. By combining proven Fizeau etalon technology with automatic calibration, the reliable accuracy needed for the most meaningful experimental results is ensured. What’s more, a sustained measurement rate of 1 kHz enables the wavelength characterization of every single pulse for most lasers. And, the resulting time resolution of 1 ms provides the most detailed analysis of tunable lasers.

  • Push Pull Testers

    IMADA, Incorporated

    Lever-operated manual systems enable rapid push/pull testing up to 220 lbf.Wheel-operated manual systems enable slower, more precise movement with the hand wheel up to 750 lbf.Motorized push/pull testers offer the most control and highest degree of repeatability with the ability to set a constant test speed and range of movement up to 1100 lbf.All push/pull testers can be configured with a digital force gauge with data output for analysis by data acquisition software. An optional digital distance meter to measure displacement is available.

  • Probes, Cables & Detectors

    Arrow Tech

    Probe has a mica window that has a thickness of 1.8 to 2.0 mg/cm2. This allows detection of alpha radiation as low as 3.0 MeV when in close proximity to the window. Beta radiation in excess of 35 keV and X-ray or gamma radiation greater than 6 keV can also be deteched. The detector is provided with a BNC connector. It can be used with most count rate and survey meters which accept Geiger Mueller (GM) detectors operating at 900V DC.

  • PROFESSIONAL 3-AXIS EMF DIGITAL GAUSSMETER

    FWBELL 4000 series - Integrity Design and Reseach Corp.

    Typical Applications include checking the 50 and 60 Hz magnetic fields (EMF) produced by equipments such as AC Power Lines, Office Equipment, Video Display Terminals, Household Appliances, home and Building Inspection, etc.. Magnetic fields are invisible radiations, the best method to measure the strength fields is to use one of the accurate gauss meters offer by Integrity Design & Research corp.