Showing results 4396 - 4410 of 4461 products found

  • BLU-FUZE Mortar Series - Telemetry Systems

    Company: Syntronics

    The BLU-Fuze Series In-Flight Telemetry Systems provide an extensive selection of shock hardened sensors to measure in-bore and in-flight performance of mortars and projectiles. All BLU-Fuze configurations include an integrated S-Band telemetry transmitter and antenna which relays the measured data to a ground station. The typical range of the telemetry exceeds 20,000 meters. The BLU-Fuze is conveniently packaged in the NATO standard fuze envelope for either artillery or mortar rounds so that it can add flight instrumentation and telemetry to a wide variety of munitions without any modifications to the munitions themselves. The BLU-Fuze is simple to use. The BLU-Fuze is activated when the battery pack is attached to the fuze body. The BLU-Fuze is then screwed into the fuze well of the mortar to be tested. Once activated, the BLU-Fuze will run for more than 45 minutes, providing ample time to verify the telemetry link, acquire GPS, load, and launch the projectile. Data is stored and transmitted after the round clears the bore beginning 100 msec before detection of the launch event.

  • BLU-FUZE Artillery Series - Telemetry Systems

    Company: Syntronics

    The BLU-Fuze Series In-Flight Telemetry Systems provide an extensive selection of shock hardened sensors to measure in-bore and in-flight performance of mortars and projectiles. All BLU-Fuze configurations include an integrated S-Band telemetry transmitter and antenna which relays the measured data to a ground station. The typical range of the telemetry exceeds 20,000 meters. The BLU-Fuze is conveniently packaged in the NATO standard fuze envelope for either artillery or mortar rounds so that it can add flight instrumentation and telemetry to a wide variety of munitions without any modifications to the munitions themselves. The BLU-Fuze is simple to use. The BLU-Fuze is activated when the battery pack is attached to the fuze body. The BLU-Fuze is then screwed into the fuze well of the projectile to be tested. Once activated, the BLU-Fuze will run for more than 45 minutes, providing ample time to verify the telemetry link, acquire GPS, load, and launch the projectile. Data is stored and transmitted after the round clears the bore beginning 100 msec before detection of the launch event.

  • ETS-200T / ETS-200T-FT - Test System

    Company: Teradyne

    The ETS-200T / ETS-200T-FT discrete test platform is built on proven ETS technology and provides true index-parallel testing specifically for turret and rotary handlers. These test systems maximize throughput with pattern-based test techniques based on Eagle SmartPin™ technology coupled with the use of dynamic Cbits for enhanced user control. Both the ETS-200T and the ETS-200T/FT provides a complete test solution from wafer sort to final test for MOSFETs, including integrated control and datalogging for UIL, dVSD, Qg and LCR meter. Raptor™ software reduces program generation by providing a graphical user interface that does not require any programming experience combined with a robust set of test libraries and proven test techniques to increase test volumes and reduce cost of test.

  • P4455 Power Monitoring For Dummies - Power Monitor

    Company: P3 International

    Now anyone can cut electricity costs and find out what appliances are worth keeping plugged in. Simply connect an appliance to the meter, and it tells you the monthly cost. The unit measures consumption by the kilowatt hour — the same way as your local utility company.By using this device, you can figure out how efficient each appliance actually is. Now you can decide if it's finally time to get that shiny new refrigerator you've been eyeing or if your old air conditioner is the power hog you thought it was.You can calculate your cumulative electrical expenses and forecast usage by the day, week, month, or even an entire year. Also check the quality of your power by monitoring the voltage. With Power Monitoring For Dummies, you can now know "watts" killing you.

  • MFF-1 - RF Multifrequency Filter

    Company: ROM-Elektronik GmbH

    Since 2003 on the market and more current than ever! For us, it was already clear at this time what importance the service-specific analysis of high-frequency signals has and will have. We are very pleased that this vision has also found its way into the current SBM2008 (standard of construction-based measurement technology). The MultiFrequency filter MFF-1 enables precise measurement of common services - simply by means of a selector switch, without a large investment in a spectrum analyzer and without complicated settings on the device. The filter is simply connected between the measuring antenna and the HF meter - ready. The MFF-1 only allows the frequencies that are selected! There are six switch positions available: base stations D-network and E-network, DECT, base station UMTS, WLAN / Bluetooth, microwave oven and broadband (all frequencies).

  • Reflectometers

    Company: Luna Technologies

    High resolution OFDR – Resolve individual features with spatial resolution down to 10 microns.High sensitivity – 70 dB of dynamic range and -130 dB sensitivity.Long range – Measure up to 2000 meters in length with a single connection, single scan.Single Connection IL and RL – Measure insertion and return loss in a single scan.Locate loss events – Monitor backscatter levels to isolate losses due to bends, crimps, bad splices, etc.“Look inside” devices – High resolution and sensitivity enable inspection of individual components within a subsystem.Polarization Tracking – Track changes in the state-of-polarization as light propagates through an optical network.Intuitive graphical interface – All key data and graphs in a simple, easy to use interface.Distributed sensing – Use standard optical fiber to monitor the changes in temperature and strain

  • SY017 - Recipe Batch Controller

    Company: Synectic Electronics

    This Multi recipe batching system offers a stand alone complete weighing, monitoring and process control solution, with non-volatile memory storing up to 100 recipes. The SY017 can be fully integrated into a factory network or with a PC give unlimited recipe storage and control. Weight measurement is achieved with an 18bit ADC, and the built-in excitation supply will drive up to four 350Ω load cells. An optional flow meter input is also available. The unit controls the switching of up to 17 valves, motors, pumps or contactors etc. using relays rated at 5A 250V AC or 5A at 30V DC. A 4-20mA output is available as an option for remote indicators or a variety process control applications. speed control of mixers conveyors etc.

  • CNG-EbNo - SNR Noise Generator

    Company: Noisecom

    The CNG-EbNo is a fully automated precision signal to noise (AWGN) generator that sets, and maintains a highly accurate ratio between a user supplied carrier and internally generated noise, over a wide range of signal power levels and frequencies. The internal AWGN meter provides repeatable SNR waveforms for accurate signal generation. The instrument gives system, design, and test engineers in the telecommunications industry a single tool to generate precision signal to noise ratios. These signals are used to compare theoretical BER to SNR ratios, found in "waterfall" type graphs, with measured values from the DUT to evaluate different modulation schemes. Users can obtain higher yield through automated testing, plus increased confidence from repeatable, accurate test results. Standard units can be modified for specific customer requirements. Please consult the factory for pricing and availability of these requests.

  • PA2100 - PC Controlled Bench Top Power Analyzer

    Company: Powertek

    The PA2100 is a PC controlled bench top power analyzer, allowing several electrical power measurements to be taken simultaneously during testing - from just one set of input connections. The PA2100's power measurement ability is a must in research and development, manufacturing and required for certification and traceability of manufactured goods. In addition to power measurements, apparent power (VA), harmonics, voltage, current, power factor can all be viewed and stored with ease. The PA2100 wattmeter simply connects between the ac supply and the load, various current transformer options allow measurement with any size of current from 10mA to 10000A. Typical watt meter applications include appliance testing; microwave ovens, electric stoves, heating, air conditioning, TVs, monitors, computers, electronic lighting, fans and motor controllers. Powertek wattmeters are equipped with 4mm/banana safety terminals along with optional "breakout" boxes and clamp current probes for fast and safe measurement.

  • AQ1000 - OTDR

    Company: Yokogawa Meters &

    Yokogawa Meters & Instruments Corporation will add an entry-level model, the AQ1000, to its range of OTDR (Optical Time-Domain Reflectometer) test instruments. The new model will be launched for sale outside Japan on April 13th. The new instrument complements the company’s mid-range AQ1200 Series and the high-end AQ7280 Series, and is specifically designed to increase the productivity of field personnel working on the installation and deployment of optical access networks such as Fiber To The Home (FTTH): the so-called “last mile” to consumers’ premises. The worldwide use of these optical access networks is increasing dramatically as the FTTH network structure is more and more adopted by the telecom operators, and optical fibers replace the copper cables in each household. Consequently, more and more installers will be working on fiber-optic deployment over the last mile. These installers will not need high-end OTDRs capable of measuring over hundreds of kilometers in the core network. Instead, they will need affordable OTDRs equipped with all the features which can make their job easier and faster: instruments like the Yokogawa AQ1000.

  • Vertical - HACV Load Banks

    Company: Hillstone Products

    Our vertical design offers a compact modular 3 phase load bank from 400kW to 1500kW, 380V to 690V, 50Hz or 60hz.The load banks are designed for either portable or fixed installations based on resistive unity phase load testing.The HACV range have 2 control modes can be supplied as an economy price range with manual panel controls or with remote hand held controller and the option for PC interfacing. The Hillstone HACV series load banks offer a low cost solution to on-site AC testing of generators and UPS systems. Units incorporate vertical force cooling with high powered resistor elements controlled via panel mounted switches. Safety features including HRC fuse protection, fan failure / phase reversal shut down and emergency stop push button. A panel mounted power meter, hand held controller, PC interface with data logging is also available as optional extras

  • HW-3109 - Hand Held Optical Light Source

    Company: Shanghai Fibretool

    HW-3109 optical light source can provide 1 to 4 output wavelengths to meet specific requirements, including the 650nm red source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer needs. Together with the JW3208 optical power meter, it is a perfect solution for the fiber optic network characterization. - Provides 1~4 output wavelengths which can be optional according to customer’s needs - CW,2Hz modulation output at 650nm, and CW, 270Hz,1KHz,2KHz - Moduilation output at other wavelengths - High stability of the output power - Stable output wavelength - Backlight LCD display supports night operation - Compact size and decent appearance - Large LCD, easy operation

  • MS500 Series - Handheld Oscilloscope

    Company: Shenzhen Micsig Instruments

    In handheld oscilloscope market, I am afraid that only Micsig handheld multi-function oscilloscope can be regarded as a true oscilloscope and others can be called scope only.Moreover, it’s function no less than desktop oscilloscope, as it designs lightweight and uses double injection plastic mould making oscilloscope high IP level; Real leather belt design, exclusively detachable battery design & supporting indoor & outdoor display mode make it become your good assistant in field working.Using 5.7 inches 640*480 pixels industry TFT LCD touch screen; Supporting button, touch and scroll wheels operation mode; Integrating scope, meter & recorder in one unit; Up to 190,000wfm/s capture rate & 240Kpts memory depth; Supporting including CAN,LIN,SPI,I2C,UART,1533B and 429 serial bus trigger & decode functions.

  • MS300 Series - Handheld Oscilloscope

    Company: Shenzhen Micsig Instruments

    If you want to buy an isolated handheld oscilloscope with a low budget, MS300 is your best choice absolutely.In handheld oscilloscope market, I am afraid that only Micsig handheld multi-function oscilloscope can be regarded as a true oscilloscope and others can be called scope only.Moreover, it’s function no less than desktop oscilloscope, as it designs lightweight and uses double injection plastic mould making oscilloscope high IP level; Real leather belt design, exclusively detachable battery design & supporting indoor & outdoor display mode make it become your good assistant in field working.Using 5.7 inches 640*480 pixels industry TFT LCD touch screen; Supporting button, touch and scroll wheels operation mode; Integrating scope, meter & recorder in one unit; Up to 50,000wfm/s capture rate & 240Kpts memory depth; Supporting including CAN,LIN,SPI,I2C,UART serial bus trigger & decode functions.

  • OTDRs and Fault Locators

    Company: AFL

    AFL optical time domain reflectometers (OTDRs) and fault locators are used to certify new fiber installations and locate faults in deployed fiber optic networks. OTDRs and fault locators are available for both multimode and single-mode networks, including FTTx PONs. OTDRs scan fiber optic networks from one end of the fiber, displaying a trace and reporting detected events such as splices, connectors, micro- or macro-bends and fiber end. Fiber length is reported along with location, loss and reflectance of detected events. Several OTDRs are available with an integrated visual fault locator (VFL), optical light source (OLS), and/or optical power meter (OPM). OTDR results can be saved and uploaded to PC for further analysis and/or archiving.

Products

Applications

Manufacturers