Meters: sense and display measures of gas, water, electricity, particles, vibration or light.

Showing results 5221 - 5235 of 5335 products found

  • Energy Data Concentrators

    Company: Advantech Co. Ltd

    Advantech''s provides a series of high quality Energy Data Concentrators and Power meters to strengthen building automation system. Our Energy Data Concentrator supports serial communication ports and several networking interfaces. In addition, pre-installed with Advantech''s WinCE WebAccess management software, the Energy Data Concentrator is browser-controlled, whose Web Server function increases flexibility and convenience, making it easy to configure and maintain the building automation system via the Internet. With a built-in driver, the powerful data concentrators BEMG-4110/4220 can make multi-thread communication and collect data from a wide variety of building automation system equipment and devices.

  • SCANBOOSTER/PCIe-DT

    Company: GOEPEL Electronic

    The SCANBOOSTER/PCIe-DT consists of a PCI Express plug-in card coupled with an external controller unit, whereby distances can be up to four meters. It provides two fully independent TAPs and supports a programmable TCK frequency up to 16 MHz.Both TAPs use externally controlled active test heads (exclusively). By utilizing GOEPEL electronic's TIC01 (TAP Interface Card) modules serving as interface between controller and UUT, some of the SCANFLEX® advantages apply. That means both TAPs are independently programmable with regard to output voltage, input voltage, output impedance and input impedance.

  • SCANBOOSTER/PCI-DT

    Company: GOEPEL Electronic

    The SCANBOOSTER/PCI-DT consists of a PCI plug-in card coupled with an external controller unit, whereby distances can be up to four meters. It provides two fully independent TAPs and supports a programmable TCK frequency up to 16 MHz.Both TAPs use externally controlled active test heads (exclusively). By utilizing GOEPEL electronic's TIC01 (TAP Interface Card) modules serving as interface between controller and UUT, some of the SCANFLEX® advantages apply. That means both TAPs are independently programmable with regard to output voltage, input voltage, output impedance and input impedance.

  • Model 2500INT-2-IGAC

    Company: Keithley

    The Model 2500INT Integrating Sphere is the latest addition to Keithleys growing line of solutions for LIV (light-current-voltage) testing. When connected via a low-noise triax cable to the Model 2502 Dual Photodiode Meter included in Keithleys LIV Test System, the integrating sphere allows the system to make direct measurements of optical power, with results expressed in watts. The integrating sphere simplifies production testing of laser diodes (LDs), light emitting diodes (LEDs), and other optical components by eliminating common optical power measurement problems related to detector alignment, beam profile, polarization, and back reflection.

  • Model 6517A

    Company: Keithley

    Keithley's 6-1/2-digit Model 6517A Electrometer/High-Resistance Meter is the ultimate tool for performing high-resistance measurements (1Mohms to 1015ohms). Its 1fA measurement noise, coupled with its ±1kV voltage source, makes it extremely flexible for many resistance applications. In addition, its unique alternating polarity resistance method enables repeatable measurements, even in circumstances where background currents previously made measurements impossible. It also excels at all electrometer functions. Its exceptional 200Tohms input impedance in voltage measurements, its current measurement range from 1fA to 20mA, and its charge measurements from 10fC to 2µC, make it a very versatile product

  • Model 2500INT-2-Ge - Integrating Sphere with Germanium Detector

    Company: Keithley

    The Model 2500INT Integrating Sphere is the latest addition to Keithleys growing line of solutions for LIV (light-current-voltage) testing. When connected via a low-noise triax cable to the Model 2502 Dual Photodiode Meter included in Keithleys LIV Test System, the integrating sphere allows the system to make direct measurements of optical power, with results expressed in watts. The integrating sphere simplifies production testing of laser diodes (LDs), light emitting diodes (LEDs), and other optical components by eliminating common optical power measurement problems related to detector alignment, beam profile, polarization, and back reflection.

  • MTSA-450-NL - Controlled Test System

    Company: ElectroChem

    MTSA-450 is a cost effective fuel cell test station which puts together a gas management unit, a humidification system and an electronic load that provides a complete control features for conducting reliable fuel cell testing. All gas channels have stainless steel construction. The gas management unit consists of 2 gas flow meters, 2 back pressure regulators and 2 pressure gauges. The humidification system includes two 1,5 liter stainless steel water vessels and provides 100 % humidification with gas flow rates up to 3 SLPM. The temperature of the fuel cell and two gas humidifiers is controlled by three temperature controllers.

  • 10G SFP+ - CABLES

    Company: Poflink Sfp-xfp

    POFLink stocks a large selection of SFP+ cables, including passive SFP+ cables, active SFP+ cables and SFP+ active optical cables. Our 10G SFP+ Cables offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet and service provider transport applications, such as switches, routers, media converter, and other data communication equipments. These cables comply with the latest IEEE and MSA standards for twin-axial cable patch cord assemblies over distances of up to 15 meters. All of our SFP+ products are ROHS compliant, and we can customize any cable to meet your specific needs.

  • MA2400xA - Thermal Sensors

    Company: Anritsu

    The Anritsu MA2400xA series thermal sensors are designed for use with the ML2430, ML2480 and ML2490 series power meters. These sensors provide excellent power measurement accuracy over 50 dB of dynamic range. Thermal sensors use Seebeck elements where the combined effect of a thermal gradient and charge migration between dissimilar metals gives a true reading of the average power of any incident waveform. Anritsu thermal sensors have class leading SWR and built in EEPROM with calibration factor and linearity correction data. This results in assured accuracy when measuring any signal.

  • MA2400xA series thermal sensors

    Company: Anritsu

    The Anritsu MA2400xA series thermal sensors are designed for use with the ML2430, ML2480 and ML2490 series power meters. These sensors provide excellent power measurement accuracy over 50 dB of dynamic range. Thermal sensors use Seebeck elements where the combined effect of a thermal gradient and charge migration between dissimilar metals gives a true reading of the average power of any incident waveform. Anritsu thermal sensors have class leading SWR and built in EEPROM with calibration factor and linearity correction data. This results in assured accuracy when measuring any signal.

  • Power Master MA24507A - Frequency Selectable mmWave Power Analyzer

    Company: Anritsu

    Power Master is an ultraportable, USB-powered mmWave power analyzer which enables simple, numeric frequency-based measurement of RF power from 9 kHz to 70 GHz and as low as -90 dBm. Traditional power meters are broadband and have limited power ranges, so engineers and technicians are using spectrum analyzers which include many unneeded features, cost hundreds of thousands of dollars, and take up half the test bench just to make simple, frequency-based RF amplitude measurements. Power Master enables those measurements in a USB-powered device slightly bigger than a smartphone and at a fraction of the price of a spectrum analyzer.

  • Model 6025

    Company: Anritsu

    Handheld Loss Test Set for measuring power, attenuation and Optical Return Loss (ORL). The Loss Test Sets Model 6025 are fast and easy-to-use handheld Power Meters and Loss Test Sets designed for attenuation and power throughput measurements for point-to-point fiber optic links. Also, high power versions of the Model 6025 are ideal for optical amplifier characterization and CATV applications. They feature a rugged design, built to withstand the difficult testing environment of fiber optic cable installation and maintenance. Calibrated at five wavelengths (850, 1300, 1310, 1550, and 1625 nm), these instruments are ideal for testing all singlemode and multimode fiber applications.

  • CMA 4000i

    Company: Anritsu

    The NetTest CMA 4000i Optical Test System provides the most complete test and measurement solution for the All-Optical Network. With its modular design, the instrument can be configured to meet the most demanding requirements for a variety of applications from fault location to testing Dense Wavelength Division Multiplexing (DWDM) systems. The CMA 4000i can be configured as an OTDR with a Visual Fault Locator, Optical Power Meter, and Light Source, or as a high resolution Optical Spectrum Analyzer (OSA) for DWDM systems. With its variety of functions, the CMA 4000i clearly offers the best value for optical network commissioning, troubleshooting, restoration, and maintenance applications.

  • MT8860B - WLAN Test Set

    Company: Anritsu

    The MT8860B is an integrated one-box test set dedicated to testing 802.11 WLAN devices. MT8860B provides a high-speed measurement solution that is suitable for both production testing and design proving. The MT8860B replaces existing test systems that typically require power meters, spectrum analysers, and Gold Radios with external attenuators. The result is a test instrument that is faster to integrate into production, offers a universal solution for all WLAN chip sets, and is simpler to maintain and calibrate. The MT8860B reduces test system costs, increases production throughput, and delivers the most flexible WLAN testing available.

  • VLMS - Valve Leak Measurement System

    Company: G Systems

    The G Systems Valve Leak Measurement System (VLMS) reliably measures slow leaks that are unidentifiable with conventional leak detectors, helping manufacturers test and ensure that critical valves are absolutely airtight. The G Systems VLMS is a self-contained counting instrument for automating the industry-standard practice of leak detection by bubble formation using a submerged tube in water. The G Systems VLMS provides accurate measurement of leaks that are too small for conventional flow meters to reliably detect and is ideal for applications that must be absolutely airtight, including medical device, pharmaceutical, oil and gas, and plumbing valves.

Products

Applications

Manufacturers