Meters: sense and display measures of gas, water, electricity, particles, vibration or light.

Showing results 5371 - 5385 of 5387 products found

  • BB705 - Tempurature Reference Source

    Company: Omega Engineering

    This BB705 is a blackbody temperature reference source which is adjustable over the range from 100 to 1046°C (212 to 1915°F) and accurate to ±1°C, ±0.25% rdg. It has a built-in digital temperature controller to provide accurate, stable temperatures as well as to provide the temperature readings of the cavity. The heated cavity provides a target of known temperature and emissivity, and virtually any infrared pyrometer with a spot size diameter less than 44.5 mm (0.88") can be calibrated. Calibration setups are easy with the BB705. An independent NIST traceable probe and high accuracy panel meter provide temperature reference information. Both models come standard with an RS-232 computer interface which allows computer control of the setpoints for automatic test applications. A NIST traceable calibration certificate is also provided.

  • M-LINK - Monitors

    Company: Gentec Electro Optics

    The Universal Meter Reads ALL Heads: Power: Thermopiles, Photo Detectors and Pyroelectrics Energy: Thermopiles (in single shot mode), Photo Detectors and PyroelectricsMeasure fJ Energy LevelsThanks to a unique digital method for suppressing the noise on the lower rangesExternal TriggerSynchronize you M-LINK to your pulsed laser or digital chopperDigital (USB) OutputConnect the M-LINK module directly to your PCPowerful LabView Software Features include: Complete instrument controls: Range, Trigger, Wavelength, etc. Live display in J and J/cm2 or W and W/cm2 Full Statistics: Min, Max, Mean, Standard Deviation, RMS Stability , Repetition Rate, etc. Graphic Displays: Strip Chart, Histogram, Tuning Needle and more Data File Collection and Analysis

  • 1400 - Miniature EMI/RFI Shielding gasket

    Company: Holland Shielding

    This is a very small EMI/RFI-shielding gasket, used for EMI/RFI shielding on for example on PCB's, smartphones and other applications where little space is available.Miniature EMI/RFI shield (1400 serie Miniature shield)This EMI/RFI gasket can be produced in such small widths that the height exceeds the width. It has a sufficient electromagnetic damping.Application- on PCB's or printed circuit board's- other products where there is very little space available and low compression force is required.- EM, RF, LF, HF, EMI, RFI shieldingThe material is a highly electrically conductive foam with or without a electrically conductive self-adhesive strip at the bottom. The electrically conductive foam can be compressed by even more than 50 % of its original height.The smallest width is 1 mm and the maximum height is 6 mm. Roll length of 1 until 1000 meters. (Depending on width and height of the EMI gasket)

  • Dl1 RS-485 - Data Collection Recorder

    Company: Chang Shuan Electronics

    DL1 is design to communicate through RS485 to read variety of devices (Such asinstrumentation, PLC, A / D conversion card ....) and stored the data collected into a SD card.Data can then be converted to Excel file format on a computer to perform analysis and production of related reports needed by users. This product not only read and record data speed up to 0.1 seconds, and its flexible software setting allows in many ways for easy planning. For multiple projects user, DL1 provide two project planning procedures which stored the data into two separate files. After all setting on software, parameter can be upload/download to DL1 using a USB interface cable. Recording can be start by external DI contact or by meter button. ADPro is the software provided with the hardware for setting parameters and procedures planning through the USB interface cable to the DL1. Today there are lots of field (such as industrial, energy, environment monitoring,commercial information ....),needs record process data, providing DL1 is rather inexpensive solution compare to present industrial recorder. DL1 give a simple, convenient and economical solution for all.

  • BE816A - Digital Anemometer

    Company: Bestone Industrial

    This Dual Function Meter simultaneously measures & displays air speed and temperature of the moving air. Super small in size and light weight but it has wide measurement range of 0~30m/s wind speed with accuracy of ±5% and -10~45°C (14~113°F) temperature with accuracy of ±2°C (±3.6°F). This digital handheld anemometer accurately displays wind speed in m/s, fpm, mph, kph and knots and temperature in Celsius (°C) or Fahrenheit (°F). It provides current, maximum, and average wind speed measurement plus it indicates wind chill. Also displayed is a Beaufort wind scale bar graph whose reading corresponds to the digital wind speed display.Larger anemometers can't usually do spot measurements accurately, but this device can! Detect deterioration in small ventilation equipment over time in vacuum cleaners and CPU fans etc.. Use this device to find out if your device is aging or slowing down! Ideal also for weather enthusiasts, lovers of kite flying, kite-surfing, wind-surfing, hang gliding, paragliding and sailing

  • Redundant Power Packages

    Company: Acopian Technical

    An Acopian Redundant Power Package is installed by simply connecting the AC input and DC output terminals. All wiring (including isolation diodes, output monitor circuits, switches, meters, adjustments and connectors) has been done for you.Output Redundancy: Each Redundant Power Package contains two identical power supplies with their outputs interconnected through a diode switching arrangement that will detect any fault condition, isolate it from the system output, and pass only the output of the other supply with no interruption of output power during the transition.Input Redundancy: All Acopian Redundant Power Packages may be operated with only one AC power source. However, two isolated sets of AC input connections are provided, so that two independent sources of input power may be used, to obtain the additional protection of input redundancy. A battery- backup power source (UPS) and/or a second power line from the power utility can be used to maintain output power without interruption when your primary source of AC power fails.Applications: Redundant Power Packages should be considered for any equipment where the highest attainable reliability is essential, and an unexpected loss of power would be disastrous. Such applications include communications systems (both voice and data types), computer systems (volatile memory systems in particular), process controls, utility and municipal systems, and security/safety alarm systems.

  • 6041G-HD - SDI video inserter

    Company: Instrumentation Technology

    The Model 6041G-HD is a ruggedized SDI video inserter. When the unit is placed within 100 meters of an SDI video source, the 6041G-HD enables accurate time stamping of each video frame/field. Time stamping prior to any compression and transmission of the SDI stream from a remote source such as a range camera, ensures that time recorded is accurate to within 10 microseconds of the frame or field sync.. Since the unit reclocks the SDI stream, it may also be used as a repeater extending the distance from the SDI video source to the transport insertion equipment (compressor, Ethernet, or other transport means). The unit auto-detects and decodes the imaging format permitting most SDI 480i/p, 720p or 1080i/p NTSC or PAL sources to be connected without having to change system settings. The time message may be inserted into the active video image, with the color (1 of 16) and location selected by the user. When selected, the time is also inserted into the SDI meta-data (vertical ancillary packets) in accordance with MISB STD 0605.3 and NATO STANAG 4609. The time reference is derived from either the internal GPS receiver or an external IRIG B time code source. If the GPS or IRIG lock is lost the unit will automatically continue to run on an internal clock.

  • RF Power Amplifier Automatic Measurement System

    Company: Acery Technologies

    RF power amplifier automatic measurement system consists of a new generation of science and technology is the German spectrum analyzer, RF and microwave signal source, network analyzers, noise figure analyzers, power meters, digital oscilloscopes, high performance DC power supplies, multimeter, low-frequency switching and digital I / O, custom RF and microwave switch matrix and other equipment and related equipment. These high-performance equipment not only provides incentives and analysis for the amplifier under test, but also provides a DC power supply and power amplifier circuit and other peripheral adjustment necessary. Meanwhile, the system sets the test signal conditioning, configuration and calibration test as one of the major parameters which can be accurately amplifier, fast and flexible testing. All equipment is controlled by the core of the test system software can be fully automated production test and manual type of R & D design type tested to meet the testing requirements of different stages. System software includes a convenient test mode conversion, simple and clear path and test switch interface, the main instrument soft front panel measuring device, and a measurement report in line with MS Word and Excel format and other functions.

  • M133C(i) - Three Phase Power & Energy Calibrator

    Company: Meatest S.r.o.

    Model M133C is compact one-housing three phase electric power/energy calibrator. It can supply unit under test with one phase accurate AC voltage and current with calibrated phase shift or DC voltage and current. Output voltage can be set in six ranges up to 600 V and output current in six ranges up to 30 A. Simulated electric power can be set independently in each phase. Frequency can be set in range from 15 Hz to 1 kHz with resolution 0.001 Hz to 0.01 Hz. Calibrator is equipped with 5 1/2 digital DC meter with DC ranges 20 mA or 10 V for direct calibrating of various types of power transducers. M133C calibrator offers two types of defined distortion of main sinusoidal output signal. The first distortion is based on adding defined amount of harmonic or interharmonic spectral components up to 5 kHz. The second type of distortion is based on amplitude modulation of output sinusoidal signal by sin or squarewave modulation signal in frequency range from 0.001 Hz to 50 Hz. Maximum depth of modulation is 30 %. Using supplied cable adapter the current outputs can be joined together offering one phase current range to 90 A AC/DC. M133Ci is low-cost version of M133C.

  • HD-TVI Tester

    Company: Fuzhou Metricu Technology

    IP camera tester with capacitive touch screen, display ONVIF IP camera image, ONVIF PTZ controller, support more than 40 customized IP cameras protocols, support video management software to view IP camera image, built-in WiFi to receive network image and data, FTP Server, Static IP address, DHCP, simultaneously test different segments´ IP cameras, Network bandwidth testing, PoE 24W power supply to IP camera, PoE voltage testing, HDMI signal output, support 1080P, support DC12V 2A power output to camera, USB 5V 2A power output to mobile phone, video level meter, cable tracer to find cable from messy cables, PoE port finder, link monitoring, ip camera´s ping testing, ip address scan, BNC input & output, both IP and analog images could be zoomed in 1-4 times and output, support snapshot, video recording and playback, built in 4G SD card, NTSC/PAL auto-selecting, video signal measurement,analog PTZ control, preset setting, UTP cable testing, PTZ data analyst, RS485 communication address scan, audio input testing and output, Led lamp, 7.4V DC 6600mAh lithium polymer battery, working for 17 hours, HD-TVI camera testing etc.

  • Unisim Compact Solar Simulator - Solar Simulator

    Company: TS Space Systems

    The Unisim Compact is a low-cost close-match solar simulator that provides the world-leading spectral match of our award winning Unisim solar simulators in a compact, bench top unit complete with IV measurement system. As with all our Unisim solar simulators, they exceed the ASTM, IEC and JIS international standards for spectral match and temporal instability. The easy-maintenance enclosure houses a TS-Space Systems 2-zone Unisim solar simulator which combines metal halide and incandescent sources via a proprietary filter system to give an AM0 close-match spectrum (AM1.5 drop-in filter sets are available). The standard system includes an embedded source meter with complete IV measurement system (Computer, GPIB interface, IV software, MS Excel), relative irradiance indicator for monitoring lamp intensity and an electrical shutter. Product support is very important to us. Training is provided at our premises where customers can take advantage of one-on-one tuition with the solar simulator designers and learn how to operate and maintain their tools. Extensive support via phone and email for the full lifetime of the instrument is included with every TS-Space Systems product.

  • FTE-5000 - Loss Test Set

    Company: Terahertz Technologies

    The FTE-5000 is a full featured ORL Loss Test Set. It has 4” super bright color touch screen display with large easy to read characters. It performs optical return loss measurements to -55db at up to three wavelengths and is an automated loss test set with dual or triple wave Light sources. The power meter uses an InGaAs detector which is calibrated at 850,1300, 1310, 1490, 1550 and 1625nm, with a dynamic range of -77dBm. These units are available in single, dual, triple or quad wavelength configurations and displays measurements up to three wavelengths at one time. In the Autotest mode, the master unit changes wavelengths at a fixed rate and informs the slave unit of the wavelength currently being measured. Use this method to test up to three wavelengths at a time and store the loss measurements for each of the lasers fired during the test. Up to 5000 tests may be stored and recalled via the unit’s USB port. Use TTI’s CertSoft PC application software for downloading stored data and organizing the information or use the Android Bluetooth virtual instrument application for remote operation.

  • TL81A - Deluxe Electronic Test Lead Kit

    Company: Fluke

    The TL81 kit consists of a quadfold nylon pouch containing two each (one black and one red) of the following items: One meter long test lead with a safety shrouded, right angle banana connector on one end and a stainless steel test probe on the other end, rated up to 10A. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures. Insulated alligator clip rated up to 5A. Insulated probe tip extender rated up to 3A. Modular test probe with banana connector in the handle, rated up to 10A. Modular hook-style clip test lead with banana connector, rated up to 5A. Modular pinch-style clip test lead with banana connector, rated up to 5A. Modular alligator clip with banana connector, rated up to 5A. Slide-on IC probe tip adapter (rated up to 3A) and test lead couplers. Bare spade lug with banana connector, rated up to 10A. CAT III 300VCompatible with Fluke and other multimeters that accept safety shrouded, standard diameter banana connectors. UL approved.One year warranty.

  • MT8212B

    Company: Anritsu

    Cell Master MT8212B is a comprehensive, one-box base station test tool for deploying, maintaining and troubleshooting wireless base stations. Combining the functionality of a cable and antenna analyzer (25 MHz to 4000 MHz), spectrum analyzer (100 kHz to 3.0 GHz), power meter (4.5 MHz to 3.0 GHz), transmitter analyzer(CDMA and GSM), transmission analyzer for 2-port devices, interference analyzer, channel scanner, GPS receiver and T1/E1 analyzer into one lightweight, handheld test set - eliminates the need for field engineer and field technician to carry, manage and learn multiple test sets. MT8212B measurement capability includes precision return loss, VSWR, cable loss, distance-to-fault, signal identification, interference analysis, channel power, adjacent channel power ratio, field strength, transmitter power, code domain power (CDP), burst power, two port measurement, multiple transmitted signals, power measurement, and T1/E1 measurements including DS0/VF channel monitoring. Patented RF interference rejection enables accurate, repeatable measurements in the presence of high RF activity. PC data analysis software enables assessment of system trends, problems, and performance in addition to professional report generation.

  • S331D Site Master - Cable and Antenna Analyzer

    Company: Anritsu

    Site Master Handheld Cable and Antenna Analyzer Model S331D covering the 25 MHz to 4000 MHz spectrum is the de facto industry standard for installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems. Accurate, versatile, affordable, rugged and a true handheld at under 5 pounds (including battery), Site Master is ideally suited for field technicians of any experience level working with VHF, broadcasting, paging, cellular, PCS/GSM, 3G, ISM, WLAN and WLL applications. S331D measurement capability includes precision Return Loss/SWR (also known as VSWR, for Voltage Standing Wave Ratio), Cable Loss and optional T1/E1 and power meter measurements. Frequency Domain Reflectometry (FDR) provides superior Distance to Fault (DTF) analysis to locate faults accurately. Patented RF interference rejection enables accurate, repeatable measurements in the presence of high RF activity. Data analysis software enables assessment of system trends, problems, and performance in addition to professional report generation.

Products

Applications

Manufacturers